Ford program makes bumper-to-bumper a good thing

By Rhoda Miel
News Editor

Published: December 28, 2012 6:00 am ET

The Ford Core Recovery Program has processed about 120 million pounds of damaged parts since it began almost 10 years ago. (Ford Motor Co. photo)

Related to this story

Topics Automotive, Recycling

DEARBORN, MICH. (Dec. 28, 11:50 a.m. ET)  — Ford Motor Co. has expanded its car-parts recycling program to bumper fascias and headlights, and in the process found ways to reuse about 62,000 bumpers and 26,000 headlights in the past two years.

“Most parts that come back to us through the [recycling] program still have a lot of life left,” said Kim Goering, manager of Ford’s remanufacturing and recycling programs, in a Dec. 27 press release updating the automaker’s recycling progress. “That makes a strong business case to do whatever we can to extend the life of those components.”

Dearborn-based Ford launched its Core Recovery Program in 2003, initially focused on large metal parts such as engine components, and valuable electronic sensors and fuel injectors. The company estimates it has kept 120 million pounds of damaged parts out of landfills since the program began.

Two years ago, it added bumpers and headlights, noting wealth of potential plastics for recycling.

A typical headlight today is a multipart assembly with expensive polycarbonate and other engineered plastics, along with reflectors, wire harnesses and the light bulbs themselves, Ford executives said.

Bumper fascias are typically 5-6 feet long and weigh 20 pounds.

“That adds up fast and it makes it pretty easy to see how much of an impact the program makes,” Goering said.

The recovery program works through Ford vehicle-repair shops, and operate much like a bottle-deposit system. Dealers pay a “core charge” on each new part they buy to replace a damaged one, but receive that money back when they turn in the old part.

Damaged parts typically are turned over to third-party companies that specialize in recycling those parts. Bumper fascias, for instance, can be reground to reuse the thermoplastic polyolefin and other thermoplastics. Other components may be repaired, cleaned and tested if they are still in working order, then sold for future use. When the part cannot be repaired or recycled, Ford oversees its disposal.

Mark Trombetta, manager of the Ford Regional Core Recovery Center Network, said that in addition to its environmental benefits, the process helps to keep damaged Ford parts out of the marketplace — unless they have passed tests. That, in turn, helps Ford’s quality image.

 “We are always considering the business case for different products, which is quite a task when you think about the sheer quantity and complexity of parts going into today’s vehicles,” Goering said.


Comments

Ford program makes bumper-to-bumper a good thing

By Rhoda Miel
News Editor

Published: December 28, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Magna expanding interiors site in Slovakia

July 29, 2014 1:47 pm ET

Magna International Inc. plans to nearly double the size of its manufacturing facility in Trnava, in western Slovakia, to accommodate new automotive...    More

Magna hiring at two Michigan locations

July 28, 2014 11:43 am ET

Magna Interior Trim Components is adding a total of 169 jobs to two of its Michigan manufacturing facilities.    More

Image

Metals and plastics company NN to buy Autocam in $300 million deal

July 25, 2014 10:07 am ET

A Tennessee metals and plastics company said it has agreed to acquire auto parts supplier Autocam Corp. in a deal valued at $300 million.    More

Image

Chinese auto suppliers growing in US

July 24, 2014 4:17 pm ET

Two China-based automotive suppliers are expanding in the U.S., according to information released by the Michigan Economic Development Corp.    More

PetStar doubles capacity at Mexico recycling facility

July 24, 2014 2:10 pm ET

Mexican recycling giant PetStar SAPI de CV, owned by the System of Coca-Cola Bottlers in Mexico, has doubled the capacity of its facility to 130 milli...    More

Market Reports

Plastics Recyclers Data Report & Directory

This exclusive MS Excel database contains all the companies from Plastics News' ranking of top North American Recyclers and Brokers by reprocessed volume and also includes a directory with materials processes, services offered and company contact information. Data is based on primary research by PN editorial staff.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events