Peninsula Plastics expanding at Ontario site

By Michael Lauzon
Correspondent

Published: January 11, 2013 6:00 am ET

Related to this story

Topics Consumer Products, Injection Molding

FORT ERIE, ONTARIO (Jan. 11, 2:30 p.m. ET) — Injection molder Peninsula Plastics Ltd. overcame bureaucratic delays and is constructing an expansion of its operation in Fort Erie, Ontario.

“We had a lot of issues with the conservation authority because a flood plain is close to our property,” said Peninsula President Craig Bolton by phone.

Another problem was Peninsula’s desire to build a 30-foot-high addition to its 20-foot-high plant. Building codes would have require costly reinforcement for the combined structure.

Instead, Peninsula opted to build a 25,000-square-foot building next to its 35,000-square-foot one and connect them.

“There was a lot of discussion about the rules that indicate what is an expansion vs. a different building,” Bolton said.

Bolton, Peninsula’s owner, said the firm intends to finish the new building in March. It has bought two injection presses and plans to buy two more for the expansion. One of the new ones will exceed 1,000 tons of clamping force — currently the biggest size among Peninsula’s 27 presses. Bolton did not reveal the cost of the expansion.

Peninsula is a custom molder for diverse industries and also does proprietary products for insect control, and makes edge protectors, spools and eyewear protection. It recently began making curbside recycling bins and expects that business to grow so much that it has set up a separate division for it.

Fort Erie Mayor Doug Martin was one of the municipal officials who convinced regional officials that Peninsula’s plan should not be held back by red tape.


Comments

Peninsula Plastics expanding at Ontario site

By Michael Lauzon
Correspondent

Published: January 11, 2013 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Netstal, Electra Form team up for PET preform partnership

November 20, 2014 3:15 pm ET

The Netstal division of Krauss-Maffei Corp. is teaming up with Electra Form Industries in a partnership to offer PET preform machines and molds as a...    More

Image

Thomson Plastics opens N.C. plant

November 20, 2014 3:12 pm ET

Custom injection molder Thomson Plastics Inc. has opened a new manufacturing facility in Lexington, N.C.    More

Image

Molder Carclo expands in China, chasing medical growth

November 19, 2014 3:44 pm ET

U.K.-based injection molder Carclo plc is “significantly” expanding its Chinese medical manufacturing capacity with a new factory, as the ...    More

Deimling/Jeliho expanding molding, mold making operations

November 19, 2014 3:18 pm ET

Deimling/Jeliho Plastics Inc., a custom thermoplastics injection molder and contract manufacturer located in Amelia, Ohio, is expanding its molding...    More

Image

Cy Plastics invests in machinery, space

November 19, 2014 2:17 pm ET

Seeking a more efficient configuration, custom molder Cy Plastics Inc. invested over $500,000 in the past year, adding more machinery including a 350-...    More

Market Reports

Plastics in Brazil - State of the Industry Report

This in-depth report examines the Brazilian plastics industry from a historical and geographical context. Our analysts provide insight on economic trends and forecasts, growing manufacturing sectors that utilize plastics, private investment opportunities, market environment challenges, and innovations in R&D.

Data tables and charts on producer prices, trade, plastics production and end market indicators is also included.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events