Firms invite Poly Recovery to do their Dumpster diving

By Frank Antosiewicz
Correspondent

Published: December 26, 2012 6:00 am ET

Some of the recycled material Poly Recovery collects is converted into fibers that are used in shoe parts, blankets and carpeting. (Poly Recovery LLC photo)

Related to this story

Topics Sustainability, Materials, Recycling, Suppliers

PORTSMOUTH, N.H. (Dec. 26, 12:30 p.m. ET) — For Poly Recovery LLC, convincing companies like Redhook Brewery to turn trash to cash sometimes takes only a quick tour of the Dumpster.

That’s what Poly Recovery general manager Mike Mooney and CEO John Pelech wanted to do when they visited with Joe Thorner, general manager of Redhook’s Portsmouth brewery.

“We saw what they were putting in the dumpsters and basically what we said is: ‘What we can do is provide the same service, pick up on a weekly basis and cut the unit cost to nothing,’ ” Mooney said.

In the trash, they found PET green strapping used on pallets, low density polyethylene keg caps, and paper and plastic grain bags. There was also cardboard and foil lining from boxes of hops.

Reducing waste at Redhook also resulted in an added bonus.

“They came out with all the things that could be recycled and said that they would pick it up once a week and even pay us,” Thorner said.

Thorner said Portsmouth-based Poly Recycling now is recycling more than 10,000 pounds of Redhook’s waste material a month. In the first six months, Redhook recycled 63,143 pounds.

“We have teams that separate everything so that they can create specific recycling streams,” Thorner said.

As a result, the brewery — which is owned by Portland, Ore.-based Craft Brewers Alliance Inc. — is saving $2,910 a month on dumpster rental fees and no longer needs a compacter.

About 90 percent of the company’s waste is now reused, and employees have become more diligent about recycling. Redhook also composts its leftover food, and now works with Green Alliance, a partnership of local businesses focused on sustainability.

While both the recycler and brewer are located in Portsmouth, their effort spreads over a wider area. Poly Recovery takes the waste from Redhook and converts it to resin that is then shipped to local manufacturers.

One customer is Foss Manufacturing Co. LLC of Hampden, N.H., which uses the recycled material to make fibers that are used in shoe parts, blankets and carpeting.

Pelech started Poly Recovery six years ago. He developed a patented process to separate plastics and paper from pulp.

The company now has 16 employees and operates out of a 30,000-square-foot facility.

“Our industries are not just medical or breweries, but all types of wastes. We’re looking at every single store so they don’t fall into the dumpster,” Mooney said.


Comments

Firms invite Poly Recovery to do their Dumpster diving

By Frank Antosiewicz
Correspondent

Published: December 26, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Americhem beats weather woes at start of 2014 for good fiscal year

November 26, 2014 9:45 am ET

Gains from the automotive and construction markets provided a strong fiscal 2014 for Americhem Inc.    More

Image

PE prices drop for first time in two years, PP down 5 cents

November 26, 2014 10:22 am ET

North American polyethylene buyers might want to circle November 2014 in red on their calendars — since PE prices this month have fallen for...    More

Image

SPI hopes to build on EPS recycling

November 26, 2014 6:00 am ET

Successfully recycling expanded polystyrene can be a challenge, there's no doubt about that. EPS, however, has value, is in demand and deserves to be ...    More

Image

Pan-European plastics recycling show scheduled for 2015

November 26, 2014 6:00 am ET

Europe is to get its first pan-European exhibition and conference aimed at the region's plastics recycling industry next year.    More

Image

2014 US machinery shipments up 6 percent

November 25, 2014 5:17 pm ET

Through the first nine months of 2014 U.S. shipments of primary plastics equipment — for injection molding, blow molding and extrusion — g...    More

Market Reports

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 billion plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events