Haier plans stake in toy maker Lung Cheong

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: January 18, 2013 10:20 am ET
Updated: January 18, 2013 10:33 am ET

Related to this story

Topics China, Consumer Products, Injection Molding

QINGDAO, CHINA -- A subsidiary of giant Chinese appliance maker Haier Group plans to take a 25 percent ownership stake in plastic toy maker and injection molder Lung Cheong International Holdings Ltd.

The deal is part of Lung Cheong's strategy to diversify its markets and strengthen its position in a challenging global toy industry.

Hong Kong-based Lung Cheong said the HK$278 million (US$35.9 million) investment by Haier would give the company additional resources and let it tap into Haier's experience building a global brand in the appliance industry, as the toy maker tries to expand business for its own branded toys.

The investment is coming from Haier Electrical Appliances Second (BVI) Holdings Ltd., a wholly owned subsidiary of Haier Investment, one of the investment companies within Qingdao, Shandong-based Haier, Lung Cheong told the Hong Kong Stock Market in a recent filing.

"The directors are of the opinion that by inviting Haier Electrical Appliances Second as strategic investor, the group can draw on the successful experience of Haier Group of companies in particular, in building up a well-known worldwide brand name and efficient manufacturing management and worldwide distribution channel," Lung Cheong said.

The toy maker declined further comment while the investment is pending completion, but said it believes Haier can help it "improve its business strategy towards the competitive toy manufacturing industry in recent years due to the uncertainties and soft demand from North American and European markets."

Haier has built itself into a global brand whose products are sold in over 100 countries, Lung Cheong said.

The firm also said the Haier investment was part of a plan to explore other markets outside the toy business, although in its stock filing it did not provide details.

"The directors are concerned that the global toy industry will continue to face challenges in the future… [and] have been actively exploring all possibilities of selective mergers, acquisitions and divestments to reduce the group's reliance on its toy business so as to seek alternate sources of revenue from new ventures," it said.

The Haier unit is buying 1.39 billion shares of Lung Cheong, which would officially give it a 25.47 percent ownership stake. Haier's purchase is part of a placement of 2 billion new shares the company is issuing from which it hopes to raise almost HK$400 million (US$51.5 million).

The Haier investment would be the latest of a series of significant moves for Lung Cheong. The company sold itsChinafactories in 2011 to Brisk Mark Holdings, a company owned by the son and brother of Lung Cheong's executive director Leung Lun.

Brisk Mark is 70 percent owned by Leung Kenneth Yuk Wai, Leung Lun's son, and 30 percent by Leung Chung Ming, Leung Lun's brother and a former executive director of Lung Cheong until April 2011, when he resigned as part of the sale to Brisk Mark.

Lung Cheong then set up a new 2,800 employee factory inIndonesia, where it said labor costs were lower than inChina.

In the six months ending in September, the company said its sales dropped 54 percent, to HK$146 million (US$18.8 million), owing to a difficult business environment and some of the company's global toy brand customers declining to move their production to the Indonesia factory.


Comments

Haier plans stake in toy maker Lung Cheong

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: January 18, 2013 10:20 am ET
Updated: January 18, 2013 10:33 am ET

Post Your Comments


Back to story


More stories

Image

Bankruptcy court confirms GSE reorganization plan

July 29, 2014 4:01 pm ET

The U.S. Bankruptcy Court in Wilmington, Del., has confirmed the reorganization plan for geomembranes maker GSE Environmental Inc.    More

Image

Vinyl siding's lead slips, but industry pushing back

July 29, 2014 2:04 pm ET

Vinyl siding continues to be the top cladding choice for home builders and remodelers but fiber cement is gaining ground — at an alarming rate...    More

Unipex Group buys Ferguson Chemical Innovation

July 29, 2014 1:57 pm ET

Chemical distributor Unipex Group Inc. announced July 29 that it had purchased Ferguson Chemical Innovation, a Brampton, Ontario-based supplier of...    More

Image

Magna expanding interiors site in Slovakia

July 29, 2014 1:47 pm ET

Magna International Inc. plans to nearly double the size of its manufacturing facility in Trnava, in western Slovakia, to accommodate new automotive...    More

Image

Obituary: Andrew 'A.J.' Janosko

July 29, 2014 12:14 pm ET

WASHINGTON — Andrew “A.J.” Janosko, the former director of trade show operations for the Society of Plastics Industry Inc., died on ...    More

Market Reports

Plastics Recyclers Data Report & Directory

This exclusive MS Excel database contains all the companies from Plastics News' ranking of top North American Recyclers and Brokers by reprocessed volume and also includes a directory with materials processes, services offered and company contact information. Data is based on primary research by PN editorial staff.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events