Firms invite Poly Recovery to do their Dumpster diving

By Frank Antosiewicz
Correspondent

Published: December 26, 2012 6:00 am ET

Some of the recycled material Poly Recovery collects is converted into fibers that are used in shoe parts, blankets and carpeting. (Poly Recovery LLC photo)

Related to this story

Topics Sustainability, Materials, Recycling, Suppliers

PORTSMOUTH, N.H. (Dec. 26, 12:30 p.m. ET) — For Poly Recovery LLC, convincing companies like Redhook Brewery to turn trash to cash sometimes takes only a quick tour of the Dumpster.

That’s what Poly Recovery general manager Mike Mooney and CEO John Pelech wanted to do when they visited with Joe Thorner, general manager of Redhook’s Portsmouth brewery.

“We saw what they were putting in the dumpsters and basically what we said is: ‘What we can do is provide the same service, pick up on a weekly basis and cut the unit cost to nothing,’ ” Mooney said.

In the trash, they found PET green strapping used on pallets, low density polyethylene keg caps, and paper and plastic grain bags. There was also cardboard and foil lining from boxes of hops.

Reducing waste at Redhook also resulted in an added bonus.

“They came out with all the things that could be recycled and said that they would pick it up once a week and even pay us,” Thorner said.

Thorner said Portsmouth-based Poly Recycling now is recycling more than 10,000 pounds of Redhook’s waste material a month. In the first six months, Redhook recycled 63,143 pounds.

“We have teams that separate everything so that they can create specific recycling streams,” Thorner said.

As a result, the brewery — which is owned by Portland, Ore.-based Craft Brewers Alliance Inc. — is saving $2,910 a month on dumpster rental fees and no longer needs a compacter.

About 90 percent of the company’s waste is now reused, and employees have become more diligent about recycling. Redhook also composts its leftover food, and now works with Green Alliance, a partnership of local businesses focused on sustainability.

While both the recycler and brewer are located in Portsmouth, their effort spreads over a wider area. Poly Recovery takes the waste from Redhook and converts it to resin that is then shipped to local manufacturers.

One customer is Foss Manufacturing Co. LLC of Hampden, N.H., which uses the recycled material to make fibers that are used in shoe parts, blankets and carpeting.

Pelech started Poly Recovery six years ago. He developed a patented process to separate plastics and paper from pulp.

The company now has 16 employees and operates out of a 30,000-square-foot facility.

“Our industries are not just medical or breweries, but all types of wastes. We’re looking at every single store so they don’t fall into the dumpster,” Mooney said.


Comments

Firms invite Poly Recovery to do their Dumpster diving

By Frank Antosiewicz
Correspondent

Published: December 26, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Coca-Cola sustainability report highlights PlantBottle usage

October 1, 2014 12:47 pm ET

Coca-Cola Co. has now distributed more than 25 billion PlantBottles since their introduction five years ago.    More

Image

OptiLedge taking Ikea's pallet replacement system to the next level

October 1, 2014 11:49 am ET

OptiLedge LLC is taking Ikea's plastic alternative to the traditional wooden pallet to the next level, making and marketing them globally.    More

Image

Blow molding machinery maker opens first plant in Taiwan

October 1, 2014 1:27 pm ET

Taiwanese equipment maker Kin Precision Industry Co. Ltd. has opened a 2,000-square-meter, 25-employee factory in Taichung, Taiwan, with an eye to...    More

Image

Global Plastics Summit puts PE prices in the spotlight

October 1, 2014 3:17 pm ET

Product manufacturers may start to shift away from polyethylene because of high prices, according to two major plastics processors.    More

Image

Speaker: Many issues can affect multi-cavity molds

October 1, 2014 2:02 pm ET

There are several conditions necessary across all cavities of a multi-cavity mold to ensure that all parts are produced the same. These include identi...    More

Market Reports

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our industry analysis highlights macro industry trends and micro trends faced by companies that do business in Mexico. The report also provides key industry statistics and forecasts to anticipate future industry expansion.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events