Philpott Rubber goes after shale drilling market

Caitlin Cook

Published: January 15, 2013 6:00 am ET

Related to this story

Topics Injection Molding

BRUNSWICK, OHIO (Jan. 15, 11:30 a.m. ET) — Shortly after helping found Corrpro Cos. Inc. in Medina, Ohio, Mike Baach was transferred to Texas in 1979. He was assigned to an office just outside of Houston, where he learned the energy business and its players on Corrpro’s behalf.

Little did he know then that the experience would be a big asset more than 30 years later, right back where he started.

Corrpro’s forte was and still is preventing corrosion in underground pipelines. Baach moved back to Ohio in 1986 to assist the company in going public, and stuck with the firm for nearly 20 more years.

He learned along the way as Corrpro became a world leader in preventing not only pipelines, but refineries, storage facilities and other important infrastructure, from succumbing to deterioration.

He retired from Corrpro in 2005. A year later Baach took his now-valuable experience to Philpott Rubber Co., where he became CEO in 2009.

Oil and gas had not been a major growth market for Brunswick-based Philpott. For 123 years, it had been molding parts and supplies from rubber, plastic and specialty polymers, largely for industrial customers. Its products were things like conveyor belts and seals used in foundries or other heavy industries. It even made seals for toilets.

Like just about any mid-sized manufacturer in Ohio, Philpott always was on the lookout for new business — but new foundries and other big industrial prospects haven’t been exactly popping up like daisies on the Ohio landscape in recent years.

Fortunately, Baach’s familiarity with the energy sector from his days with Corrpro is helping Philpott Energy exploit opportunities in the Marcellus and Utica shale of Ohio and Pennsylvania.

“Energy hasn’t been a huge driver of industrial business for a while and when this started over with the Marcellus Shale activities, finds and developments, it came to mind to us that we better find a way to participate in this,” Baach said.

The company’s products already were performing well in the harsh environment of foundries, tire factories and other heavy industries, so Baach believed Philpott could make products tough enough to work on a drilling rig.

Philpott’s strategic plan called for entry into the energy market with new products, focused on the shale gas basins in West Virginia, Ohio, Pennsylvania and New York.

The company already made gaskets and other related items for the oil and gas industry, but Baach wanted Philpott to become a solutions provider rather than simply a manufacturer of generic parts.

In an eight-month period between 2010 and 2011, Philpott executives started looking toward the energy industry and their customers in it to determine where companies were experiencing problems.

The idea was to develop both products and services to meet customers’ challenges or find a third party addressing customer needs, such as a supplier or oil field service provider, and work with that firm.

Philpott learned, among other things, that a single fluid combining the properties of a lubricant and a viscosifier — in other words, one with the right amount of both thick and slippery properties — would help during the well completion process.

During their research, Philpott execs discovered CoilChem, a New Castle, Okla.-based company founded in 2009. CoilChem’s product is polymer-based and provided a natural alignment with Philpott’s expertise and strategies — and most importantly, an answer to the needs of new customers drilling for shale gas.

CoilChem developed specific formulas for specific drilling applications and also set out to minimize the amount of chemicals needed for the drilling and completion of each well. It also made them biodegradable.

CoilChem has four products that are injected into drilling wells during the completion phase to help reduce pipe-on-pipe friction and pump pressure, while creating varying viscosity levels. Philpott is its partner and sells and services the products for drillers and their suppliers in the Utica and Marcellus.

Both companies say they are benefiting from the partnership and sales are growing.

Philpott does not disclose its net income, but Baach said it doubled its revenues since 2009 and should book about $25 million in sales this year. Not coincidentally, perhaps, 2009 was the same year Baach brought his oil and gas experience to the helm and also just about time that drilling began heating up in Pennsylvania.

The company’s new Energy division, formed in 2011 to focus on the shale gas industry, already represents about 13 percent of Philpott’s total business.

For a full version of this story, see www.crainscleveland.com.


Comments

Philpott Rubber goes after shale drilling market

Caitlin Cook

Published: January 15, 2013 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Ford's final ACH plant, injection molder of HVAC systems, to close

October 22, 2014 1:58 pm ET

Ford Motor Co. will shed the last line of business in 9-year-old Automotive Component Holdings LLC by December when ACH closes its Plymouth, Mich.,...    More

Image

Comar merging with Convergence Packaging

October 21, 2014 5:07 pm ET

A couple of plastic packaging companies owned by private investment firm Graham Partners are merging into a single entity.    More

Image

Report: Suspected former Nazi with plastic connection collecting Social Security

October 20, 2014 3:52 pm ET

AKRON, OHIO — A one-time plastics executive in Akron is among dozens of suspected former Nazis who have been collecting U.S. Social Security...    More

Molder expands in France with new clean room

October 20, 2014 1:30 pm ET

Global Closure Systems (GCS), a global injection molding producer, showed off its new ISO 7 clean room at its Astra Plastique factory in France...    More

Molder goes to auction block

October 17, 2014 12:17 pm ET

An Illinois custom injection molding operation will be auctioned off after its owner decided to close the business.    More

Market Reports

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events