Henniges touts ability to cut weight from seals

Allison Strouse

Published: January 15, 2013 6:00 am ET

Related to this story

Topics Automotive, Sustainability, Pipe/Profile/Tubing

AUBURN HILLS, MICH. (Jan. 15, 11:30 a.m. ET) — Henniges Automotive Holdings Inc. has found ways to cut anywhere from eight to 12 pounds from vehicle weight through sealing alone.

“Our product has often been overlooked in the area of weight,” CEO Douglas DelGrosso said. “People focus on typically metal and steel to get weight off and if you think about the amount of sealing that is in the typical C-Class sedan, it’s a lot of product and rubber is heavy.”

In an environment fueled by meeting such standards as fuel efficiency and emissions reductions, being able to take weight off a vehicle wherever possible helps.

“If you find some creative ways to take off weight and take it to the customer in today’s environment with all the pressure that’s on them to meet, whether its CO2 standards or general emissions standards, we have tried to focus ourself there,” he said.

DelGrosso sees this as a big opportunity for his firm if it is able to show its customers the potential for such reductions.

“That’s a pretty significant amount of savings [in weight],” he said. “That represents about a 20-percent reduction in the overall weight. ... Some of it can be done without any additional costs.”

If done on a large enough scale, he added, it might even amount to a cost savings.

Going with plastic over rubber has been the answer in the past on occasion, according to Steve Murree, Henniges director of advanced product and process development. To help reduce the mass of the products, eliminating materials like rubber and metal have helped.

While the push for this mainly is coming from Henniges, the executives said there have been a few customers coming to the auto supplier looking for a solution.

“Each customer has their traditional way of engineering sealing,” DelGrosso said. “This is where we can be that catalyst.”

Looking over what the best practices and procedures are, he said this was the firm’s chance to approach its customers and say here is the best way to accomplish weight reduction.

“We can be in that eight- to maybe 11-pound range,” DelGrosso said.

“I think that requires a certain level of push from us. Not all [car makers] are out there doing those teardowns to get that type of data [on reducing weight in sealing].”

Getting the information to their customers isn’t the hard part though.

“One of the struggles is that the working level, their objective is to launch vehicles without issues,” Murree said. While they like the push from the company, lessening the weight and coming up with alternatives for sealing are not among their main objectives.

“We have to start attacking higher up and having them push it down as an objective,” he said.

Issues like fuel efficiency are not expected to go away anytime soon.

“What we are trying to do is be ahead of that because we can, and be there as a good value supplier and say we have some ideas that you didn’t traditionally look at for this product,” DelGrosso said.


Comments

Henniges touts ability to cut weight from seals

Allison Strouse

Published: January 15, 2013 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Residents ask court to close pipe maker

November 21, 2014 3:22 pm ET

Residents living by National Pipe & Plastics Inc.'s new factory in an industrial zone of Endicott, N.Y., say the facility has “devastated the...    More

Image

Ineos making its UK shale play

November 21, 2014 9:29 am ET

Chemical giant Ineos Group AG is planning to be the biggest player in the United Kingdom's shale gas industry.    More

Image

High pressure RTM systems moving from Europe to Mexico

November 20, 2014 4:24 pm ET

Engel Holding GmbH's subsidiary in Mexico says it has sold the first high pressure resin transfer machine system (HP-RTM) in the Americas to a...    More

Image

Thomson Plastics opens N.C. plant

November 20, 2014 3:12 pm ET

Custom injection molder Thomson Plastics Inc. has opened a new manufacturing facility in Lexington, N.C.    More

Image

New York City officials avoid taking a stand on plastic bag fee

November 20, 2014 11:28 am ET

New York Mayor Bill de Blasio's administration claimed Nov. 19 to be committed to dramatically reducing plastic bag consumption in New York City, but ...    More

Market Reports

Plastics in Brazil - State of the Industry Report

This in-depth report examines the Brazilian plastics industry from a historical and geographical context. Our analysts provide insight on economic trends and forecasts, growing manufacturing sectors that utilize plastics, private investment opportunities, market environment challenges, and innovations in R&D.

Data tables and charts on producer prices, trade, plastics production and end market indicators is also included.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events