Dynisco unveils accurate, direct pressure sensor

By Bill Bregar
Senior Staff Reporter

Published: January 18, 2013 9:29 am ET
Updated: January 18, 2013 10:33 am ET

Related to this story

Topics Extrusion, Extrusion dies/tooling

FRANKLIN, MASS. -- Dynisco LLC is taking the direct approach with the new Vertex sensor, which measures melt pressure in extrusion directly, with no mercury or other liquid-fill materials, or complicated mechanical push rods.

After 10 years of development, the result is a robust pressure sensor that measures pressure more accurately, with a faster response, than traditional sensors, according to Dynisco officials.

"If you get rid of the fill materials, you have a more direct measurement. It's more accurate and more reliable," said Matthew Carrara, vice president and general manager.

Patents are pending on the capacitance technology. Melt pressure is registered directly through a single diaphragm, which is six times thicker than those on other sensors. It is made of Inconel 718 allow and coated with Dynisco's diamond-hardened DyMax, for extra protection against abrasion and corrosion.

Dynisco of Franklin is offering a longer, four-year warranty for the unit.

With Vertex,Carrarasaid, Dynisco has approached the "holy grail" of melt sensors, sensitive instruments that have to be sturdy to withstand high temperatures, pressures and other stresses in extrusion.

"I would argue that it would be the most perfect sensor on the market," Cararra said. "It addresses all the concerns of people in the market."

Mike Davis, senior product manager said representatives from every department at Dynisco participated in developing Vertex. Taking a consultative approach, they asked customers what they wanted in a sensor. A five-person team, from engineering, sales, operations engineering and marketing, worked on functionality of the sensor, and also manufacturing, marketing, sales and service.

"The entire way that this was developed internally was totally different,"Davissaid.

As a result, the new design cuts lead times from up to 14 weeks to fewer than 14 days. Vertex is designed to be a drop-in replacement for existing sensors. The new sensor can handle temperatures as high as 660°F.

Located along the barrel, melt pump and screen changer, the melt pressure sensors play a key role in consistency, throughout, quality and safety. The tip is exposed to the molten plastic, and traditionally, mercury has been placed between the sensing diaphragm and the sensitive electronics, to protect them from the heat. To replace mercury, sensor manufacturers have used other fill materials, such as sodium-potassium, oil and gallium. But mercury is still commonly used, Dynisco officials said, adding that Vertex shows that a fill medium, which results in an indirect measurement, is not needed.


Comments

Dynisco unveils accurate, direct pressure sensor

By Bill Bregar
Senior Staff Reporter

Published: January 18, 2013 9:29 am ET
Updated: January 18, 2013 10:33 am ET

Post Your Comments


Back to story


More stories

Image

Super typhoon ravages South China

July 21, 2014 3:58 pm ET

Super Typhoon Rammasun, the most powerful typhoon that has landed in China in four decades, has left parts of South China devastated, and the local...    More

Image

Newell Rubbermaid to acquire Contigo brand

July 21, 2014 5:00 pm ET

Consumer products company Newell Rubbermaid Inc. has signed an agreement to acquire Ignite Holdings LLC, owner of the Contigo and Avex brands of...    More

Image

Windmöller & Hölscher looking to continued growth in China

July 21, 2014 3:40 pm ET

With 2013 global sales of 600 million euros, China has grown into an important export market for Windmöller & Hölscher KG, second only to the United...    More

San Antonio launching curbside recycling of plastic bags

July 21, 2014 3:06 pm ET

Curbside plastic bag recycling is coming to one of the largest cities in the country.    More

Image

Grocery store chain says bag recycling up by 10 percent

July 21, 2014 2:54 pm ET

Kroger Co., with more than 2,600 stores in 34 states and sales nearing $100 billion, saw plastic bag recycling increase by 10 percent last year.    More

Market Reports

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Plastics Recycling Market Review & Outlook 2014

This special report from Plastics News examines the North American plastics recycling industry and provides insight into indicators that impact market viability, including Resin pricing trends for virgin and recycled market material and historical Resin production trends for post- consumer and industrial waste.

Learn more

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events