Sales surge spelling expansion for Design Molded Plastics

Published: January 9, 2013 6:00 am ET

DMP co-owner and President Jay Honsacker emphasizes the injection molder's abilities in design, engineering and full-service tooling as selling points to customers. (Plastics News photo by Jessica Holbrook)

Related to this story

Topics Injection Molding

MACEDONIA, OHIO (Jan. 9, 3:45 p.m. ET) — Design Molded Plastics will break ground on a 20,000-square-foot expansion this spring — a fitting start to what company officials say will be their best year yet.

The custom injection molder occupies two adjacent buildings in Macedonia: a 62,000-square-foot plant and headquarters, and a 48,000-square-foot warehouse that also houses the company’s engineering offices. DMP bought the warehouse in late 2011 after running out of room for expansion at the original facility.

The warehouse was a “strategic buy,” not just for the building but also the property, co-owner and President Jay Honsaker said in an interview at DMP’s Macedonia plant.

Combined, the two properties encompass about 10 acres. DMP will add 20,000 square feet to the warehouse as well as relocate all parking to that property, freeing up land at its headquarters plant to expand manufacturing operations. The entire project will take a couple years.

In 2012, the firm added six new injection molding machines: a two-shot 500-ton hydraulic press from Wittmann Battenfeld and five Toshiba presses — two all-electric 110-tonners and three 500-ton hydraulic presses, Honsaker said. The plant now operates 33 machines, ranging from 88-950 tons of clamping force.

To support that new capacity, DMP boosted its workforce to 200 people. That move included upping the number of entry-level machine operators from 30 to 65, said Diane Hanson, co-owner and company treasurer.

DMP did more than $23 million in business in 2012, its second year of record sales, Honaker said. He expects the firm to log a 10-20 percent sales increase in 2013, he added.

As a custom thermoplastic injection molder, DMP makes parts for markets that include home and kitchen appliances, protective equipment, automotive and medical equipment.

In recent years, the company has benefited from reshoring from Asia. DMP is one of a few U.S. manufacturers that still produce parts for vacuum cleaners, said sales manager Jim George. A maker of portable heaters recently returned production to Ohio and DMP also molds parts for that firm’s products, he added.

The company has strategically aligned itself with customers in high-end markets that offer U.S.-made products and only buy U.S.-made parts, according to Honsaker. “Those customers have grown even through the weak economy and our business has grown as a result of that,” he said.

DMP has also attracted, and retained, business by offering more than injection molding. “A big part of our business growth is [from offering] our engineering capabilities upfront with our customers,” Honsaker said.

The firm began offering full-service tooling — building, repair and maintenance — several years ago. It also has a team of engineers working in product design.

“[A customer] can design just about any part they want, but it has to come out of the mold. That’s where we come in to play,” Honsaker said. DMP can collaborate with its customers to design moldable parts that meet their criteria, including aesthetic requirements, at the lowest possible price. The company makes the tooling for the part in-house or outsources it, depending on how quickly the part is needed.

Honsaker also credited the company’s commitment to quality and cleanliness.

“We’re an exception in the industry when it comes to plant cleanliness and organization and efficiency. You see that immediately when you walk into the plant. … A very common phrase is: ‘In all the plants I’ve been in, this is the cleanest,’” Honsaker said. “Everyone says that, from the ISO auditor to the postman.”

The entire workforce contributes to keeping the plant in top form. Maintenance workers on each shift are charged with keeping the plant clean, and every mold goes through a rigorous cleaning and repairing proc­ess before being used, he said.

The plant sells itself, George said. “If we can get [prospective customers] into the door and into the plant, that’s half the job done already, without even supplying them a quote.”

DMP ships in white containers — not a common color for shipping materials — because, Honsaker said, it makes the product stand out. Customers say that when they see DMP’s white boxes, they know they’re not going to have any problems with that product, he said.


Comments

Sales surge spelling expansion for Design Molded Plastics

Published: January 9, 2013 6:00 am ET

Post Your Comments


Back to story


More stories

Image

One51 adding injection molder Straight to its bin molding portfolio

July 29, 2014 10:12 am ET

Dublin-based One51 plc has had its purchase of British trash bin maker Straight plc cleared by the United Kingdom's Competition and Markets Authority.    More

Image

Columbine Plastics moving to new Colorado site

July 25, 2014 11:38 am ET

Custom injection molder Columbine Plastics Corp. plans to move from Boulder, Colo., to the Colorado Technical Center in Louisville, Colo.    More

Image

Metals and plastics company NN to buy Autocam in $300 million deal

July 25, 2014 10:07 am ET

A Tennessee metals and plastics company said it has agreed to acquire auto parts supplier Autocam Corp. in a deal valued at $300 million.    More

Image

Chinese auto suppliers growing in US

July 24, 2014 4:17 pm ET

Two China-based automotive suppliers are expanding in the U.S., according to information released by the Michigan Economic Development Corp.    More

Image

Injection molder, recycler Polyvulc USA puts itself up for sale

July 24, 2014 12:41 pm ET

Fred Farrell and Larry Lambiotte, founders of Polyvulc USA Inc. and its subsidiaries Polyvulc Tire Recycling Llc and Winnsboro Rubber Recycling LLC, a...    More

Market Reports

Plastics Recyclers Data Report & Directory

This exclusive MS Excel database contains all the companies from Plastics News' ranking of top North American Recyclers and Brokers by reprocessed volume and also includes a directory with materials processes, services offered and company contact information. Data is based on primary research by PN editorial staff.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events