Westlake Chemical launches ethylene expansion

By Frank Esposito
Senior Staff Reporter

Published: January 11, 2013 6:00 am ET

Related to this story

Topics Materials Suppliers
Companies & Associations

HOUSTON (Jan. 11, 10:30 a.m. ET) — Westlake Chemical Corp. has launched work on a project that will add 230 million pounds of annual capacity for plastic feedstock ethylene at its plant in Lake Charles, La.

The 60-day project will include a planned maintenance turnaround that will take the unit offline, officials with Houston-based Westlake said in a Jan. 10 news release.

Westlake first announced the Lake Charles expansion in April 2011. An expansion of a second ethylene cracker at the site is scheduled by the end of 2014. President and CEO Albert Chao said at the time that new technical developments in the natural gas industry “make expansion in North America attractive.”

Natural gas can be used as a feedstock to make ethane, which is then converted into ethylene, which is a primary feedstock for polyethylene, PVC and other plastic resins. Newfound supplies of natural gas are being developed throughout North America.

Westlake also is planning to add ethylene and PVC resin capacity at its plant in Calvert City, Ky. A project announced for that site in October would add 180 million pounds of annual ethylene capacity and almost 200 million pounds of annual PVC capacity. The Calvert City expansion is expected to cost between $210 million and $240 million. No cost estimate for the Lake Charles expansion was included in the Jan. 10 release.

Several other North American plastics and chemicals makers – including Dow Chemical Co., Nova Chemical Corp. and Shell Chemical Co. - also are adding capacity to take advantage of low-priced natural gas.

Westlake’s portfolio of plastics and chemicals includes PVC, low density polyethylene, ethylene, vinyl chloride monomer and caustic soda, as well as PVC pipe and related products through its North American Pipe unit.

Through the first nine months of 2012, Westlake’s sales basically were flat at just under $2.8 billion, but its nine-month profit jumped 25 percent to just over $290 million when compared to the year-ago period.

Westlake also has enjoyed a good run on Wall Street recently. Its per-share stock price was around $50 in mid-2012 but was just under $86 in late trading Jan. 10.


Comments

Westlake Chemical launches ethylene expansion

By Frank Esposito
Senior Staff Reporter

Published: January 11, 2013 6:00 am ET

Post Your Comments


Back to story


More stories

Image

PolyOne launches Geon BIO PVC using soy-based materials

April 24, 2015 11:48 am ET

More than a decade of research is paying off for Battelle Memorial Institute in the form of Geon BIO PVC compounds from PolyOne Corp.    More

Image

Study suggests infants at lower risk from BPA exposure than expected

April 23, 2015 4:58 pm ET

A new study shows that newborn babies may have less risk from bisphenol A exposure than originally thought.    More

Image

Braskem and Odebrecht reconsidering West Virginia plastics project

April 23, 2015 2:54 pm ET

Brazilian firms Braskem and Odebrecht have confirmed that they are re-evaluating Project Ascent, the major plastics and petrochemicals project they...    More

Image

DuPont center in India gets LEED Certification

April 23, 2015 1:07 pm ET

DuPont Co.'s Knowledge Center in Hyderabad, India, was awarded LEED certification by the U.S. Green Building Council.    More

Image

SiVance opens new R&D lab

April 23, 2015 12:07 pm ET

Milliken & Co. unit SiVance LLC has opened a new research and development lab for silicone and silane technologies in Gainesville, Fla.    More

Market Reports

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Woodís economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Upcoming Plastics News Events

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 15, 2015 - September 17, 2015Plastics Caps & Closures - September 2015

More Events