ZF eyes structural applications

By Rhoda Miel
News Editor

Published: January 24, 2013 4:21 pm ET
Updated: January 24, 2013 4:30 pm ET

Image By: Plastics News photo by Rhoda Miel ZF’s lightweight suspension strut wheel carrier uses a hybrid mix of materials, including plastics.

Related to this story

Topics Automotive Sustainability
Companies & Associations

DETROIT — German automotive supplier ZF Friedrichhafen AG is known as a transmission specialist and a chassis supplier, with lots and lots of metals-intensive parts.

But the push for lower weight and improved fuel performance is changing that, and the company is increasingly investigating reinforced plastics for structural applications.

"Lightweighting is very important for us," CEO Stefan Summer said during a Jan. 15 press conference at the North American International Auto Show in Detroit. "We are developing not only new designs, but new materials like fiberglass materials and carbon materials."

In fact, plastics is not a completely new material for ZF. It already is producing brake pedal systems made of glass-reinforced thermoplastics, said Dieter Eulenbach, director of sales and engineering for ZF's suspension group in North America, based in Northville, Mich.

Brake pedals were the last pedal system to go to plastics, out of concerns about the pressure placed on them during emergency situations, but Eulenbach said they are only the beginning of what ZF is considering in both thermoset and thermoplastic composites.

One prototype under development at ZF is a long-glass-fiber-reinforced, transverse leaf spring within an axle system. The flexibility inherent within the plastics in the composite leaf spring would eliminate the need for metal coil springs, reducing complexity within the axle while also cutting weight by 12-15 percent, he said.

ZF said the plastic brake pedal system is half the weight of a steel system.

The axle is targeted for future large-volume vehicles.

ZF also is developing a lightweight suspension strut wheel carrier that would use a hybrid mix of materials, including plastics, which would be half the weight of a traditional steel and aluminum strut.

The system would place an all-plastic suspension part at the top of the wheel carrier and encase a steel piston rod within plastic on the lower half.

The finished part would consist of one part sent to automakers, rather than three, which reduces assembly time and costs as well.

"[Plastics] offers you a lot of interesting perspectives in your parts," Eulenbach said.

At this point, ZF is focused more on near production using glass-fiber reinforcement rather than carbon fiber, simply because the industry already has decades of studies available on how glass reinforcement will act in real-world conditions.

"We need to look at 10 years' worth of data, and that's simply not there yet for carbon," he said, although increased use of carbon fiber in the auto industry is making that information available quickly.


Comments

ZF eyes structural applications

By Rhoda Miel
News Editor

Published: January 24, 2013 4:21 pm ET
Updated: January 24, 2013 4:30 pm ET

Post Your Comments


Back to story


More stories

Image

Ford moving forward in carbon fiber for 'high volume' use

April 17, 2015 10:21 am ET

Ford Motor Co. has signed a deal with a carbon-fiber manufacturer to jointly explore “high-volume” automotive uses for the lightweight...    More

Image

Plastics News Now: Musicians back recycled plastics

April 16, 2015 6:00 am ET

Pharrell Williams touts recycling plastics while will.i.am helps a major hotel chain turn to sheets made with recycled plastics. Also, the Seattle...    More

Image

A. Schulman, Citadel discuss the $800 million deal

April 15, 2015 1:45 pm ET

The $800 million match of materials maker A. Schulman Inc. and Citadel Plastics felt good from the start. “Everything in our first meetings...    More

Image

Keeping the NPE 2015 momentum moving forward

April 14, 2015 2:04 pm ET

Now that the parties are over, the booths are broken down and it's back to business as usual for three years, how can plastics keep that NPE 2015...    More

Image

Material Insights: Trade groups criticize rash of force majeure declarations

April 13, 2015 11:59 am ET

As supplies tighten in Europe, trade groups question force majeure declarations, and three firms announce global expansion plans.    More

Market Reports

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Upcoming Plastics News Events

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 15, 2015 - September 17, 2015Plastics Caps & Closures - September 2015

More Events