PET thermoformer MicroGreen plans to expand

Published: January 17, 2013 2:04 pm ET
Updated: January 17, 2013 2:09 pm ET

Related to this story

Topics Packaging, Film & Sheet, Thermoforming

ARLINGTON, WASH. -- MicroGreen Polymers Inc. plans to expand its production capacity, a project jump started by a $5 million investment from the Stillaguamish Tribe of Indians.

MicroGreen is looking to raise $20 million in this round of funding. The funds will go toward purchasing new equipment and tooling, and will take the company from producing on a small, testing-scale to producing at commercial capacity, said Chris Jacobs, vice president of marketing and product development, in a phone interview.

MicroGreen uses patented technology, named Ad-air, to add microbubbles to solid sheets of recycled PET. According to MicroGreen, the company uses its expanded PET to thermoform cups and trays that are lightweight and require less material to produce, contain up to 50 percent post-consumer content and are insulated and temperature resistant.

MicroGreen plans to add several new production lines and invest in tooling to expand its line of cups and trays.

The company currently operates one thermoforming line – an R&D line – that can produce a few hundred-million pieces a year.

"In the food service world, that's not much," Jacobs said.

"There's so much opportunity out there," he said. "Even if we only aim for the low-hanging fruit, we'll need 20 to 30 production lines."

The company will also purchase an extruder. Right now, MicroGreen buys sheets of PET with up to 50 percent recycled content. Extruding in-house will allow the company to raise the amount of recycled content, Jacobs said.

With the increased production capacity, MicroGreen needs more employees. The company currently employs 45, but plans to employ 200-300 by year end, Jacobs said.

MicroGreen operates one facility in Arlington, Wash. The company has room to expand at its current site, but increasing the size of its current plant or opening a new one will depend on customer's needs and requirements, he added.

The company is still working on meeting its $20 million mark. MicroGreen is in talk with venture capitalist inventors, but the Stillaguamish Tribe also is helping out.

Koran Andrews, the Stillaguamish Tribe's enterprise corporation CEO, and other tribal members toured MicroGreen's facility last year. The Tribe purchased cups for its Angel of the Winds Casino in Arlington, and were so impressed with MicroGreen's process and mission that they asked about becoming investors, Jacobs said.

"That's how they got turned on to it, knowing that our focus was about showing people that being successful in business and doing the right thing environmentally, and for the world, is not mutually exclusive," he said.

The Stillaguamish Tribe was also looking to diversify its investment portfolio. The Tribe is now working to put together a consortium with other Native American tribes that have the same goal to invest in MicroGreen.

The Stillaguamish Tribe's initial investment was enough to get MicroGreen started, and the company plans to move forward with just the $5 million secured.

The company plans to close this round of funding by the end of the first quarter, when it closes they'll know "how steep the on-ramp really is," Jacobs said.


Comments

PET thermoformer MicroGreen plans to expand

Published: January 17, 2013 2:04 pm ET
Updated: January 17, 2013 2:09 pm ET

Post Your Comments


Back to story


More stories

Image

Atkore expands in PVC conduit, buying American Pipe & Plastics

October 20, 2014 6:06 pm ET

Atkore International Inc. of Harvey, Ill., has acquired PVC conduit maker American Pipe & Plastics Inc. of Kirkwood, N.Y., which serves the...    More

Image

Report: Suspected former Nazi with plastic connection collecting Social Security

October 20, 2014 3:52 pm ET

AKRON, OHIO — A one-time plastics executive in Akron is among dozens of suspected former Nazis who have been collecting U.S. Social Security...    More

Image

Messe Düsseldorf supports Plastindia move, but with reservations

October 20, 2014 2:45 pm ET

Germany's Messe Düsseldorf, the largest overseas partner of the Plastindia show, has given its support to the last-minute move of Plastindia to a new ...    More

Image

Petition asks for Plastindia to move back to Delhi, PIF board member resigns

October 20, 2014 2:28 pm ET

A member of Plastindia Foundation's management board has quit the organization to protest the manner in which the group moved its namesake Plastindia ...    More

Image

Trexel charges patent infringement against Taiwan company

October 20, 2014 3:25 pm ET

Trexel Inc., the supplier of the MuCell microcellular foaming technology, is accusing a Taiwanese company, Chuan Lih Fa Machinery Works, of violating ...    More

Market Reports

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events