ZF eyes structural applications

By Rhoda Miel
News Editor

Published: January 24, 2013 4:21 pm ET
Updated: January 24, 2013 4:30 pm ET

Image By: Plastics News photo by Rhoda Miel ZF’s lightweight suspension strut wheel carrier uses a hybrid mix of materials, including plastics.

Related to this story

Topics Automotive, Sustainability

DETROIT — German automotive supplier ZF Friedrichhafen AG is known as a transmission specialist and a chassis supplier, with lots and lots of metals-intensive parts.

But the push for lower weight and improved fuel performance is changing that, and the company is increasingly investigating reinforced plastics for structural applications.

"Lightweighting is very important for us," CEO Stefan Summer said during a Jan. 15 press conference at the North American International Auto Show in Detroit. "We are developing not only new designs, but new materials like fiberglass materials and carbon materials."

In fact, plastics is not a completely new material for ZF. It already is producing brake pedal systems made of glass-reinforced thermoplastics, said Dieter Eulenbach, director of sales and engineering for ZF's suspension group in North America, based in Northville, Mich.

Brake pedals were the last pedal system to go to plastics, out of concerns about the pressure placed on them during emergency situations, but Eulenbach said they are only the beginning of what ZF is considering in both thermoset and thermoplastic composites.

One prototype under development at ZF is a long-glass-fiber-reinforced, transverse leaf spring within an axle system. The flexibility inherent within the plastics in the composite leaf spring would eliminate the need for metal coil springs, reducing complexity within the axle while also cutting weight by 12-15 percent, he said.

ZF said the plastic brake pedal system is half the weight of a steel system.

The axle is targeted for future large-volume vehicles.

ZF also is developing a lightweight suspension strut wheel carrier that would use a hybrid mix of materials, including plastics, which would be half the weight of a traditional steel and aluminum strut.

The system would place an all-plastic suspension part at the top of the wheel carrier and encase a steel piston rod within plastic on the lower half.

The finished part would consist of one part sent to automakers, rather than three, which reduces assembly time and costs as well.

"[Plastics] offers you a lot of interesting perspectives in your parts," Eulenbach said.

At this point, ZF is focused more on near production using glass-fiber reinforcement rather than carbon fiber, simply because the industry already has decades of studies available on how glass reinforcement will act in real-world conditions.

"We need to look at 10 years' worth of data, and that's simply not there yet for carbon," he said, although increased use of carbon fiber in the auto industry is making that information available quickly.


Comments

ZF eyes structural applications

By Rhoda Miel
News Editor

Published: January 24, 2013 4:21 pm ET
Updated: January 24, 2013 4:30 pm ET

Post Your Comments


Back to story


More stories

Image

Brown signs California's plastic bag ban into law

September 30, 2014 1:38 pm ET

Gov. Jerry Brown (D) made it official today: plastic bags are banned across the entire state of California.    More

Image

New Hexcel plant will supply carbon fiber for Airbus A350 XWB

September 30, 2014 2:43 pm ET

Hexcel Corp. is investing $250 million on a new carbon fiber plant in France, with part of the production going into the future Airbus SAS A350 XWB.    More

Image

LyondellBasell CEO Gallogly to retire

September 30, 2014 3:00 pm ET

James Gallogly, CEO of Houston-based polyolefins producer LyondellBasell Industries NV, on Sept. 29 announced plans to retire in 2015.    More

Image

Teens put a cap on watery ketchup

September 30, 2014 1:57 pm ET

Whether you spell it ketchup or catsup, use it on burgers or fries, or prefer Heinz or Hunt's, there is one universal problem for the ages: That...    More

Image

Ohio molder Denbro Plastics moves to new location

September 29, 2014 6:17 pm ET

Logo products injection molder Denbro Plastics Co. has moved to another plant within Toledo, Ohio, to streamline production and improve efficiency.    More

Market Reports

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our industry analysis highlights macro industry trends and micro trends faced by companies that do business in Mexico. The report also provides key industry statistics and forecasts to anticipate future industry expansion.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events