Philpott Rubber goes after shale drilling market

Caitlin Cook

Published: January 15, 2013 6:00 am ET

Related to this story

Topics Injection Molding
Companies & Associations

BRUNSWICK, OHIO (Jan. 15, 11:30 a.m. ET) — Shortly after helping found Corrpro Cos. Inc. in Medina, Ohio, Mike Baach was transferred to Texas in 1979. He was assigned to an office just outside of Houston, where he learned the energy business and its players on Corrpro’s behalf.

Little did he know then that the experience would be a big asset more than 30 years later, right back where he started.

Corrpro’s forte was and still is preventing corrosion in underground pipelines. Baach moved back to Ohio in 1986 to assist the company in going public, and stuck with the firm for nearly 20 more years.

He learned along the way as Corrpro became a world leader in preventing not only pipelines, but refineries, storage facilities and other important infrastructure, from succumbing to deterioration.

He retired from Corrpro in 2005. A year later Baach took his now-valuable experience to Philpott Rubber Co., where he became CEO in 2009.

Oil and gas had not been a major growth market for Brunswick-based Philpott. For 123 years, it had been molding parts and supplies from rubber, plastic and specialty polymers, largely for industrial customers. Its products were things like conveyor belts and seals used in foundries or other heavy industries. It even made seals for toilets.

Like just about any mid-sized manufacturer in Ohio, Philpott always was on the lookout for new business — but new foundries and other big industrial prospects haven’t been exactly popping up like daisies on the Ohio landscape in recent years.

Fortunately, Baach’s familiarity with the energy sector from his days with Corrpro is helping Philpott Energy exploit opportunities in the Marcellus and Utica shale of Ohio and Pennsylvania.

“Energy hasn’t been a huge driver of industrial business for a while and when this started over with the Marcellus Shale activities, finds and developments, it came to mind to us that we better find a way to participate in this,” Baach said.

The company’s products already were performing well in the harsh environment of foundries, tire factories and other heavy industries, so Baach believed Philpott could make products tough enough to work on a drilling rig.

Philpott’s strategic plan called for entry into the energy market with new products, focused on the shale gas basins in West Virginia, Ohio, Pennsylvania and New York.

The company already made gaskets and other related items for the oil and gas industry, but Baach wanted Philpott to become a solutions provider rather than simply a manufacturer of generic parts.

In an eight-month period between 2010 and 2011, Philpott executives started looking toward the energy industry and their customers in it to determine where companies were experiencing problems.

The idea was to develop both products and services to meet customers’ challenges or find a third party addressing customer needs, such as a supplier or oil field service provider, and work with that firm.

Philpott learned, among other things, that a single fluid combining the properties of a lubricant and a viscosifier — in other words, one with the right amount of both thick and slippery properties — would help during the well completion process.

During their research, Philpott execs discovered CoilChem, a New Castle, Okla.-based company founded in 2009. CoilChem’s product is polymer-based and provided a natural alignment with Philpott’s expertise and strategies — and most importantly, an answer to the needs of new customers drilling for shale gas.

CoilChem developed specific formulas for specific drilling applications and also set out to minimize the amount of chemicals needed for the drilling and completion of each well. It also made them biodegradable.

CoilChem has four products that are injected into drilling wells during the completion phase to help reduce pipe-on-pipe friction and pump pressure, while creating varying viscosity levels. Philpott is its partner and sells and services the products for drillers and their suppliers in the Utica and Marcellus.

Both companies say they are benefiting from the partnership and sales are growing.

Philpott does not disclose its net income, but Baach said it doubled its revenues since 2009 and should book about $25 million in sales this year. Not coincidentally, perhaps, 2009 was the same year Baach brought his oil and gas experience to the helm and also just about time that drilling began heating up in Pennsylvania.

The company’s new Energy division, formed in 2011 to focus on the shale gas industry, already represents about 13 percent of Philpott’s total business.

For a full version of this story, see www.crainscleveland.com.


Comments

Philpott Rubber goes after shale drilling market

Caitlin Cook

Published: January 15, 2013 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Mucell adds polypropylene parts to its potential resin applications

March 30, 2015 11:59 am ET

Structural polypropylene applications are now candidates for the use of Mucell microcellular foaming technology.    More

Image

Light shines on plastics innovation

March 30, 2015 10:57 am ET

The Society of Plastics Engineers shone a light on the benefits of plastic at NPE with its Plastics for Life competition, with the Grand Prize going...    More

Image

Haitian aims to revolutionize US molders' purchase process

March 27, 2015 9:00 am ET

Haitian International Holdings Ltd. (Booth W3683) is introducing new machines to North American molders with four presses on display at its large...    More

Image

Flextronics launches global injection molding, tooling unit

March 26, 2015 4:29 pm ET

Flextronics International Ltd. (Booth S34125) is officially launching Precision Plastics, a global injection tooling and manufacturing unit, as a...    More

Image

Customs snafu snags Boy Machines

March 26, 2015 9:42 am ET

ORLANDO, FLA. — With apologies to poet Robert Burns, this year’s NPE in Orlando definitely proved that “sometimes the be...    More

Market Reports

Flexible Packaging Trends in North America

North America represents about 30 percent of the global consumption of flexible packaging. Annual growth in this region is forecast at 4 percent during the next 5 years.

For more insight on growth opportunities, drivers of growth and the outlook for 2015, download this report.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 billion plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Upcoming Plastics News Events

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events