Philpott Rubber goes after shale drilling market

Caitlin Cook

Published: January 15, 2013 6:00 am ET

Related to this story

Topics Injection Molding

BRUNSWICK, OHIO (Jan. 15, 11:30 a.m. ET) — Shortly after helping found Corrpro Cos. Inc. in Medina, Ohio, Mike Baach was transferred to Texas in 1979. He was assigned to an office just outside of Houston, where he learned the energy business and its players on Corrpro’s behalf.

Little did he know then that the experience would be a big asset more than 30 years later, right back where he started.

Corrpro’s forte was and still is preventing corrosion in underground pipelines. Baach moved back to Ohio in 1986 to assist the company in going public, and stuck with the firm for nearly 20 more years.

He learned along the way as Corrpro became a world leader in preventing not only pipelines, but refineries, storage facilities and other important infrastructure, from succumbing to deterioration.

He retired from Corrpro in 2005. A year later Baach took his now-valuable experience to Philpott Rubber Co., where he became CEO in 2009.

Oil and gas had not been a major growth market for Brunswick-based Philpott. For 123 years, it had been molding parts and supplies from rubber, plastic and specialty polymers, largely for industrial customers. Its products were things like conveyor belts and seals used in foundries or other heavy industries. It even made seals for toilets.

Like just about any mid-sized manufacturer in Ohio, Philpott always was on the lookout for new business — but new foundries and other big industrial prospects haven’t been exactly popping up like daisies on the Ohio landscape in recent years.

Fortunately, Baach’s familiarity with the energy sector from his days with Corrpro is helping Philpott Energy exploit opportunities in the Marcellus and Utica shale of Ohio and Pennsylvania.

“Energy hasn’t been a huge driver of industrial business for a while and when this started over with the Marcellus Shale activities, finds and developments, it came to mind to us that we better find a way to participate in this,” Baach said.

The company’s products already were performing well in the harsh environment of foundries, tire factories and other heavy industries, so Baach believed Philpott could make products tough enough to work on a drilling rig.

Philpott’s strategic plan called for entry into the energy market with new products, focused on the shale gas basins in West Virginia, Ohio, Pennsylvania and New York.

The company already made gaskets and other related items for the oil and gas industry, but Baach wanted Philpott to become a solutions provider rather than simply a manufacturer of generic parts.

In an eight-month period between 2010 and 2011, Philpott executives started looking toward the energy industry and their customers in it to determine where companies were experiencing problems.

The idea was to develop both products and services to meet customers’ challenges or find a third party addressing customer needs, such as a supplier or oil field service provider, and work with that firm.

Philpott learned, among other things, that a single fluid combining the properties of a lubricant and a viscosifier — in other words, one with the right amount of both thick and slippery properties — would help during the well completion process.

During their research, Philpott execs discovered CoilChem, a New Castle, Okla.-based company founded in 2009. CoilChem’s product is polymer-based and provided a natural alignment with Philpott’s expertise and strategies — and most importantly, an answer to the needs of new customers drilling for shale gas.

CoilChem developed specific formulas for specific drilling applications and also set out to minimize the amount of chemicals needed for the drilling and completion of each well. It also made them biodegradable.

CoilChem has four products that are injected into drilling wells during the completion phase to help reduce pipe-on-pipe friction and pump pressure, while creating varying viscosity levels. Philpott is its partner and sells and services the products for drillers and their suppliers in the Utica and Marcellus.

Both companies say they are benefiting from the partnership and sales are growing.

Philpott does not disclose its net income, but Baach said it doubled its revenues since 2009 and should book about $25 million in sales this year. Not coincidentally, perhaps, 2009 was the same year Baach brought his oil and gas experience to the helm and also just about time that drilling began heating up in Pennsylvania.

The company’s new Energy division, formed in 2011 to focus on the shale gas industry, already represents about 13 percent of Philpott’s total business.

For a full version of this story, see www.crainscleveland.com.


Comments

Philpott Rubber goes after shale drilling market

Caitlin Cook

Published: January 15, 2013 6:00 am ET

Post Your Comments


Back to story


More stories

Spain's ITC Packaging acquires Coveris rigids plant

July 31, 2014 9:59 am ET

International packaging group Coveris Holdings has sold its Spanish business Coveris Rigid Spain, including an injection molding plant, to the...    More

Image

Tessy investing $10 million in new plant, infrastructure

July 30, 2014 4:57 pm ET

Tessy Plastics Corp. continues to buy factory buildings in upstate New York — acquiring a 112,000-square-foot former Honeywell building in...    More

Image

One51 adding injection molder Straight to its bin molding portfolio

July 29, 2014 10:12 am ET

Dublin-based One51 plc has had its purchase of British trash bin maker Straight plc cleared by the United Kingdom's Competition and Markets Authority.    More

Image

Columbine Plastics moving to new Colorado site

July 25, 2014 11:38 am ET

Custom injection molder Columbine Plastics Corp. plans to move from Boulder, Colo., to the Colorado Technical Center in Louisville, Colo.    More

Image

Metals and plastics company NN to buy Autocam in $300 million deal

July 25, 2014 10:07 am ET

A Tennessee metals and plastics company said it has agreed to acquire auto parts supplier Autocam Corp. in a deal valued at $300 million.    More

Market Reports

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events