Formosa fined nearly $1.5M for EPA violations

By Frank Esposito
Senior Staff Reporter

Published: January 22, 2013 2:47 pm ET
Updated: January 23, 2013 8:36 am ET

Related to this story

Topics Polyethylene, PVC, Legal, Polypropylene

POINT COMFORT, TEXAS -- Formosa Plastics Corp. USA has been fined almost $1.5 million by the U.S. Environmental Protection Agency for failing to install more than 8,000 pieces of leak detection and repair equipment at its plastics and chemicals plant in Point Comfort.

In a Jan. 3 filing in U.S. District Court in Victoria, Texas, government officials said that Formosa had violated terms of a February 2010 consent decree between the company and the EPA. The filing included a letter sent from the EPA to Formosa in March 2012 that said the firm "has failed to timely include" 8,191 components in the Point Comfort plant's leak detection and repair program.

The filing also included six letters sent from Livingston, N.J.-based Formosa to the EPA between August 2011 and April 2012 that confirmed the noncompliance.

In a Jan. 21 phone interview, Formosa spokesman Steve Rice said that the firm will pay the fine of $1,477,925. "Formosa has worked with the USA to resolve and correct this issue," he said. Formosa now is monitoring existing equipment that it was not monitoring before.

The original consent decree came about after Formosa was fined almost $3 million by the EPA in late 2009 for air, water and hazardous waste violations at its plants in Point Comfort and Baton Rouge, La. Company officials said at the time that Formosa would spend $10 million on pollution controls to address those violations.

Formosa's dispersion PVC resin plant in Delaware City, Del. Also has been fined twice in the last three years by the Occupational safety and Health Administration for safety and health violations. Most recently, that site was fined almost $150,000 in September 2012 for 16 violations.

Formosa's Point Comfort plant is a major producer of polyethylene, polypropylene, PVC and related feedstocks. In March 2012, Formosa announced plans for a $1.7 billion expansion at the site because of increased availability of low-cost natural gas in North America. That expansion would include a new low density PE plant with annual capacity of about 660 million pounds.


Comments

Formosa fined nearly $1.5M for EPA violations

By Frank Esposito
Senior Staff Reporter

Published: January 22, 2013 2:47 pm ET
Updated: January 23, 2013 8:36 am ET

Post Your Comments


Back to story


More stories

Image

EPA fines RI polymer company

August 29, 2014 1:20 pm ET

A Rhode Island polymer manufacturer has reached a $60,000 settlement with the U.S. Environmental Protection Agency (EPA) for violating federal clean...    More

Image

Tighter resin prices leading to price hike for PE film

August 29, 2014 11:13 am ET

One of North America's largest film makers is pushing through a polyethylene price increase due, in part, to the tight resin market.    More

Image

Chinese compounders seek market shares, often at the expense of margins

August 29, 2014 10:02 am ET

China's largest compounder, Kingfa Sci. & Tech. Co. Ltd., as well as its more automotive-focused counterparts Shanghai Pret Composites Co. Ltd. and...    More

Image

PP prices rise 5 cents

August 28, 2014 3:59 pm ET

After a one-month break, volatility has returned to the North American polypropylene resin market, with prices increasing by an average of 5 cents...    More

Image

DuPont fined for 2010 chemicals release

August 28, 2014 1:37 pm ET

DuPont Co. has been fined almost $1.3 million for the release of several chemicals — including plastics feedstock phosgene — at its plant ...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events