Blackwell expands staff, equipment

By Frank Esposito
Senior Staff Reporter

Published: December 27, 2012 6:00 am ET

Related to this story

Topics Medical, Sustainability, Injection Molding, Film & Sheet

HOUSTON (Dec. 27, 4:20 p.m. ET) — Plastics processor Blackwell Plastics Inc. has grown by adding machinery and personnel.

Houston-based Blackwell, an injection molder and extruder, added a 520-ton Negri Bossi electric press in October. The machine is the firm’s 28th injection molding machine, but its first all-electric, President Jeff Applegate said in a Dec. 27 phone interview.

Applegate described the Negri Bossi machine as “reclaimed and almost new,” adding that it was acquired for less than $500,000. It’s Blackwell’s largest machine based on shot size and its second-largest based on tonnage, he said.

The machine will be used to make a variety of products, and its capacity already is sold out, Applegate added. Blackwell also began using Negri Bossi’s Amico-brand remote-service system in October, and added dryers and other auxiliary equipment during 2012 as well.

On the personnel side, Blackwell in 2012 hired industry veterans Carl Kilcrease and Scott Kelley. Kilcrease was brought in as the firm’s manager of molding operations. He has more than 20 years of injection molding experience, including a stint of more than 10 years with Nypro Inc. Kelley was hired as Blackwell’s director of sales and engineering and recently was promoted to vice president and named a director. He has 22 years of industry experience, most recently with injection molder Stellar Plastics Inc. in San Marcos, Texas.

Blackwell also added 12 production workers in 2012 and plans to add seven to 10 more in 2013, Applegate said. The firm currently employs 83 in 90,000 square feet of manufacturing space spread out over four buildings.

“We are using this time of uncertainty to invest in people, plant and equipment to position the company for future success,” he said in a Dec. 21 news release. “We believe that there is always going to be a need for a good regional custom injection molder and, based on this belief, we are working to make sure our team is in a position to win.”

Blackwell doesn’t release annual sales totals, but Applegate said the firm’s sales were up 14 percent in 2012 and are expected to be up 15 percent in 2013.

“We are steadily growing our customer base and have a strong pipeline of new products,” he said in the release. “I believe we are at a tipping point in our business and are experiencing the growth in revenue and profits that come from a solid, well-established team.

“Regardless of our government’s policy or economic conditions outside our control, there will always be growth opportunities.”


Comments

Blackwell expands staff, equipment

By Frank Esposito
Senior Staff Reporter

Published: December 27, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Globalization brings sizable growth, primarily in Asia

November 25, 2014 1:40 pm ET

In 1990, the year after Plastics News published our first issue, there were 33,000 injection molding machines sold worldwide. Fast forward to 2013,...    More

Image

Uni Cap to build cap molding plant in Jordan

November 25, 2014 12:57 pm ET

The Persian Gulf's largest molder of caps and closures is investing $10 million in a new factory near Amman, Jordan, as part of an effort to boost...    More

Image

Deal adds U.K. plant to DelStar

November 25, 2014 12:47 pm ET

Schweitzer-Mauduit International Inc. (SWM) is acquiring certain assets from the advanced wound management division of London-based Smith & Nephew...    More

Image

World Plastics Council takes on sustainbility for its initial priorities

November 25, 2014 9:51 am ET

The recently formed World Plastics Council (WPC) has set marine debris and post-consumer recycling and energy recover as its initial top priorities.    More

Image

Canada's Papp Plastics is eyeing big opportunities with JV in Mexico

November 24, 2014 4:11 pm ET

Canadian injection molder and turnkey solution provider Papp Plastics & Distributing Ltd. will open an $11 million to $12 million joint venture facili...    More

Market Reports

Plastics in Brazil - State of the Industry Report

This in-depth report examines the Brazilian plastics industry from a historical and geographical context. Our analysts provide insight on economic trends and forecasts, growing manufacturing sectors that utilize plastics, private investment opportunities, market environment challenges, and innovations in R&D.

Data tables and charts on producer prices, trade, plastics production and end market indicators is also included.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events