Reinventing the wheel

By Rhoda Miel
News Editor

Published: January 18, 2013 2:32 pm ET
Updated: January 18, 2013 2:51 pm ET

Image By: Ford Motor Co. The shutters on the wheels of Ford's Atlas pickup-truck concept, above, deploy across wheel openings when the truck is moving to keep air flowing smoothly across the wheels.

Related to this story

Topics Automotive

DETROIT — Sometimes, it's not just about the weight.

While Lacks Wheel Trim Systems LLC's new eVOLVE wheel concept does reduce the weight of a traditional aluminum or steel wheel, the Grand Rapids, Mich.-based auto supplier says it is aerodynamics that provides the final push in a proposal that would improve fuel performance by 1.1 miles per gallon in its tests.

"Just taking the weight out of the wheel is not enough," said James Ardern, Lacks business development director, during an interview at the North American International Auto Show in Detroit Jan. 15. "We found that in creating more aerodynamic shapes, we added weight, but improved performance."

Those aerodynamic improvements come courtesy of a hybrid-material part, which builds on an aluminum structure, then adds a high density foam and a polycarbonate/ABS top coat, which is then given a chrome top coat for aesthetics.

Chrome is a specialty of Lacks Enterprises Inc., the parent company of Lacks Wheel Trim. The company counts itself as the largest produced of chromed plastics in the North American auto supply base, and its Wheel Trim Systems business has been a key supplier to the auto industry, giving the chrome polish to aluminum and steel wheels.

Two years ago, the company decided to invest big time in developing a new market within the automotive wheel business, however, looking at what else it could provide to an industry looking to squeeze more miles out of every gallon of gasoline.

In the U.S., a new federal standard requires automakers to hit a corporate average fuel economy of 54.5 miles per gallons by 2025, a move which is prompting automakers to reconsider weight and design.

Lacks based its development tests and prototypes on a Ford Motor Co. Focus sedan.

"Wheels are the black hole for fuel performance," said Jim Zubkus, director of sales and marketing.

The aerodynamic issue for improved gas mileage takes a close look at the openings in every wheel. Those openings are needed to help cool the brakes under pressure, but at high speeds, they interrupt the flow of air around the vehicle.

By using foam and PC/ABS to reshape the outside of the wheel, Lacks' eVOLVE keeps the air moving swiftly past the vehicle, improving performance.

Traditional steel and aluminum would add too much weight to make the aerodynamics worthwhile, Ardern said, but foam doesn't add much weight, and the PC/ABS provides the perfect surface to give the wheel its traditional chromed shine.

The final wheel still comes in 4.5 pounds lighter than a traditional steel wheel, he noted.

Lacks is not alone at looking at the potential to improve wheel aerodynamics and fuel performance. Ford Motor Co.'s new Atlas pickup-truck concept, also introduced Jan. 15, places active shutters on the wheel.

The shutters deploy across the wheel openings when the truck is in motion, keeping the air flowing smoothly across the wheels. When the driver hits the brake — or the truck is stopped — the shutters fold back out of the way.

Ford would use the power from braking to power the shutters.

At Lacks, the eVOLVE is getting a lot of attention from automakers, just a month after the company first began showing it.

"Clearly, there are people looking at this area for development," Ardern said.

Lacks has been hearing from interested automakers since it first rolled out the eVOLVE in December, and the company expects that will only grow as the CAFE requirements build.

"Fuel economy will drive this," Zubkus said.


Comments

Reinventing the wheel

By Rhoda Miel
News Editor

Published: January 18, 2013 2:32 pm ET
Updated: January 18, 2013 2:51 pm ET

Post Your Comments


Back to story


More stories

Image

Plastic products win Best of IBS awards

January 30, 2015 1:36 pm ET

LAS VEGAS — A year ago, inventor Jeremy Smith of Utah took his idea for an electrical outlet cover plate with LED lights on the bottom edge to...    More

Image

Lund adds to aftermarket auto products portfolio with buy of Bushwacker

January 29, 2015 2:49 pm ET

Lund International Inc. has expanded its portfolio of plastic aftermarket vehicle accessories by acquiring Bushwacker Inc.    More

Image

Plastics News Now: Losing weight with style, plastics in the Dragons' Den

January 29, 2015 6:00 am ET

A 19-year-old entrepreneur brings business to a U.K. injection molder after winning support on TV's Dragons' Den, auto suppliers combine...    More

Image

Plastics help Volt hit new target

January 28, 2015 1:54 pm ET

The 2016 Volt, unveiled at the North American International Auto Show in Detroit in January, features a sportier exterior design — GM calls it...    More

Image

It's becoming a seller's market for plastics firms

January 27, 2015 11:37 am ET

The pace of plastics mergers and acquisitions activity slowed a bit in the second half of 2014 — but market watchers have high expectations for ...    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events