Screws get UMass Lowell spotlight

By Bill Bregar
Senior Staff Reporter

Published: January 10, 2013 6:00 am ET

A display of the history of extrusion screws features eight scale-model screws from Glycon Corp. The exhibit is shown at the UMass Lowell’s new Emerging Technologies and Innovation Center. (Edwin Aquirre photo)

Related to this story

Topics Molds/Tooling

LOWELL, MASS. (Jan. 10, 4:10 p.m. ET) — Using old line drawings, history books and patents, employees at Glycon Corp. built eight scale-model screws for a display showing the history of extrusion screws, at the University of Massachusetts at Lowell’s new Emerging Technologies and Innovation Center.

Glycon President Jeffrey Kuhman said the project heightened his interest in plastics history. Glycon, in Tecumseh, Mich., built the eight miniature screws. Bob Malloy, chairman of UMass Lowell’s Plastics Engineering, said the school built the display case and the completed exhibit, housed in the lobby of the new building in Lowell.

“We can’t thank Jeff enough for doing this,” Malloy said.

All eight screws are 2 inches in diameter, and built to the exact scale as the originals, with accurate length-to-diameter ratios, depth of channels and other features. “We made new drawings. Each one is a scale drawing,” Kuhman said.

Screw designer Tim Womer checked the designs and helped with the historical research.

The display includes an explanation of each screw. The first extrusion screws for the rubber extrusion industry, in the late 1800s, were short. When thermoplastics came out in the 1930s, engineers adopted longer versions of the rubber screw, with a higher L:D diameter, to allow the materials to melt.

In the middle of the research, Kuhman came across an exciting historical find. While making a sales call at Kerite Co. in Seymour, Conn., he commented on a photograph of an extruder from 1865, shown in a display in the lobby. “And he said, ‘Would you like to see it?’” Kuhman recalled.

Kerite still had the extruder in storage. Used to make telegraph cable, the extruder was driven by a belts and pulleys powered by a water wheel on the nearby Naugatuck River. Malloy said the barrel was heated by steam.

Kerite has loaned the extruder to UMass Lowell, which plans to display it. Malloy said it will be restored to show the water-power drive apparatus — appropriate, since water powered Lowell’s textile mills.

Over the years, extrusion screws became longer and more complex. The display at UMass Lowell includes the first metering screws, vented screws, barrier screws, and the Maddock Mixer.

Malloy is a history buff. The Emerging Technologies and Innovation Center also is the new home of the Plastics Hall of Fame.

Malloy said he hopes Glycon will be a role model, showing that plastics companies can help document and preserve the history of plastics.

“This is a very artistic display, as well. It’s very aesthetically pleasing, even if you know nothing about extrusion,” he said. “For me, history is extremely important. We learn from the past to see how people developed.”

The first exhibit covers only extrusion screws. Malloy wants to put together a display showing the history of screws for injection molding.


Comments

Screws get UMass Lowell spotlight

By Bill Bregar
Senior Staff Reporter

Published: January 10, 2013 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Bud Frye may be retiring, but his molds and products continue

September 12, 2014 1:11 pm ET

After 35 years in the plastics industry, Bud Frye thinks it is time for someone else to sell his food storage and housewares products. That's why...    More

Image

Acquisition gives Sunningdale an injection molding footprint in India

September 3, 2014 10:29 pm ET

SINGAPORE — Injection molder and toolmaker Sunningdale Tech Ltd. on Sept. 3 announced plans to buy First Engineering Ltd., a manufacturer of...    More

Image

Processors reach out to design community

September 3, 2014 1:30 pm ET

A conference for industrial designers is starting to attract more plastics processors looking for a better connection with the design community.    More

Image

Wisconsin mold maker opens technology center

September 3, 2014 4:18 pm ET

Dynamic Tool & Design Inc. of Menomonee Falls, Wis., has completed a new technology center to provide additional space for in-house sampling and...    More

Market Reports

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events