Blackwell expands staff, equipment

By Frank Esposito
Senior Staff Reporter

Published: December 27, 2012 6:00 am ET

Related to this story

Topics Medical, Sustainability, Injection Molding, Film & Sheet

HOUSTON (Dec. 27, 4:20 p.m. ET) — Plastics processor Blackwell Plastics Inc. has grown by adding machinery and personnel.

Houston-based Blackwell, an injection molder and extruder, added a 520-ton Negri Bossi electric press in October. The machine is the firm’s 28th injection molding machine, but its first all-electric, President Jeff Applegate said in a Dec. 27 phone interview.

Applegate described the Negri Bossi machine as “reclaimed and almost new,” adding that it was acquired for less than $500,000. It’s Blackwell’s largest machine based on shot size and its second-largest based on tonnage, he said.

The machine will be used to make a variety of products, and its capacity already is sold out, Applegate added. Blackwell also began using Negri Bossi’s Amico-brand remote-service system in October, and added dryers and other auxiliary equipment during 2012 as well.

On the personnel side, Blackwell in 2012 hired industry veterans Carl Kilcrease and Scott Kelley. Kilcrease was brought in as the firm’s manager of molding operations. He has more than 20 years of injection molding experience, including a stint of more than 10 years with Nypro Inc. Kelley was hired as Blackwell’s director of sales and engineering and recently was promoted to vice president and named a director. He has 22 years of industry experience, most recently with injection molder Stellar Plastics Inc. in San Marcos, Texas.

Blackwell also added 12 production workers in 2012 and plans to add seven to 10 more in 2013, Applegate said. The firm currently employs 83 in 90,000 square feet of manufacturing space spread out over four buildings.

“We are using this time of uncertainty to invest in people, plant and equipment to position the company for future success,” he said in a Dec. 21 news release. “We believe that there is always going to be a need for a good regional custom injection molder and, based on this belief, we are working to make sure our team is in a position to win.”

Blackwell doesn’t release annual sales totals, but Applegate said the firm’s sales were up 14 percent in 2012 and are expected to be up 15 percent in 2013.

“We are steadily growing our customer base and have a strong pipeline of new products,” he said in the release. “I believe we are at a tipping point in our business and are experiencing the growth in revenue and profits that come from a solid, well-established team.

“Regardless of our government’s policy or economic conditions outside our control, there will always be growth opportunities.”


Comments

Blackwell expands staff, equipment

By Frank Esposito
Senior Staff Reporter

Published: December 27, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Molder goes to auction block

October 17, 2014 12:17 pm ET

An Illinois custom injection molding operation will be auctioned off after its owner decided to close the business.    More

Image

Plastikon expanding in Kentucky

October 17, 2014 11:24 am ET

Automotive supplier Plastikon Industries Inc. plans to more than double the size of its production facility in Leitchfield, Ky.    More

Image

Corbion Purac collaboration taking bioplastics into even more uses

October 17, 2014 6:00 am ET

Corbion Purac NV's collaboration with Taiwan-headquartered compounder Supla Co. Ltd. and Taiwan electronics producer Kuender & Co. is paying...    More

Image

Metabolix closing Germany operations

October 16, 2014 2:28 pm ET

Bioplastics maker Metabolix Inc. will end business operations in Germany at the end of 2014, according to documents the company filed with the U.S....    More

Image

New Amcor, Method project taking sustainability to a platinum level

October 16, 2014 11:28 am ET

Amcor Rigid Plastics will have a bottle production operation within a factory which is aiming to be the world's first LEED platinum certified manufact...    More

Market Reports

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events