Sales surge spelling expansion for Design Molded Plastics

Published: January 9, 2013 6:00 am ET

Related to this story

Topics Injection Molding

MACEDONIA, OHIO (Jan. 9, 3:45 p.m. ET) — Design Molded Plastics will break ground on a 20,000-square-foot expansion this spring — a fitting start to what company officials say will be their best year yet.

The custom injection molder occupies two adjacent buildings in Macedonia: a 62,000-square-foot plant and headquarters, and a 48,000-square-foot warehouse that also houses the company’s engineering offices. DMP bought the warehouse in late 2011 after running out of room for expansion at the original facility.

The warehouse was a “strategic buy,” not just for the building but also the property, co-owner and President Jay Honsaker said in an interview at DMP’s Macedonia plant.

Combined, the two properties encompass about 10 acres. DMP will add 20,000 square feet to the warehouse as well as relocate all parking to that property, freeing up land at its headquarters plant to expand manufacturing operations. The entire project will take a couple years.

In 2012, the firm added six new injection molding machines: a two-shot 500-ton hydraulic press from Wittmann Battenfeld and five Toshiba presses — two all-electric 110-tonners and three 500-ton hydraulic presses, Honsaker said. The plant now operates 33 machines, ranging from 88-950 tons of clamping force.

To support that new capacity, DMP boosted its workforce to 200 people. That move included upping the number of entry-level machine operators from 30 to 65, said Diane Hanson, co-owner and company treasurer.

DMP did more than $23 million in business in 2012, its second year of record sales, Honaker said. He expects the firm to log a 10-20 percent sales increase in 2013, he added.

As a custom thermoplastic injection molder, DMP makes parts for markets that include home and kitchen appliances, protective equipment, automotive and medical equipment.

In recent years, the company has benefited from reshoring from Asia. DMP is one of a few U.S. manufacturers that still produce parts for vacuum cleaners, said sales manager Jim George. A maker of portable heaters recently returned production to Ohio and DMP also molds parts for that firm’s products, he added.

The company has strategically aligned itself with customers in high-end markets that offer U.S.-made products and only buy U.S.-made parts, according to Honsaker. “Those customers have grown even through the weak economy and our business has grown as a result of that,” he said.

DMP has also attracted, and retained, business by offering more than injection molding. “A big part of our business growth is [from offering] our engineering capabilities upfront with our customers,” Honsaker said.

The firm began offering full-service tooling — building, repair and maintenance — several years ago. It also has a team of engineers working in product design.

“[A customer] can design just about any part they want, but it has to come out of the mold. That’s where we come in to play,” Honsaker said. DMP can collaborate with its customers to design moldable parts that meet their criteria, including aesthetic requirements, at the lowest possible price. The company makes the tooling for the part in-house or outsources it, depending on how quickly the part is needed.

Honsaker also credited the company’s commitment to quality and cleanliness.

“We’re an exception in the industry when it comes to plant cleanliness and organization and efficiency. You see that immediately when you walk into the plant. … A very common phrase is: ‘In all the plants I’ve been in, this is the cleanest,’” Honsaker said. “Everyone says that, from the ISO auditor to the postman.”

The entire workforce contributes to keeping the plant in top form. Maintenance workers on each shift are charged with keeping the plant clean, and every mold goes through a rigorous cleaning and repairing proc­ess before being used, he said.

The plant sells itself, George said. “If we can get [prospective customers] into the door and into the plant, that’s half the job done already, without even supplying them a quote.”

DMP ships in white containers — not a common color for shipping materials — because, Honsaker said, it makes the product stand out. Customers say that when they see DMP’s white boxes, they know they’re not going to have any problems with that product, he said.


Comments

Sales surge spelling expansion for Design Molded Plastics

Published: January 9, 2013 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Cambro investing $30.4 million in new N.C. injection molding plant

April 18, 2014 2:36 pm ET

Foodservice products manufacturer Cambro Manufacturing Co. Inc. plans to set up a satellite production and distribution operation in Mebane, N.C., to ...    More

Image

Increased orders prompt Georg Utz to add capacity, equipment in Indiana

April 18, 2014 12:20 pm ET

Plastic totes and tray orders have picked up to the point where manufacturer Georg Utz Inc. has added machines, silos and material feed systems to...    More

MGS buying N.Y. medical molding plant from Hospira

April 17, 2014 10:19 pm ET

MGS Manufacturing Group is purchasing the Buffalo, N.Y., injection molding facility and related product line of Hospira Inc., effective July 1. Terms ...    More

Image

German auto supplier Dr. Schneider opens second US plant

April 17, 2014 12:57 pm ET

Dr. Schneider Kunststoffwerke GmbH, a German supplier of plastic interior auto parts, has opened a $29 million manufacturing plant in Russell Springs,...    More

Image

Adding flavor to capture sales

April 16, 2014 4:03 pm ET

Water bottles increasingly are designed and molded with filters and infusers to hold fruit, vegetables or herbs to give water a different taste.    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report provides analysis and discussions of economic and political conditions, market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as strategies being implemented by thermoformed packaging companies. In addition, there are reviews of 25 leading thermoformers in the packaging segment, assessing their growth initiatives and performance metrics over 10 years.

Learn more

Automotive Market Review and Outlook 2014 The Americas

This 75-page report features in-depth analysis of the automotive industry for the Americas. It includes discussions of market trends, legislative/regulatory activity impacting production and threats as well as design strategies being implemented by the major automakers. Detailed charts and data tables outline North American automotive production over the last five years.

Learn more

Plastics Building & Construction Market Review and Outlook 2014 with MS Excel chart data

This report provides in-depth analysis of the plastic building and construction market for North America, including discussions of trends, opportunities, threats and the latest developments in construction trends that impact plastics processors.

Learn more

Upcoming Plastics News Events

May 6, 2014 - May 8, 2014Plastics in Medical Devices 2014

May 12, 2014 - May 12, 2014Plastics News Brazil Pharma Summit

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 3, 2015 - February 7, 2015Plastics News Executive Forum 2015

More Events