Screws get UMass Lowell spotlight

By Bill Bregar
Senior Staff Reporter

Published: January 10, 2013 6:00 am ET

A display of the history of extrusion screws features eight scale-model screws from Glycon Corp. The exhibit is shown at the UMass Lowell’s new Emerging Technologies and Innovation Center. (Edwin Aquirre photo)

Related to this story

Topics Molds/Tooling

LOWELL, MASS. (Jan. 10, 4:10 p.m. ET) — Using old line drawings, history books and patents, employees at Glycon Corp. built eight scale-model screws for a display showing the history of extrusion screws, at the University of Massachusetts at Lowell’s new Emerging Technologies and Innovation Center.

Glycon President Jeffrey Kuhman said the project heightened his interest in plastics history. Glycon, in Tecumseh, Mich., built the eight miniature screws. Bob Malloy, chairman of UMass Lowell’s Plastics Engineering, said the school built the display case and the completed exhibit, housed in the lobby of the new building in Lowell.

“We can’t thank Jeff enough for doing this,” Malloy said.

All eight screws are 2 inches in diameter, and built to the exact scale as the originals, with accurate length-to-diameter ratios, depth of channels and other features. “We made new drawings. Each one is a scale drawing,” Kuhman said.

Screw designer Tim Womer checked the designs and helped with the historical research.

The display includes an explanation of each screw. The first extrusion screws for the rubber extrusion industry, in the late 1800s, were short. When thermoplastics came out in the 1930s, engineers adopted longer versions of the rubber screw, with a higher L:D diameter, to allow the materials to melt.

In the middle of the research, Kuhman came across an exciting historical find. While making a sales call at Kerite Co. in Seymour, Conn., he commented on a photograph of an extruder from 1865, shown in a display in the lobby. “And he said, ‘Would you like to see it?’” Kuhman recalled.

Kerite still had the extruder in storage. Used to make telegraph cable, the extruder was driven by a belts and pulleys powered by a water wheel on the nearby Naugatuck River. Malloy said the barrel was heated by steam.

Kerite has loaned the extruder to UMass Lowell, which plans to display it. Malloy said it will be restored to show the water-power drive apparatus — appropriate, since water powered Lowell’s textile mills.

Over the years, extrusion screws became longer and more complex. The display at UMass Lowell includes the first metering screws, vented screws, barrier screws, and the Maddock Mixer.

Malloy is a history buff. The Emerging Technologies and Innovation Center also is the new home of the Plastics Hall of Fame.

Malloy said he hopes Glycon will be a role model, showing that plastics companies can help document and preserve the history of plastics.

“This is a very artistic display, as well. It’s very aesthetically pleasing, even if you know nothing about extrusion,” he said. “For me, history is extremely important. We learn from the past to see how people developed.”

The first exhibit covers only extrusion screws. Malloy wants to put together a display showing the history of screws for injection molding.


Comments

Screws get UMass Lowell spotlight

By Bill Bregar
Senior Staff Reporter

Published: January 10, 2013 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Ewikon, Gammaflux form private-label partnership

September 23, 2014 2:47 pm ET

German hot runner manufacturer Ewikon GmbH is forming a private-label partnership with Gammaflux LP, Ewikon announced at a Technology Day held Sept....    More

Image

Chinese mold makers say they don't worry about reshoring trends

September 23, 2014 12:05 pm ET

Reshoring may be a hot topic in U.S. manufacturing circles, but the mid-level and small players putting in appearances at this year's AsiaMold in...    More

Image

Hong Kong's TK eyes expansion, may buy Nypro Tool operation

September 19, 2014 2:49 pm ET

Hong Kong-based mold maker and plastics processor TK Group (Holdings) Ltd. said it's reached a tentative agreement to buy a tooling factory in...    More

Market Reports

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our industry analysis highlights macro industry trends and micro trends faced by companies that do business in Mexico. The report also provides key industry statistics and forecasts to anticipate future industry expansion.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events