Floe resurrecting giant thermoforming machine

By Michael Lauzon
Correspondent

Published: December 28, 2012 6:00 am ET

This giant thermoforming machine, made by now-defunct Advanced Ventures in Technology Inc., will begin operating again in February at Floe International. (Floe International Inc. photo)

Related to this story

Topics Thermoforming Machinery
Companies & Associations

MCGREGOR, MINN. (Dec. 28, 3 p.m. ET) — A large-machine thermoforming operation is due to start operating in February.

Floe International Inc. is building a 400,000-square-foot facility in McGregor that will house what consultants said is the largest rotary thermoformer in the world, a 10-foot-by-25-foot behemoth that has been sitting idle for several years.

“We will have several proprietary products in transportation and will try to provide solutions for large products,” said Floe International CEO Wayne Floe in a telephone interview.

Wayne Floe did not specify the cost of the project, only saying it will involve millions of dollars.

He has an extensive background in marine products, many of which could be made by the large thermoforming machine. Watercraft, floating docks and trailers are some of the items the new operation could make.

He said he has been dealing with contract thermoformers to make marine-related products at the firm’s headquarters in McGregor and in Hoyt Lake, Minn. For components not large enough to justify the large machine, Floe International will continue to rely on outside thermoformers, he said.

Wayne Floe said he has been in the marine products business for 30 years and the decision to invest in the large machine was made after he gave it a lot of thought.

“It means we can take our technologies to a new level,” he said. “We’ve been studying what to do since the 1990s.”

Floe International expects to buy high density polyethylene, ABS and capped ABS sheet to feed the machine, which has a 6-foot draw and can make parts weighing as much as 600 pounds.

Two consultants working with Floe International said the machine has been the largest in the world since it was built in 2004 by now-defunct Advanced Ventures in Technology Inc. of Gladwin, Mich.

Roger Fox of manufacturer’s representative Foxmor Group Inc. of Wheaton, Ill., and consultant Robert Browning of Isosceles Inc. of Atlanta helped advise on the project.

The machine originally was built for Better Bath Components of Waxahachie, Texas, to make components for recreational vehicles, manufactured housing and marine products, but the applications did not pan out as expected.

After Advanced Ventures in Technology went out of business, many of its employees started another machinery company, American Thermoforming Machinery LLC of West Branch, Mich.


Comments

Floe resurrecting giant thermoforming machine

By Michael Lauzon
Correspondent

Published: December 28, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

McClarin doubles in size, reach with Amtech acquisition

April 1, 2015 10:57 am ET

From Washington to Pennsylvania to Alabama, the new McClarin Plastics LLC will be twice as big and provide fiber-reinforced plastic components as...    More

Image

Light shines on plastics innovation

March 30, 2015 10:57 am ET

The Society of Plastics Engineers shone a light on the benefits of plastic at NPE with its Plastics for Life competition, with the Grand Prize going...    More

Image

Fabri-Kal to expand its sustainable packaging with new Idaho plant

March 20, 2015 2:03 pm ET

Thermoformed packaging company Fabri-Kal Corp. plans to tap into Idaho's farming community to expand its sustainable packaging program.    More

Market Reports

Trends in Resin Distribution

The growth of the North American resin distribution market is undeniable - and industry analysts are confident that growth will continue in 2015 and beyond.

This new report analyzes market trends and provides data on historical sales trends for PE (distribution and resellers), PolyOne Distribution figures, U.S. ethylene expansions based on shale gas and natural gas production by category to 2035.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 billion plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Upcoming Plastics News Events

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events