Dynisco unveils accurate, direct pressure sensor

By Bill Bregar
Senior Staff Reporter

Published: January 18, 2013 9:29 am ET
Updated: January 18, 2013 10:33 am ET

Related to this story

Topics Extrusion, Extrusion dies/tooling

FRANKLIN, MASS. -- Dynisco LLC is taking the direct approach with the new Vertex sensor, which measures melt pressure in extrusion directly, with no mercury or other liquid-fill materials, or complicated mechanical push rods.

After 10 years of development, the result is a robust pressure sensor that measures pressure more accurately, with a faster response, than traditional sensors, according to Dynisco officials.

"If you get rid of the fill materials, you have a more direct measurement. It's more accurate and more reliable," said Matthew Carrara, vice president and general manager.

Patents are pending on the capacitance technology. Melt pressure is registered directly through a single diaphragm, which is six times thicker than those on other sensors. It is made of Inconel 718 allow and coated with Dynisco's diamond-hardened DyMax, for extra protection against abrasion and corrosion.

Dynisco of Franklin is offering a longer, four-year warranty for the unit.

With Vertex,Carrarasaid, Dynisco has approached the "holy grail" of melt sensors, sensitive instruments that have to be sturdy to withstand high temperatures, pressures and other stresses in extrusion.

"I would argue that it would be the most perfect sensor on the market," Cararra said. "It addresses all the concerns of people in the market."

Mike Davis, senior product manager said representatives from every department at Dynisco participated in developing Vertex. Taking a consultative approach, they asked customers what they wanted in a sensor. A five-person team, from engineering, sales, operations engineering and marketing, worked on functionality of the sensor, and also manufacturing, marketing, sales and service.

"The entire way that this was developed internally was totally different,"Davissaid.

As a result, the new design cuts lead times from up to 14 weeks to fewer than 14 days. Vertex is designed to be a drop-in replacement for existing sensors. The new sensor can handle temperatures as high as 660°F.

Located along the barrel, melt pump and screen changer, the melt pressure sensors play a key role in consistency, throughout, quality and safety. The tip is exposed to the molten plastic, and traditionally, mercury has been placed between the sensing diaphragm and the sensitive electronics, to protect them from the heat. To replace mercury, sensor manufacturers have used other fill materials, such as sodium-potassium, oil and gallium. But mercury is still commonly used, Dynisco officials said, adding that Vertex shows that a fill medium, which results in an indirect measurement, is not needed.


Comments

Dynisco unveils accurate, direct pressure sensor

By Bill Bregar
Senior Staff Reporter

Published: January 18, 2013 9:29 am ET
Updated: January 18, 2013 10:33 am ET

Post Your Comments


Back to story


More stories

Image

Ohio molder Denbro Plastics moves to new location

September 29, 2014 6:17 pm ET

Logo products injection molder Denbro Plastics Co. has moved to another plant within Toledo, Ohio, to streamline production and improve efficiency.    More

Image

Audacious vandal stuns Taipei Plas

September 29, 2014 4:59 pm ET

Melodrama erupted at the traditionally tranquil Taipei Plas trade show on Sept. 28 when a mysterious intruder flung red paint at the Baumüller...    More

Image

Germans, Chinese question Plastindia move to Gujarat

September 29, 2014 4:39 pm ET

Two major international partners of the Plastindia trade show have raised serious concerns about the show organizer's decision to move it to another...    More

Image

iPhone 6 supplier Jabil accused of labor violations

September 29, 2014 6:00 pm ET

The same Jabil Circuit Inc. facility in Wuxi, China that faced labor violation accusations last September just before the iPhone 5S and 5C release is ...    More

Image

Asahi Kasei breaks ground on Alabama compounding plant

September 29, 2014 5:39 pm ET

Asahi Kasei Plastics North America will be able to solve two problems at once with a new compounding plant in Athens, Ala.    More

Market Reports

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our industry analysis highlights macro industry trends and micro trends faced by companies that do business in Mexico. The report also provides key industry statistics and forecasts to anticipate future industry expansion.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events