Analysts predict continued PET overcapacity, but growth for PVC

By Frank Esposito
Senior Staff Reporter

Published: December 28, 2012 6:00 am ET

Willett

Related to this story

Topics Materials, Suppliers

CHICAGO (Dec. 28, 4:55 p.m. ET) — North American PET resin growth is expected to remain low for the near future, while PVC resin growth in the region is trending upward.

This status has helped PVC exports from North America, which have more than tripled since 2007. And in 2012 a recovering U.S. economy resulted in positive domestic growth for the first time since 2004. “I think North American PVC hit bottom in 2011 and now will see sustained growth domestically,” Brien said. “Exports also should continue to grow.”

Brien added that he expects North American PVC operating rates to improve from just over 85 percent in 2012 to almost 88 percent in 2013. But operating rates among makers of PVC pipe and siding — which have been hammered by the drop in construction — are still around 50-60 percent, he said.

Those low rates could be changing as the U.S. housing market recovers. That’s important for PVC, since construction-related uses account for more than half of domestic sales.

“Global construction spending is up in both North America and the world,” Brien said. “Residential construction is picking up in North America because of low interest rates.”

That trend could lift U.S. housing starts back up to the 1.6 million level by 2017, Brien said — well above their current level of 750,000, but still shy of the 2 million mark they hit before the recession.

“The housing market is slowly beginning to rebound,” Brien said. “There’s a tremendous amount of pent-up demand to replace aging infrastructure such as sewer and water pipe. That bodes well for the [PVC] resin side.”


Comments

Analysts predict continued PET overcapacity, but growth for PVC

By Frank Esposito
Senior Staff Reporter

Published: December 28, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Polypropylene prices rise, while PE and PS fall

February 26, 2015 4:01 pm ET

North American prices for polyethylene and polystyrene resins continued to fall in February, while regional prices for polypropylene showed a...    More

Image

NFM Welding Engineers opens direct office in China

February 26, 2015 2:05 pm ET

MASSILLON, OHIO — Extrusion equipment manufacturer NFM Welding Engineers Inc. has opened a sales office in Dalian, China.    More

Image

Price and sustainability both key to success for carpet recycler

February 26, 2015 1:28 pm ET

DALLAS — A green message will get you in the door, but ultimately that sustainability message has to be backed up with quality at the right...    More

Image

3i to sell specialty chemicals company Azelis to Apax Partners

February 26, 2015 11:36 am ET

Azelis Holding SA, the specialty chemicals distributor, is being sold by its private equity owners 3i Group plc to another private investment outfit, ...    More

Image

Medical compounder adding two extrusion lines

February 25, 2015 3:49 pm ET

Compounding Solutions LLC plans to add two new co-rotating twin-screw extruders this year to raise its capacity and provide more flexibility.    More

Market Reports

Flexible Packaging Trends in North America

North America represents about 30 percent of the global consumption of flexible packaging. Annual growth in this region is forecast at 4 percent during the next 5 years.

For more insight on growth opportunities, drivers of growth and the outlook for 2015, download this report.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 billion plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Upcoming Plastics News Events

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events