Formosa fined nearly $1.5M for EPA violations

By Frank Esposito
Senior Staff Reporter

Published: January 22, 2013 2:47 pm ET
Updated: January 23, 2013 8:36 am ET

Related to this story

Topics Legal, Polyethylene, Polypropylene, PVC

POINT COMFORT, TEXAS -- Formosa Plastics Corp. USA has been fined almost $1.5 million by the U.S. Environmental Protection Agency for failing to install more than 8,000 pieces of leak detection and repair equipment at its plastics and chemicals plant in Point Comfort.

In a Jan. 3 filing in U.S. District Court in Victoria, Texas, government officials said that Formosa had violated terms of a February 2010 consent decree between the company and the EPA. The filing included a letter sent from the EPA to Formosa in March 2012 that said the firm "has failed to timely include" 8,191 components in the Point Comfort plant's leak detection and repair program.

The filing also included six letters sent from Livingston, N.J.-based Formosa to the EPA between August 2011 and April 2012 that confirmed the noncompliance.

In a Jan. 21 phone interview, Formosa spokesman Steve Rice said that the firm will pay the fine of $1,477,925. "Formosa has worked with the USA to resolve and correct this issue," he said. Formosa now is monitoring existing equipment that it was not monitoring before.

The original consent decree came about after Formosa was fined almost $3 million by the EPA in late 2009 for air, water and hazardous waste violations at its plants in Point Comfort and Baton Rouge, La. Company officials said at the time that Formosa would spend $10 million on pollution controls to address those violations.

Formosa's dispersion PVC resin plant in Delaware City, Del. Also has been fined twice in the last three years by the Occupational safety and Health Administration for safety and health violations. Most recently, that site was fined almost $150,000 in September 2012 for 16 violations.

Formosa's Point Comfort plant is a major producer of polyethylene, polypropylene, PVC and related feedstocks. In March 2012, Formosa announced plans for a $1.7 billion expansion at the site because of increased availability of low-cost natural gas in North America. That expansion would include a new low density PE plant with annual capacity of about 660 million pounds.


Comments

Formosa fined nearly $1.5M for EPA violations

By Frank Esposito
Senior Staff Reporter

Published: January 22, 2013 2:47 pm ET
Updated: January 23, 2013 8:36 am ET

Post Your Comments


Back to story


More stories

Image

PP prices rise, solid PS, PET drop

October 30, 2014 1:15 pm ET

North American polypropylene resin prices surged again in October, while regional prices for solid polystyrene and PET bottle resin continued their...    More

Image

Italian compounder opening first US plant

October 30, 2014 9:45 am ET

The song of the South has led Italian compounder So.F.Ter Group to open its first plant in the United States in Lebanon, Tenn.    More

Image

Ineos closing Barex plant, exiting business

October 29, 2014 3:58 pm ET

Materials maker Ineos Group is closing its only global Barex-brand polyacrylonitrile (PAN) resin plant in Lima, Ohio. Ineos – based in Rolle,...    More

Image

Compromise overdue for TSCA reform

October 29, 2014 9:04 am ET

The Toxic Substances Control Act, by all accounts, is not a good law. The members of Congress who voted it into existence knew at the time it wasn't...    More

Image

Shale development lagging in China

October 29, 2014 1:28 pm ET

Shale gas and its impact on China was the hot topic at the FlexPO conference, held Oct. 22-24 in Shanghai.    More

Market Reports

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events