Firms invite Poly Recovery to do their Dumpster diving

By Frank Antosiewicz
Correspondent

Published: December 26, 2012 6:00 am ET

Some of the recycled material Poly Recovery collects is converted into fibers that are used in shoe parts, blankets and carpeting. (Poly Recovery LLC photo)

Related to this story

Topics Sustainability Materials Recycling Suppliers
Companies & Associations

PORTSMOUTH, N.H. (Dec. 26, 12:30 p.m. ET) — For Poly Recovery LLC, convincing companies like Redhook Brewery to turn trash to cash sometimes takes only a quick tour of the Dumpster.

That’s what Poly Recovery general manager Mike Mooney and CEO John Pelech wanted to do when they visited with Joe Thorner, general manager of Redhook’s Portsmouth brewery.

“We saw what they were putting in the dumpsters and basically what we said is: ‘What we can do is provide the same service, pick up on a weekly basis and cut the unit cost to nothing,’ ” Mooney said.

In the trash, they found PET green strapping used on pallets, low density polyethylene keg caps, and paper and plastic grain bags. There was also cardboard and foil lining from boxes of hops.

Reducing waste at Redhook also resulted in an added bonus.

“They came out with all the things that could be recycled and said that they would pick it up once a week and even pay us,” Thorner said.

Thorner said Portsmouth-based Poly Recycling now is recycling more than 10,000 pounds of Redhook’s waste material a month. In the first six months, Redhook recycled 63,143 pounds.

“We have teams that separate everything so that they can create specific recycling streams,” Thorner said.

As a result, the brewery — which is owned by Portland, Ore.-based Craft Brewers Alliance Inc. — is saving $2,910 a month on dumpster rental fees and no longer needs a compacter.

About 90 percent of the company’s waste is now reused, and employees have become more diligent about recycling. Redhook also composts its leftover food, and now works with Green Alliance, a partnership of local businesses focused on sustainability.

While both the recycler and brewer are located in Portsmouth, their effort spreads over a wider area. Poly Recovery takes the waste from Redhook and converts it to resin that is then shipped to local manufacturers.

One customer is Foss Manufacturing Co. LLC of Hampden, N.H., which uses the recycled material to make fibers that are used in shoe parts, blankets and carpeting.

Pelech started Poly Recovery six years ago. He developed a patented process to separate plastics and paper from pulp.

The company now has 16 employees and operates out of a 30,000-square-foot facility.

“Our industries are not just medical or breweries, but all types of wastes. We’re looking at every single store so they don’t fall into the dumpster,” Mooney said.


Comments

Firms invite Poly Recovery to do their Dumpster diving

By Frank Antosiewicz
Correspondent

Published: December 26, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

PolyOne launches Geon BIO PVC using soy-based materials

April 24, 2015 11:48 am ET

More than a decade of research is paying off for Battelle Memorial Institute in the form of Geon BIO PVC compounds from PolyOne Corp.    More

Image

California may require more recycled content in bottles

April 24, 2015 11:16 am ET

California lawmakers are considering a pair of bills that would bump up the required recycled content in plastic bottles for beverage companies to...    More

Image

KHS cuts packaging with direct printing on PET bottles, adhesive multi-packs

April 23, 2015 1:39 pm ET

KHS GmbH has been pouring a lot of time into solving issues related to direct printing on PET bottles, and after eight years of work, everyone...    More

Image

DuPont center in India gets LEED Certification

April 23, 2015 1:07 pm ET

DuPont Co.'s Knowledge Center in Hyderabad, India, was awarded LEED certification by the U.S. Green Building Council.    More

Image

MeadWestvaco joins the Recycling Partnership

April 23, 2015 11:19 am ET

MeadWestvaco Corp., a global packaging company with some operations in plastics, is joining the Recycling Partnership.    More

Market Reports

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Upcoming Plastics News Events

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 15, 2015 - September 17, 2015Plastics Caps & Closures - September 2015

More Events