Firms invite Poly Recovery to do their Dumpster diving

By Frank Antosiewicz
Correspondent

Published: December 26, 2012 6:00 am ET

Some of the recycled material Poly Recovery collects is converted into fibers that are used in shoe parts, blankets and carpeting. (Poly Recovery LLC photo)

Related to this story

Topics Materials, Suppliers, Sustainability, Recycling

PORTSMOUTH, N.H. (Dec. 26, 12:30 p.m. ET) — For Poly Recovery LLC, convincing companies like Redhook Brewery to turn trash to cash sometimes takes only a quick tour of the Dumpster.

That’s what Poly Recovery general manager Mike Mooney and CEO John Pelech wanted to do when they visited with Joe Thorner, general manager of Redhook’s Portsmouth brewery.

“We saw what they were putting in the dumpsters and basically what we said is: ‘What we can do is provide the same service, pick up on a weekly basis and cut the unit cost to nothing,’ ” Mooney said.

In the trash, they found PET green strapping used on pallets, low density polyethylene keg caps, and paper and plastic grain bags. There was also cardboard and foil lining from boxes of hops.

Reducing waste at Redhook also resulted in an added bonus.

“They came out with all the things that could be recycled and said that they would pick it up once a week and even pay us,” Thorner said.

Thorner said Portsmouth-based Poly Recycling now is recycling more than 10,000 pounds of Redhook’s waste material a month. In the first six months, Redhook recycled 63,143 pounds.

“We have teams that separate everything so that they can create specific recycling streams,” Thorner said.

As a result, the brewery — which is owned by Portland, Ore.-based Craft Brewers Alliance Inc. — is saving $2,910 a month on dumpster rental fees and no longer needs a compacter.

About 90 percent of the company’s waste is now reused, and employees have become more diligent about recycling. Redhook also composts its leftover food, and now works with Green Alliance, a partnership of local businesses focused on sustainability.

While both the recycler and brewer are located in Portsmouth, their effort spreads over a wider area. Poly Recovery takes the waste from Redhook and converts it to resin that is then shipped to local manufacturers.

One customer is Foss Manufacturing Co. LLC of Hampden, N.H., which uses the recycled material to make fibers that are used in shoe parts, blankets and carpeting.

Pelech started Poly Recovery six years ago. He developed a patented process to separate plastics and paper from pulp.

The company now has 16 employees and operates out of a 30,000-square-foot facility.

“Our industries are not just medical or breweries, but all types of wastes. We’re looking at every single store so they don’t fall into the dumpster,” Mooney said.


Comments

Firms invite Poly Recovery to do their Dumpster diving

By Frank Antosiewicz
Correspondent

Published: December 26, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Australian firm buys Chemical Market Resources

September 23, 2014 8:42 pm ET

In an international consulting deal, Chemical Market Resources Inc. has been acquired by TZ Minerals International Pty. Ltd. for an undisclosed price.    More

Image

Ewikon, Gammaflux form private-label partnership

September 23, 2014 2:47 pm ET

German hot runner manufacturer Ewikon GmbH is forming a private-label partnership with Gammaflux LP, Ewikon announced at a Technology Day held Sept....    More

Image

PolyOne opens new plant in India

September 23, 2014 3:11 pm ET

North American compounding leader PolyOne Corp. has opened a new plant in Pune, India.    More

Image

Study: Consumers, industry EPS recycling rates on the rise

September 23, 2014 2:22 pm ET

Recycling of post-consumer and post-commercial expanded polystyrene hit an all-time high of 34 percent in 2013, according to a new report.    More

Image

Chinese mold makers say they don't worry about reshoring trends

September 23, 2014 12:05 pm ET

Reshoring may be a hot topic in U.S. manufacturing circles, but the mid-level and small players putting in appearances at this year's AsiaMold in Guan...    More

Market Reports

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

Our special market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Economics editor, Bill Wood, forecasts market growth and industry thought leaders offer competitive insight on key issues and trends impacting PP&T processors.

Learn more

Thermoformed Packaging 2014 Market Review & Outlook – North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events