Dynisco unveils accurate, direct pressure sensor

By Bill Bregar
Senior Staff Reporter

Published: January 18, 2013 9:29 am ET
Updated: January 18, 2013 10:33 am ET

Related to this story

Topics Extrusion, Extrusion dies/tooling

FRANKLIN, MASS. -- Dynisco LLC is taking the direct approach with the new Vertex sensor, which measures melt pressure in extrusion directly, with no mercury or other liquid-fill materials, or complicated mechanical push rods.

After 10 years of development, the result is a robust pressure sensor that measures pressure more accurately, with a faster response, than traditional sensors, according to Dynisco officials.

"If you get rid of the fill materials, you have a more direct measurement. It's more accurate and more reliable," said Matthew Carrara, vice president and general manager.

Patents are pending on the capacitance technology. Melt pressure is registered directly through a single diaphragm, which is six times thicker than those on other sensors. It is made of Inconel 718 allow and coated with Dynisco's diamond-hardened DyMax, for extra protection against abrasion and corrosion.

Dynisco of Franklin is offering a longer, four-year warranty for the unit.

With Vertex,Carrarasaid, Dynisco has approached the "holy grail" of melt sensors, sensitive instruments that have to be sturdy to withstand high temperatures, pressures and other stresses in extrusion.

"I would argue that it would be the most perfect sensor on the market," Cararra said. "It addresses all the concerns of people in the market."

Mike Davis, senior product manager said representatives from every department at Dynisco participated in developing Vertex. Taking a consultative approach, they asked customers what they wanted in a sensor. A five-person team, from engineering, sales, operations engineering and marketing, worked on functionality of the sensor, and also manufacturing, marketing, sales and service.

"The entire way that this was developed internally was totally different,"Davissaid.

As a result, the new design cuts lead times from up to 14 weeks to fewer than 14 days. Vertex is designed to be a drop-in replacement for existing sensors. The new sensor can handle temperatures as high as 660°F.

Located along the barrel, melt pump and screen changer, the melt pressure sensors play a key role in consistency, throughout, quality and safety. The tip is exposed to the molten plastic, and traditionally, mercury has been placed between the sensing diaphragm and the sensitive electronics, to protect them from the heat. To replace mercury, sensor manufacturers have used other fill materials, such as sodium-potassium, oil and gallium. But mercury is still commonly used, Dynisco officials said, adding that Vertex shows that a fill medium, which results in an indirect measurement, is not needed.


Comments

Dynisco unveils accurate, direct pressure sensor

By Bill Bregar
Senior Staff Reporter

Published: January 18, 2013 9:29 am ET
Updated: January 18, 2013 10:33 am ET

Post Your Comments


Back to story


More stories

Image

Residents ask court to close pipe maker

November 21, 2014 3:22 pm ET

Residents living by National Pipe & Plastics Inc.'s new factory in an industrial zone of Endicott, N.Y., say the facility has “devastated the...    More

Image

Plastics News by the year: 1989

November 21, 2014 6:00 am ET

As Plastics News marks its 25th year of publication, we take a year-by-year look back at some of the events, people and curious coincidences that...    More

Image

Small is beautiful in Nissei's newest press

November 21, 2014 2:14 pm ET

Responding to customer demand for flexibility, Japanese plastics-equipment manufacturer Nissei Plastic Industrial Co. Ltd. is demoing a caster-...    More

Image

Cartoonist Rich Williams: If I could make HDPE funny, my powers would be limitless

November 21, 2014 1:41 pm ET

For the past 25 years, Rich Williams has been a fixture in the Plastics News staff box, and on our editorial page. Rich “speaks” to our...    More

Image

Three advancements have driven injection molding technology

November 21, 2014 6:00 am ET

Injection molding technology has made major advances in the last 25 years, from largely a world of shoot-and-ship to doing as much as possible at the ...    More

Market Reports

Plastics in Brazil - State of the Industry Report

This in-depth report examines the Brazilian plastics industry from a historical and geographical context. Our analysts provide insight on economic trends and forecasts, growing manufacturing sectors that utilize plastics, private investment opportunities, market environment challenges, and innovations in R&D.

Data tables and charts on producer prices, trade, plastics production and end market indicators is also included.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events