Cadillac boasts battery system

By Rhoda Miel
News Editor

Published: January 22, 2013 3:55 pm ET
Updated: January 22, 2013 4:16 pm ET

Image By: General Motors Co. A structural view of the 2014 Cadillac ELR highlights the T-shaped lithium-ion battery system.

Related to this story

Topics Automotive, Automotive parts, Automotive/transportation, Injection Molding

DETROIT — General Motors Co. introduced its take on the electric car to the auto market with its Chevrolet Volt — and the Volt's award-winning lithium-ion battery system.

Now GM is taking the Volt's electric drive upstream in the 2014 Cadillac ELR, while still boasting of the system's ability to ease an electric-car driver's "range anxiety."

The ELR, introduced Jan. 15 at the North American International Auto Show in Detroit, combines the plug-in electric drive battery system with a backup gasoline-powered generator, allowing car drivers to get up to 300 miles out of their cars.

ELR will use the same electric vehicle architecture as the Chevy Volt, including its 135 individual, prismatic, lithium-ion battery cells, in which each cell is housed inside an injection molded frame. Each battery pack uses 37 pounds of plastics.

As part of a Cadillac product, the architecture also will become part of a key marketing element by getting electric power into a new class of vehicles — luxury cars.

"We're bringing it to a whole new audience," said Hampden Tener, product director with Cadillac.

The Volt — like its European counterpart, the Opel Ampera — and competitors like Nissan's Leaf have been marketed as being commuter cars for families. The all-electric Tesla, meanwhile, is a sports car, although Tesla will bring out a sedan later this year.

The ELR brings all the traditional luxury car styling and details with leather seats, navigation systems, wood and carbon- fiber interior trim and LED headlights; but, the ELR also allows environmentally minded premium-car buyers to drive 35 miles solely on electric power. The on-board generator kicks in after that to power the batteries, bringing total mileage up to 300 miles.

"Part of the selling feature for Cadillac is that there are no compromises, and with the [electric architecture], there are no compromises on driving range either," Tener said.

GM has added regenerative braking to the ELR to help it cover the usage demands of the additional electronics on board a Cadillac.

The Volt power system has had its detractors, but GM sold more than 23,000 of them in 2012, up from 7,600 in 2011. By comparison, Corvette — GM's other low-volume, high-visibility vehicle — sold about 14,000 vehicles in 2012.

"Technology like this always has to build itself up first," said James Peterson, market development manager for polyurethane systems at BASF Corp. Florham Park, N.J.-based BASF supplies the nylon used by Mann + Hummel GmbH to mold the lithium-ion battery frames. "The challenge right now is to combine the technology at a price that justifies it."

Although Detroit-based GM has not announced a price yet for the ELR, which will go on sale in early 2014, the higher price point for a Cadillac compared to a Chevrolet should help with the production costs on the electric drivetrain.

More exposure for GM's powertrain system, along with plug-in and hybrid electric vehicles throughout the auto industry, will continue to build comfort for alternatives to traditional internal combustion engines, added Mark Minnichelli, director of technology and development for engineering plastics at BASF.


Comments

Cadillac boasts battery system

By Rhoda Miel
News Editor

Published: January 22, 2013 3:55 pm ET
Updated: January 22, 2013 4:16 pm ET

Post Your Comments


Back to story


More stories

Image

Coffee roaster looks to improve footprint of single cup systems

April 22, 2014 1:30 pm ET

One of the largest coffee and tea manufacturers in North America has introduced a single-serve beverage capsule intended to curb the waste created by ...    More

Auto supplier adds production space, jobs at plant in central Hungary

April 22, 2014 9:50 am ET

Automotive parts manufacturer Ábrahám Kft. has expanded its factory in Túrkéve, in central Hungary, with the launch of a new production hall as part...    More

Image

German electronics firm expanding in Hungary

April 22, 2014 9:46 am ET

German electronics manufacturer Provertha GmbH has announced plans to set up a new plastic galvanizing plant at the Kapuvár Industrial Park, in...    More

Image

Material Insights: Shell Chemical meets with residents

April 21, 2014 2:16 pm ET

Power outage at a PE plant and the return of a PVC feedstock plant after a fire on this week's Material Insights.    More

Image

Cambro investing $30.4 million in new N.C. injection molding plant

April 18, 2014 2:36 pm ET

Foodservice products manufacturer Cambro Manufacturing Co. Inc. plans to set up a satellite production and distribution operation in Mebane, N.C., to ...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook – North America

This in-depth report provides analysis and discussions of economic and political conditions, market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as strategies being implemented by thermoformed packaging companies. In addition, there are reviews of 25 leading thermoformers in the packaging segment, assessing their growth initiatives and performance metrics over 10 years.

Learn more

Automotive Market Review and Outlook 2014 – The Americas

This 75-page report features in-depth analysis of the automotive industry for the Americas. It includes discussions of market trends, legislative/regulatory activity impacting production and threats as well as design strategies being implemented by the major automakers. Detailed charts and data tables outline North American automotive production over the last five years.

Learn more

Plastics Building & Construction Market Review and Outlook 2014 with MS Excel chart data

This report provides in-depth analysis of the plastic building and construction market for North America, including discussions of trends, opportunities, threats and the latest developments in construction trends that impact plastics processors.

Learn more

Upcoming Plastics News Events

May 6, 2014 - May 8, 2014Plastics in Medical Devices 2014

May 12, 2014 - May 12, 2014Plastics News Brazil Pharma Summit

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 3, 2015 - February 7, 2015Plastics News Executive Forum 2015

More Events