Mileage-boosting tech on display at auto show

Dustin Walsh

Published: January 14, 2013 6:00 am ET

Related to this story

Topics Automotive Sustainability Public Policy
Companies & Associations

DETROIT (Jan. 14, 11 a.m. ET) — Cars will do what cars do at the North American International Auto Show — draw crowds and cameras.

But at several exhibits, rapid advancements in new fuel-saving products will have supplier executives and politicians using the Detroit event as a showcase for new technology and a platform to talk about the future.

While automotive infotainment was the focus at last week’s Consumer Electronics Show in Las Vegas, fuel economy technology will shine at this week’s NAIAS media and industry days at Cobo Center.

Suppliers such as Denso International America Inc. and Johnson Controls Inc. are displaying emerging fuel-saving technology at this year’s show.

Doug Patton, senior vice president of Denso International’s engineering division, said suppliers are moving toward complete systems to highlight technology, which makes them more visible than individual products.

“There’s always been a lot of technology at the auto show, but it’s been buried in the car and you didn’t see it,” Patton said. “What you’re seeing now is a system approach where we bring technologies together and look at them as a whole for the best value.”

The challenge, experts say, is how to unite these technology advancements with sales strategies for OEMs.

David Cole, chairman of nonprofit research group Auto Harvest and chairman emeritus of the Center for Automotive Research in Ann Arbor, Mich., said the increase in fuel-savings technology is a prime example of an uncertain industry.

Bottom line: The added costs of these technologies, while promoted and touted at NAIAS, may not equate to consumer adoption — at least not yet.

“We’re really pushing the laws of the thermodynamics of engine performance, but at what cost?” Cole said. “This is really expensive stuff, and nobody has the right answer to the best benefit, so everyone is kind of out there working on a lot of things.”

The government push for fuel economy is pitting increased technology against consumer pocketbooks. CAR estimates a $2,000 increased vehicle cost for a 20 percent improvement in fuel economy.

“Is that enough?” Cole said. “It’s a very confusing period for the industry.”

Government-regulated CAFE standards require manufacturers to meet a 54.5 mpg average across their fleets by 2025.

Automakers and suppliers alike continue to push these technologies and push further into vehicle electrification to appease government demands, despite ho-hum sales.

The Detroit show is expected to host various federal officials from EPA and other agencies.

Among the green cars being highlighted at the Detroit show, General Motors Co. will unveil its Cadillac ELR Luxury Electric Hybrid on Tuesday morning, Via Motors will showcase battery-electric cars and BMW will debut its ActiveHybrid3.

Experts say that for consumers, range anxiety remains the biggest stumbling block for EV adoption. The Chevy Volt, for example, achieves roughly 40 miles on its electric battery before a traditional gas-powered motor steps in.

In a KPMG LLP study released last week, 87 percent of automotive executives said EVs won’t match the range of gas-powered vehicles for at least another five years.

“Clearly, they don’t see the numbers of these vehicles increasing,” said Betsy Meter, partner at KPMG in Detroit and its automotive audit leader. “We all kept expecting these numbers to significantly increase, but executives continue to see them at a low level, despite investment.”

U.S. EV sales totaled 52,835 in 2012, according to the Electric Drive Transportation Association. The grand total of hybrids, plug-in hybrids and battery electric vehicles sold last year in the U.S. totaled 487,480, which represents 3.4 percent of the 14.5 million cars sold last year.

That’s better than the 2.2 percent of total sales in 2011. And the market for EVs is expanding alongside the growing U.S. auto market — which is expected to eclipse 15 million units this year.


Comments

Mileage-boosting tech on display at auto show

Dustin Walsh

Published: January 14, 2013 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Haitian builds system for Renault's new China auto assembly plant

April 24, 2015 11:10 am ET

A late-comer to the world's largest auto market, French carmaker Renault SA is currently building its first factory in China.    More

Image

Eriks NV buys two US polymer companies

April 24, 2015 10:38 am ET

Dutch company Eriks NV is expanding its reach in the North American plastics sector with two acquisitions: Dallas-based Seals and Packings Inc. and...    More

Image

Jeco adds Ferry rotational molder to handle increase in business

April 23, 2015 12:27 pm ET

Jeco Plastics Products LLC is ramping up for more work, adding a new Ferry 2600 rotational molder that will provide more capabilities.    More

Image

Engel, VW working on joint research into high volume composites in auto

April 23, 2015 9:40 am ET

Engel, the Austria-based manufacturer of injection molding machines, is building one of its largest machines for a research center looking into...    More

Image

Federal-Mogul building auto wiper blade plant in Romania

April 22, 2015 12:28 pm ET

U.S. car parts maker Federal-Mogul Holdings Corp. has unveiled plans to establish a new production facility in Ploiesti, Romania, reports local news m...    More

Market Reports

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Upcoming Plastics News Events

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 15, 2015 - September 17, 2015Plastics Caps & Closures - September 2015

More Events