PET thermoformer MicroGreen plans to expand

Published: January 17, 2013 2:04 pm ET
Updated: January 17, 2013 2:09 pm ET

Related to this story

Topics Packaging, Film & Sheet, Thermoforming

ARLINGTON, WASH. -- MicroGreen Polymers Inc. plans to expand its production capacity, a project jump started by a $5 million investment from the Stillaguamish Tribe of Indians.

MicroGreen is looking to raise $20 million in this round of funding. The funds will go toward purchasing new equipment and tooling, and will take the company from producing on a small, testing-scale to producing at commercial capacity, said Chris Jacobs, vice president of marketing and product development, in a phone interview.

MicroGreen uses patented technology, named Ad-air, to add microbubbles to solid sheets of recycled PET. According to MicroGreen, the company uses its expanded PET to thermoform cups and trays that are lightweight and require less material to produce, contain up to 50 percent post-consumer content and are insulated and temperature resistant.

MicroGreen plans to add several new production lines and invest in tooling to expand its line of cups and trays.

The company currently operates one thermoforming line – an R&D line – that can produce a few hundred-million pieces a year.

"In the food service world, that's not much," Jacobs said.

"There's so much opportunity out there," he said. "Even if we only aim for the low-hanging fruit, we'll need 20 to 30 production lines."

The company will also purchase an extruder. Right now, MicroGreen buys sheets of PET with up to 50 percent recycled content. Extruding in-house will allow the company to raise the amount of recycled content, Jacobs said.

With the increased production capacity, MicroGreen needs more employees. The company currently employs 45, but plans to employ 200-300 by year end, Jacobs said.

MicroGreen operates one facility in Arlington, Wash. The company has room to expand at its current site, but increasing the size of its current plant or opening a new one will depend on customer's needs and requirements, he added.

The company is still working on meeting its $20 million mark. MicroGreen is in talk with venture capitalist inventors, but the Stillaguamish Tribe also is helping out.

Koran Andrews, the Stillaguamish Tribe's enterprise corporation CEO, and other tribal members toured MicroGreen's facility last year. The Tribe purchased cups for its Angel of the Winds Casino in Arlington, and were so impressed with MicroGreen's process and mission that they asked about becoming investors, Jacobs said.

"That's how they got turned on to it, knowing that our focus was about showing people that being successful in business and doing the right thing environmentally, and for the world, is not mutually exclusive," he said.

The Stillaguamish Tribe was also looking to diversify its investment portfolio. The Tribe is now working to put together a consortium with other Native American tribes that have the same goal to invest in MicroGreen.

The Stillaguamish Tribe's initial investment was enough to get MicroGreen started, and the company plans to move forward with just the $5 million secured.

The company plans to close this round of funding by the end of the first quarter, when it closes they'll know "how steep the on-ramp really is," Jacobs said.


Comments

PET thermoformer MicroGreen plans to expand

Published: January 17, 2013 2:04 pm ET
Updated: January 17, 2013 2:09 pm ET

Post Your Comments


Back to story


More stories

Image

Optical disc molder OEM getting into micromolding with acquisition of CDA

August 29, 2014 11:24 am ET

Optical disc replicator and molder Optical Experts Manufacturing Inc. of Charlotte, N.C., has expanded its core business and entered new high...    More

Image

Poor plastic coating prompts cable recall

August 29, 2014 2:10 pm ET

Australia's competition regulator, the Australian Competition and Consumer Commission (ACCC), has ordered a major recall of 2,485 miles of electrical ...    More

Image

Baxter investing $300 million to expand dialyzers production in Alabama

August 29, 2014 12:53 pm ET

Baxter International, Inc. is expanding its Opelika, Ala. manufacturing location to boost production of dialyzers, a key component of hemodialysis...    More

Image

Obituary: Jerry Williams, Prism Plastics co-owner

August 29, 2014 8:50 am ET

Williams founded Prism Plastics with Rod Bricker and Gerry Phillips, after the three left Huron Plastics Group in 1999.    More

Image

EPA fines RI polymer company

August 29, 2014 1:20 pm ET

A Rhode Island polymer manufacturer has reached a $60,000 settlement with the U.S. Environmental Protection Agency (EPA) for violating federal clean a...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events