ZF eyes structural applications

By Rhoda Miel
News Editor

Published: January 24, 2013 4:21 pm ET
Updated: January 24, 2013 4:30 pm ET

Image By: Plastics News photo by Rhoda Miel ZF’s lightweight suspension strut wheel carrier uses a hybrid mix of materials, including plastics.

Related to this story

Topics Automotive, Sustainability

DETROIT — German automotive supplier ZF Friedrichhafen AG is known as a transmission specialist and a chassis supplier, with lots and lots of metals-intensive parts.

But the push for lower weight and improved fuel performance is changing that, and the company is increasingly investigating reinforced plastics for structural applications.

"Lightweighting is very important for us," CEO Stefan Summer said during a Jan. 15 press conference at the North American International Auto Show in Detroit. "We are developing not only new designs, but new materials like fiberglass materials and carbon materials."

In fact, plastics is not a completely new material for ZF. It already is producing brake pedal systems made of glass-reinforced thermoplastics, said Dieter Eulenbach, director of sales and engineering for ZF's suspension group in North America, based in Northville, Mich.

Brake pedals were the last pedal system to go to plastics, out of concerns about the pressure placed on them during emergency situations, but Eulenbach said they are only the beginning of what ZF is considering in both thermoset and thermoplastic composites.

One prototype under development at ZF is a long-glass-fiber-reinforced, transverse leaf spring within an axle system. The flexibility inherent within the plastics in the composite leaf spring would eliminate the need for metal coil springs, reducing complexity within the axle while also cutting weight by 12-15 percent, he said.

ZF said the plastic brake pedal system is half the weight of a steel system.

The axle is targeted for future large-volume vehicles.

ZF also is developing a lightweight suspension strut wheel carrier that would use a hybrid mix of materials, including plastics, which would be half the weight of a traditional steel and aluminum strut.

The system would place an all-plastic suspension part at the top of the wheel carrier and encase a steel piston rod within plastic on the lower half.

The finished part would consist of one part sent to automakers, rather than three, which reduces assembly time and costs as well.

"[Plastics] offers you a lot of interesting perspectives in your parts," Eulenbach said.

At this point, ZF is focused more on near production using glass-fiber reinforcement rather than carbon fiber, simply because the industry already has decades of studies available on how glass reinforcement will act in real-world conditions.

"We need to look at 10 years' worth of data, and that's simply not there yet for carbon," he said, although increased use of carbon fiber in the auto industry is making that information available quickly.


Comments

ZF eyes structural applications

By Rhoda Miel
News Editor

Published: January 24, 2013 4:21 pm ET
Updated: January 24, 2013 4:30 pm ET

Post Your Comments


Back to story


More stories

Image

Lubrizol buys Brazil-based coatings technology manufacturer

January 30, 2015 11:50 am ET

Specialty chemicals company Lubrizol Corp. of Wickliffe, Ohio, said it has acquired a Brazilian company that makes coatings technology for products...    More

Image

2014 sees modest sales increase, but profit decrease, for Dow Chemical

January 29, 2015 4:20 pm ET

UPDATED — Dow Chemical Co. delivered modest sales growth in 2014, but the firm's profit took a tumble.    More

Image

Report: Brands are falling short on packaging sustainability

January 29, 2015 5:19 pm ET

Packaging in general, and plastic packaging in particular, has a long way to go in terms of recycling, according to a pair of environmental groups.    More

Image

Resin prices continuing to tumble

January 29, 2015 2:24 pm ET

The ongoing slide in crude oil prices is taking commodity resin prices down as well.    More

Image

Lund adds to aftermarket auto products portfolio with buy of Bushwacker

January 29, 2015 2:49 pm ET

Lund International Inc. has expanded its portfolio of plastic aftermarket vehicle accessories by acquiring Bushwacker Inc.    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events