Screws get UMass Lowell spotlight

By Bill Bregar
Senior Staff Reporter

Published: January 10, 2013 6:00 am ET

A display of the history of extrusion screws features eight scale-model screws from Glycon Corp. The exhibit is shown at the UMass Lowell’s new Emerging Technologies and Innovation Center. (Edwin Aquirre photo)

Related to this story

Topics Molds/Tooling

LOWELL, MASS. (Jan. 10, 4:10 p.m. ET) — Using old line drawings, history books and patents, employees at Glycon Corp. built eight scale-model screws for a display showing the history of extrusion screws, at the University of Massachusetts at Lowell’s new Emerging Technologies and Innovation Center.

Glycon President Jeffrey Kuhman said the project heightened his interest in plastics history. Glycon, in Tecumseh, Mich., built the eight miniature screws. Bob Malloy, chairman of UMass Lowell’s Plastics Engineering, said the school built the display case and the completed exhibit, housed in the lobby of the new building in Lowell.

“We can’t thank Jeff enough for doing this,” Malloy said.

All eight screws are 2 inches in diameter, and built to the exact scale as the originals, with accurate length-to-diameter ratios, depth of channels and other features. “We made new drawings. Each one is a scale drawing,” Kuhman said.

Screw designer Tim Womer checked the designs and helped with the historical research.

The display includes an explanation of each screw. The first extrusion screws for the rubber extrusion industry, in the late 1800s, were short. When thermoplastics came out in the 1930s, engineers adopted longer versions of the rubber screw, with a higher L:D diameter, to allow the materials to melt.

In the middle of the research, Kuhman came across an exciting historical find. While making a sales call at Kerite Co. in Seymour, Conn., he commented on a photograph of an extruder from 1865, shown in a display in the lobby. “And he said, ‘Would you like to see it?’” Kuhman recalled.

Kerite still had the extruder in storage. Used to make telegraph cable, the extruder was driven by a belts and pulleys powered by a water wheel on the nearby Naugatuck River. Malloy said the barrel was heated by steam.

Kerite has loaned the extruder to UMass Lowell, which plans to display it. Malloy said it will be restored to show the water-power drive apparatus — appropriate, since water powered Lowell’s textile mills.

Over the years, extrusion screws became longer and more complex. The display at UMass Lowell includes the first metering screws, vented screws, barrier screws, and the Maddock Mixer.

Malloy is a history buff. The Emerging Technologies and Innovation Center also is the new home of the Plastics Hall of Fame.

Malloy said he hopes Glycon will be a role model, showing that plastics companies can help document and preserve the history of plastics.

“This is a very artistic display, as well. It’s very aesthetically pleasing, even if you know nothing about extrusion,” he said. “For me, history is extremely important. We learn from the past to see how people developed.”

The first exhibit covers only extrusion screws. Malloy wants to put together a display showing the history of screws for injection molding.


Comments

Screws get UMass Lowell spotlight

By Bill Bregar
Senior Staff Reporter

Published: January 10, 2013 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Quick-Start manifolds designed to complement Rheo-Pro hot runners.

December 17, 2014 6:00 am ET

MHS Mold Hotrunner Solutions of Georgetown, Ontario, has introduced the pre-engineered Quick-Start line of hot runner manifolds, designed to...    More

Mold maker I. Thibault plans to invest more capital in Mexico

December 16, 2014 1:03 pm ET

Canadian mold maker I. Thibault Inc. plans to invest more capital in its wholly owned Mexican subsidiary, which it started operating in the summer.    More

Image

Indian mold maker Vasantha sees 'great potential' in Mexico

December 16, 2014 12:52 pm ET

Indian mold maker Vasantha Tool Crafts Pvt. Ltd. has appointed its first sales representative in Mexico, 15-year plastics industry professional Eric...    More

Image

Plastikos, Micro Mold working with local high school

December 15, 2014 6:00 am ET

The companies donated a 60-ton Demag injection press to the school, and Micro Mold’s general manager has worked with the high school's tool...    More

Market Reports

Flexible Packaging Trends in North America

Our latest RESEARCH report examines trends in FLEXIBLE PACKAGING impacting the North American market including a review of economic conditions, key drivers of growth, materials pricing, M&A activity, sustainability challenges and the outlook for 2015.

Learn more

Plastics in Brazil - State of the Industry Report

This in-depth report examines the Brazilian plastics industry from a historical and geographical context. Our analysts provide insight on economic trends and forecasts, growing manufacturing sectors that utilize plastics, private investment opportunities, market environment challenges, and innovations in R&D.

Data tables and charts on producer prices, trade, plastics production and end market indicators is also included.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events