PET thermoformer MicroGreen plans to expand

Published: January 17, 2013 2:04 pm ET
Updated: January 17, 2013 2:09 pm ET

Related to this story

Topics Packaging, Film & Sheet, Thermoforming

ARLINGTON, WASH. -- MicroGreen Polymers Inc. plans to expand its production capacity, a project jump started by a $5 million investment from the Stillaguamish Tribe of Indians.

MicroGreen is looking to raise $20 million in this round of funding. The funds will go toward purchasing new equipment and tooling, and will take the company from producing on a small, testing-scale to producing at commercial capacity, said Chris Jacobs, vice president of marketing and product development, in a phone interview.

MicroGreen uses patented technology, named Ad-air, to add microbubbles to solid sheets of recycled PET. According to MicroGreen, the company uses its expanded PET to thermoform cups and trays that are lightweight and require less material to produce, contain up to 50 percent post-consumer content and are insulated and temperature resistant.

MicroGreen plans to add several new production lines and invest in tooling to expand its line of cups and trays.

The company currently operates one thermoforming line – an R&D line – that can produce a few hundred-million pieces a year.

"In the food service world, that's not much," Jacobs said.

"There's so much opportunity out there," he said. "Even if we only aim for the low-hanging fruit, we'll need 20 to 30 production lines."

The company will also purchase an extruder. Right now, MicroGreen buys sheets of PET with up to 50 percent recycled content. Extruding in-house will allow the company to raise the amount of recycled content, Jacobs said.

With the increased production capacity, MicroGreen needs more employees. The company currently employs 45, but plans to employ 200-300 by year end, Jacobs said.

MicroGreen operates one facility in Arlington, Wash. The company has room to expand at its current site, but increasing the size of its current plant or opening a new one will depend on customer's needs and requirements, he added.

The company is still working on meeting its $20 million mark. MicroGreen is in talk with venture capitalist inventors, but the Stillaguamish Tribe also is helping out.

Koran Andrews, the Stillaguamish Tribe's enterprise corporation CEO, and other tribal members toured MicroGreen's facility last year. The Tribe purchased cups for its Angel of the Winds Casino in Arlington, and were so impressed with MicroGreen's process and mission that they asked about becoming investors, Jacobs said.

"That's how they got turned on to it, knowing that our focus was about showing people that being successful in business and doing the right thing environmentally, and for the world, is not mutually exclusive," he said.

The Stillaguamish Tribe was also looking to diversify its investment portfolio. The Tribe is now working to put together a consortium with other Native American tribes that have the same goal to invest in MicroGreen.

The Stillaguamish Tribe's initial investment was enough to get MicroGreen started, and the company plans to move forward with just the $5 million secured.

The company plans to close this round of funding by the end of the first quarter, when it closes they'll know "how steep the on-ramp really is," Jacobs said.


Comments

PET thermoformer MicroGreen plans to expand

Published: January 17, 2013 2:04 pm ET
Updated: January 17, 2013 2:09 pm ET

Post Your Comments


Back to story


More stories

Image

French investment firm buys Alabama-based CSP Technologies

January 30, 2015 1:10 pm ET

A French investment firm has finalized a deal to buy CSP Technologies Inc., an Auburn, Ala., company that makes specialty plastics packaging.    More

Image

Report: Brands are falling short on packaging sustainability

January 29, 2015 5:19 pm ET

Packaging in general, and plastic packaging in particular, has a long way to go in terms of recycling, according to a pair of environmental groups.    More

Image

Lund adds to aftermarket auto products portfolio with buy of Bushwacker

January 29, 2015 2:49 pm ET

Lund International Inc. has expanded its portfolio of plastic aftermarket vehicle accessories by acquiring Bushwacker Inc.    More

Image

Profit dips at Bemis Co. Inc.

January 29, 2015 2:04 pm ET

Profit dipped for Bemis Co. Inc. for all of 2014, but were up during the fourth quarter in what the company's leader called a “pivotal year....    More

Image

Falcon Plastics expands in South Dakota

January 29, 2015 11:45 am ET

Falcon Plastics Inc. is putting the final touches on a 60,000 square foot addition that will nearly double the size of its Brookings, S.D., manufactur...    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events