Floe resurrecting giant thermoforming machine

By Michael Lauzon
Correspondent

Published: December 28, 2012 6:00 am ET

This giant thermoforming machine, made by now-defunct Advanced Ventures in Technology Inc., will begin operating again in February at Floe International. (Floe International Inc. photo)

Related to this story

Topics Thermoforming, Machinery

MCGREGOR, MINN. (Dec. 28, 3 p.m. ET) — A large-machine thermoforming operation is due to start operating in February.

Floe International Inc. is building a 400,000-square-foot facility in McGregor that will house what consultants said is the largest rotary thermoformer in the world, a 10-foot-by-25-foot behemoth that has been sitting idle for several years.

“We will have several proprietary products in transportation and will try to provide solutions for large products,” said Floe International CEO Wayne Floe in a telephone interview.

Wayne Floe did not specify the cost of the project, only saying it will involve millions of dollars.

He has an extensive background in marine products, many of which could be made by the large thermoforming machine. Watercraft, floating docks and trailers are some of the items the new operation could make.

He said he has been dealing with contract thermoformers to make marine-related products at the firm’s headquarters in McGregor and in Hoyt Lake, Minn. For components not large enough to justify the large machine, Floe International will continue to rely on outside thermoformers, he said.

Wayne Floe said he has been in the marine products business for 30 years and the decision to invest in the large machine was made after he gave it a lot of thought.

“It means we can take our technologies to a new level,” he said. “We’ve been studying what to do since the 1990s.”

Floe International expects to buy high density polyethylene, ABS and capped ABS sheet to feed the machine, which has a 6-foot draw and can make parts weighing as much as 600 pounds.

Two consultants working with Floe International said the machine has been the largest in the world since it was built in 2004 by now-defunct Advanced Ventures in Technology Inc. of Gladwin, Mich.

Roger Fox of manufacturer’s representative Foxmor Group Inc. of Wheaton, Ill., and consultant Robert Browning of Isosceles Inc. of Atlanta helped advise on the project.

The machine originally was built for Better Bath Components of Waxahachie, Texas, to make components for recreational vehicles, manufactured housing and marine products, but the applications did not pan out as expected.

After Advanced Ventures in Technology went out of business, many of its employees started another machinery company, American Thermoforming Machinery LLC of West Branch, Mich.


Comments

Floe resurrecting giant thermoforming machine

By Michael Lauzon
Correspondent

Published: December 28, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Netstal, Electra Form team up for PET preform partnership

November 20, 2014 3:15 pm ET

The Netstal division of Krauss-Maffei Corp. is teaming up with Electra Form Industries in a partnership to offer PET preform machines and molds as a...    More

Image

High pressure RTM systems moving from Europe to Mexico

November 20, 2014 4:24 pm ET

Engel Holding GmbH's subsidiary in Mexico says it has sold the first high pressure resin transfer machine system (HP-RTM) in the Americas to a...    More

Image

Reifenhäuser revitalizes German HQ

November 17, 2014 2:39 pm ET

Troisdorf, Germany-based Reifenhäuser Group, a major manufacturer of extrusion equipment, has celebrated the last beam being placed in its...    More

Image

Moretto drying system cuts costs by reducing energy demand

November 13, 2014 3:34 pm ET

FRIEDRICHSHAFEN, GERMANY — Among a number of product innovations, ancillary equipment producer Moretto SpA, based in Massanzago,...    More

Image

Borch shakes up executive suite, eyes possible U.S. factory

November 13, 2014 5:31 pm ET

Chinese injection press manufacturer Borch Machinery Co. Ltd. has shaken up its top management team, naming a new chairman and a new CEO in a move it ...    More

Market Reports

Plastics in Brazil - State of the Industry Report

This in-depth report examines the Brazilian plastics industry from a historical and geographical context. Our analysts provide insight on economic trends and forecasts, growing manufacturing sectors that utilize plastics, private investment opportunities, market environment challenges, and innovations in R&D.

Data tables and charts on producer prices, trade, plastics production and end market indicators is also included.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events