Floe resurrecting giant thermoforming machine

By Michael Lauzon
Correspondent

Published: December 28, 2012 6:00 am ET

This giant thermoforming machine, made by now-defunct Advanced Ventures in Technology Inc., will begin operating again in February at Floe International. (Floe International Inc. photo)

Related to this story

Topics Thermoforming Machinery
Companies & Associations

MCGREGOR, MINN. (Dec. 28, 3 p.m. ET) — A large-machine thermoforming operation is due to start operating in February.

Floe International Inc. is building a 400,000-square-foot facility in McGregor that will house what consultants said is the largest rotary thermoformer in the world, a 10-foot-by-25-foot behemoth that has been sitting idle for several years.

“We will have several proprietary products in transportation and will try to provide solutions for large products,” said Floe International CEO Wayne Floe in a telephone interview.

Wayne Floe did not specify the cost of the project, only saying it will involve millions of dollars.

He has an extensive background in marine products, many of which could be made by the large thermoforming machine. Watercraft, floating docks and trailers are some of the items the new operation could make.

He said he has been dealing with contract thermoformers to make marine-related products at the firm’s headquarters in McGregor and in Hoyt Lake, Minn. For components not large enough to justify the large machine, Floe International will continue to rely on outside thermoformers, he said.

Wayne Floe said he has been in the marine products business for 30 years and the decision to invest in the large machine was made after he gave it a lot of thought.

“It means we can take our technologies to a new level,” he said. “We’ve been studying what to do since the 1990s.”

Floe International expects to buy high density polyethylene, ABS and capped ABS sheet to feed the machine, which has a 6-foot draw and can make parts weighing as much as 600 pounds.

Two consultants working with Floe International said the machine has been the largest in the world since it was built in 2004 by now-defunct Advanced Ventures in Technology Inc. of Gladwin, Mich.

Roger Fox of manufacturer’s representative Foxmor Group Inc. of Wheaton, Ill., and consultant Robert Browning of Isosceles Inc. of Atlanta helped advise on the project.

The machine originally was built for Better Bath Components of Waxahachie, Texas, to make components for recreational vehicles, manufactured housing and marine products, but the applications did not pan out as expected.

After Advanced Ventures in Technology went out of business, many of its employees started another machinery company, American Thermoforming Machinery LLC of West Branch, Mich.


Comments

Floe resurrecting giant thermoforming machine

By Michael Lauzon
Correspondent

Published: December 28, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Danish packaging firm Faerch buys UK's Anson as part of growth strategy

April 24, 2015 9:37 am ET

Denmark-based packaging company Faerch Plast A/S has acquired Ely, United Kingdom-based Anson Packaging Ltd., a move the company says “should...    More

Image

Obituary: Thermoforming pioneer, Prent founder Jack Pregont

April 21, 2015 1:54 pm ET

Thermoforming pioneer Jack Elmer Pregont died April 17 in Sarasota, Fla., at age 85.    More

Image

GN Thermoforming changes management following founder's arrest

April 15, 2015 4:47 pm ET

GN Thermoforming Equipment officials say Georg Nemeskeri has stepped away from active involvement with the company he founded 34 years ago and a...    More

Image

Japanese purchase expands global reach for Australia's bio-based Plantic

April 15, 2015 11:37 am ET

Australian bio-based barrier film developer Plantic Technologies Ltd. has been sold to a Japanese barrier film manufacturer.    More

Image

Recycled cup maker MicroGreen shuts down

April 14, 2015 6:39 pm ET

An Arlington, Wash.-based cup maker, which used recycled PET and attracted millions and millions of outside investment, has “ceased operations.&...    More

Market Reports

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Upcoming Plastics News Events

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 15, 2015 - September 17, 2015Plastics Caps & Closures - September 2015

More Events