KraussMaffei hails technology

By Bill Bregar
Senior Staff Reporter

Published: January 11, 2013 6:00 am ET

A two-component CX machine turns out a small LED reading light, complete with molded-in electronics. (Plastics News photo by Bill Bregar)

Related to this story

Topics Machinery

FRIEDRICHSHAFEN, GERMANY (Jan. 11, 3:50 p.m. ET) — When it comes to the debate about which drive technology is better, electric or hydraulic, the answer is clear to KraussMaffei Group’s technology vice president, Karlheinz Bourdon.

Hybrid designs, which combine features of both technologies, will win out, Bourdon said.

“This is the concept of the future, in my opinion,” he said.

The Munich-based machinery maker introduced a new, larger-tonnage model to its Netstal Elion hybrid-drive series, the Elion 3200, at the Fakuma trade show in Friedrichshafen.

But the latest addition to KraussMaffei’s lineup of injection molding machines is the GX dual-platen hydraulic press.

Frank Peters, vice president of sales, said the company saw large growth rates in sales of injection molding machinery for its fiscal year ended Sept. 30.

At Fakuma, KraussMaffei showed a new GX 400-3000 press molding a glass-reinforced poly­propylene center console tray for a car. The press was equipped with the MuCell microcellular foaming system, with a step-cooling system for the mold to improve the surface quality.

“This is really a great application that also goes into the direction of zero defects,” Peters said at Fakuma, held Oct. 16-20. MuCell also reduces the weight of the part.

KM put the Elion 3200 to work at the show molding thin-wall PP lids for cream cheese on a four-by-four stack mold, in a 3.4-second cycle. The automated, in-mold-labeling system placed the labels, pulled lids out of the mold and stacked them — 8,230 lids an hour.

A two-component CX machine turned out a small reading light, complete with molded-in electronics.

The LED reading lamp emerged fully functional from the production cell.

The CX 160-380 press was equipped with a second, bolt-on injection unit, a Krallmann metal injection unit and a rotary table. The cell combined insert molding, two-component injection molding and metal alloying in the mold. The metal was processed using compression molding. First, one half of the light was molded from polycarbonate. The metal was injected in a second step. Finally, PC was overmolded to create the finished light.

Fakuma was held just four weeks after Toronto-based Onex Corp. agreed to acquire KraussMaffei from then-owner Madison Capital Partners. At the time, KM executives were tight-lipped about the deal, which was finalized in late 2012.

KraussMaffei was one of about 1,700 companies that had exhibitions at the German trade show. That compares with 1,670 in 2011, according to the fair’s organizer, P.E. Schall GmbH & Co. KG of Frickenhausen, Germany.

The number of visitors to the Fakuma plastics trade fair in Germany dipped 1.5 percent this year, to 44,176 people, compared with 2011, according to Schall. Nearly a third came from outside Germany.

The next Fakuma will be held Oct. 14-18, 2014, in Friedrich­shafen.


Comments

KraussMaffei hails technology

By Bill Bregar
Senior Staff Reporter

Published: January 11, 2013 6:00 am ET

Post Your Comments


Back to story


More stories

Image

ATS goes global with acquisition of M+W Process Automation

September 10, 2014 2:49 pm ET

ATS Automation Tooling Systems Inc., a maker of factory automation systems in Cambridge, Ontario, has agreed to buy a German company M+W Process...    More

Image

Orenda says new pulverizer improves efficiency through cooling

September 10, 2014 1:41 pm ET

Orenda Automation Technologies Inc. will unveil a new pulverizer with new cooling technology at the Rotoplas conference for rotational molders, Oct....    More

Image

Material handing systems maker expanding Kentucky operations

September 9, 2014 1:47 pm ET

Intelligrated Inc., which makes material conveying and palletizing equipment for warehousing and distribution, and manufacturing, is expanding its...    More

Image

W. Amsler Equipment adds CNC capability

September 8, 2014 1:40 pm ET

RICHMOND HILL, ONTARIO — W. Amsler Equipment Inc. has added its first computer numerically controlled milling machine — a key investment...    More

Image

Auxiliary maker Piovan to start assembly operation in India

September 8, 2014 2:24 pm ET

MUMBAI — Italian auxiliary equipment manufacturer Piovan SpA is eying the growing auxiliary market in India, and now plans to start assembling s...    More

Market Reports

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events