Floe resurrecting giant thermoforming machine

By Michael Lauzon
Correspondent

Published: December 28, 2012 6:00 am ET

This giant thermoforming machine, made by now-defunct Advanced Ventures in Technology Inc., will begin operating again in February at Floe International. (Floe International Inc. photo)

Related to this story

Topics Thermoforming, Machinery

MCGREGOR, MINN. (Dec. 28, 3 p.m. ET) — A large-machine thermoforming operation is due to start operating in February.

Floe International Inc. is building a 400,000-square-foot facility in McGregor that will house what consultants said is the largest rotary thermoformer in the world, a 10-foot-by-25-foot behemoth that has been sitting idle for several years.

“We will have several proprietary products in transportation and will try to provide solutions for large products,” said Floe International CEO Wayne Floe in a telephone interview.

Wayne Floe did not specify the cost of the project, only saying it will involve millions of dollars.

He has an extensive background in marine products, many of which could be made by the large thermoforming machine. Watercraft, floating docks and trailers are some of the items the new operation could make.

He said he has been dealing with contract thermoformers to make marine-related products at the firm’s headquarters in McGregor and in Hoyt Lake, Minn. For components not large enough to justify the large machine, Floe International will continue to rely on outside thermoformers, he said.

Wayne Floe said he has been in the marine products business for 30 years and the decision to invest in the large machine was made after he gave it a lot of thought.

“It means we can take our technologies to a new level,” he said. “We’ve been studying what to do since the 1990s.”

Floe International expects to buy high density polyethylene, ABS and capped ABS sheet to feed the machine, which has a 6-foot draw and can make parts weighing as much as 600 pounds.

Two consultants working with Floe International said the machine has been the largest in the world since it was built in 2004 by now-defunct Advanced Ventures in Technology Inc. of Gladwin, Mich.

Roger Fox of manufacturer’s representative Foxmor Group Inc. of Wheaton, Ill., and consultant Robert Browning of Isosceles Inc. of Atlanta helped advise on the project.

The machine originally was built for Better Bath Components of Waxahachie, Texas, to make components for recreational vehicles, manufactured housing and marine products, but the applications did not pan out as expected.

After Advanced Ventures in Technology went out of business, many of its employees started another machinery company, American Thermoforming Machinery LLC of West Branch, Mich.


Comments

Floe resurrecting giant thermoforming machine

By Michael Lauzon
Correspondent

Published: December 28, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Blow molding machinery maker opens first plant in Taiwan

October 1, 2014 1:27 pm ET

Taiwanese equipment maker Kin Precision Industry Co. Ltd. has opened a 2,000-square-meter, 25-employee factory in Taichung, Taiwan, with an eye to...    More

Image

Audacious vandal stuns Taipei Plas

September 29, 2014 4:59 pm ET

Melodrama erupted at the traditionally tranquil Taipei Plas trade show on Sept. 28 when a mysterious intruder flung red paint at the Baumüller...    More

Image

Shini pushes into western China

September 29, 2014 4:28 pm ET

Despite intellectual-property brigands, Taiwan's Shini Plastics Technologies Inc. is zestfully pursuing the enormous Chinese market for plastics...    More

Image

Global giant Foxconn to make, sell molding machines

September 26, 2014 2:48 pm ET

For years, Taiwan's Foxconn Technology Group has been the world's largest contract manufacturer for electronics, with more than 1 million employees...    More

Image

ATI strikes gold with bowling pinsetter production

September 26, 2014 12:30 pm ET

Heavy-duty equipment used to arrange and re-set bowling pins netted three awards for Associated Thermoforming Inc. in the parts competition at the Soc...    More

Market Reports

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our industry analysis highlights macro industry trends and micro trends faced by companies that do business in Mexico. The report also provides key industry statistics and forecasts to anticipate future industry expansion.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events