Firms invite Poly Recovery to do their Dumpster diving

By Frank Antosiewicz
Correspondent

Published: December 26, 2012 6:00 am ET

Some of the recycled material Poly Recovery collects is converted into fibers that are used in shoe parts, blankets and carpeting. (Poly Recovery LLC photo)

Related to this story

Topics Materials, Suppliers, Sustainability, Recycling

PORTSMOUTH, N.H. (Dec. 26, 12:30 p.m. ET) — For Poly Recovery LLC, convincing companies like Redhook Brewery to turn trash to cash sometimes takes only a quick tour of the Dumpster.

That’s what Poly Recovery general manager Mike Mooney and CEO John Pelech wanted to do when they visited with Joe Thorner, general manager of Redhook’s Portsmouth brewery.

“We saw what they were putting in the dumpsters and basically what we said is: ‘What we can do is provide the same service, pick up on a weekly basis and cut the unit cost to nothing,’ ” Mooney said.

In the trash, they found PET green strapping used on pallets, low density polyethylene keg caps, and paper and plastic grain bags. There was also cardboard and foil lining from boxes of hops.

Reducing waste at Redhook also resulted in an added bonus.

“They came out with all the things that could be recycled and said that they would pick it up once a week and even pay us,” Thorner said.

Thorner said Portsmouth-based Poly Recycling now is recycling more than 10,000 pounds of Redhook’s waste material a month. In the first six months, Redhook recycled 63,143 pounds.

“We have teams that separate everything so that they can create specific recycling streams,” Thorner said.

As a result, the brewery — which is owned by Portland, Ore.-based Craft Brewers Alliance Inc. — is saving $2,910 a month on dumpster rental fees and no longer needs a compacter.

About 90 percent of the company’s waste is now reused, and employees have become more diligent about recycling. Redhook also composts its leftover food, and now works with Green Alliance, a partnership of local businesses focused on sustainability.

While both the recycler and brewer are located in Portsmouth, their effort spreads over a wider area. Poly Recovery takes the waste from Redhook and converts it to resin that is then shipped to local manufacturers.

One customer is Foss Manufacturing Co. LLC of Hampden, N.H., which uses the recycled material to make fibers that are used in shoe parts, blankets and carpeting.

Pelech started Poly Recovery six years ago. He developed a patented process to separate plastics and paper from pulp.

The company now has 16 employees and operates out of a 30,000-square-foot facility.

“Our industries are not just medical or breweries, but all types of wastes. We’re looking at every single store so they don’t fall into the dumpster,” Mooney said.


Comments

Firms invite Poly Recovery to do their Dumpster diving

By Frank Antosiewicz
Correspondent

Published: December 26, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

New York City officials avoid taking a stand on plastic bag fee

November 20, 2014 11:28 am ET

New York Mayor Bill de Blasio's administration claimed Nov. 19 to be committed to dramatically reducing plastic bag consumption in New York City, but ...    More

Image

Agilyx facing nearly $50,000 in fines from Oregon DEQ

November 20, 2014 11:59 am ET

Agilyx Corp., a plastic waste-to-oil company, is facing nearly $50,000 in fines for alleged hazardous waste violations at its Tigard, Ore., research...    More

Image

Environmental group focusing on producer responsibility in packaging

November 20, 2014 11:04 am ET

Athens, Ga.-based environmental group Upstream is out with a new paper entitled “Advancing Local Government's Interests through Extended...    More

Image

NS Farrington 'on track' to recycle 1 ton of PE per month

November 20, 2014 10:23 am ET

A polyethylene recycling program created by N.S. Farrington & Co. has passed the 60,000 pound mark.    More

Image

Total to buy majority stake in Polyblend

November 20, 2014 10:04 am ET

French oil and gas giant Total SA will buy a 68 percent stake in Germany's Polyblend GmbH, a subsidiary of Polymer-Chemie GmbH.    More

Market Reports

Plastics in Brazil - State of the Industry Report

This in-depth report examines the Brazilian plastics industry from a historical and geographical context. Our analysts provide insight on economic trends and forecasts, growing manufacturing sectors that utilize plastics, private investment opportunities, market environment challenges, and innovations in R&D.

Data tables and charts on producer prices, trade, plastics production and end market indicators is also included.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events