ZF eyes structural applications

By Rhoda Miel
News Editor

Published: January 24, 2013 4:21 pm ET
Updated: January 24, 2013 4:30 pm ET

Image By: Plastics News photo by Rhoda Miel ZF’s lightweight suspension strut wheel carrier uses a hybrid mix of materials, including plastics.

Related to this story

Topics Automotive, Sustainability

DETROIT — German automotive supplier ZF Friedrichhafen AG is known as a transmission specialist and a chassis supplier, with lots and lots of metals-intensive parts.

But the push for lower weight and improved fuel performance is changing that, and the company is increasingly investigating reinforced plastics for structural applications.

"Lightweighting is very important for us," CEO Stefan Summer said during a Jan. 15 press conference at the North American International Auto Show in Detroit. "We are developing not only new designs, but new materials like fiberglass materials and carbon materials."

In fact, plastics is not a completely new material for ZF. It already is producing brake pedal systems made of glass-reinforced thermoplastics, said Dieter Eulenbach, director of sales and engineering for ZF's suspension group in North America, based in Northville, Mich.

Brake pedals were the last pedal system to go to plastics, out of concerns about the pressure placed on them during emergency situations, but Eulenbach said they are only the beginning of what ZF is considering in both thermoset and thermoplastic composites.

One prototype under development at ZF is a long-glass-fiber-reinforced, transverse leaf spring within an axle system. The flexibility inherent within the plastics in the composite leaf spring would eliminate the need for metal coil springs, reducing complexity within the axle while also cutting weight by 12-15 percent, he said.

ZF said the plastic brake pedal system is half the weight of a steel system.

The axle is targeted for future large-volume vehicles.

ZF also is developing a lightweight suspension strut wheel carrier that would use a hybrid mix of materials, including plastics, which would be half the weight of a traditional steel and aluminum strut.

The system would place an all-plastic suspension part at the top of the wheel carrier and encase a steel piston rod within plastic on the lower half.

The finished part would consist of one part sent to automakers, rather than three, which reduces assembly time and costs as well.

"[Plastics] offers you a lot of interesting perspectives in your parts," Eulenbach said.

At this point, ZF is focused more on near production using glass-fiber reinforcement rather than carbon fiber, simply because the industry already has decades of studies available on how glass reinforcement will act in real-world conditions.

"We need to look at 10 years' worth of data, and that's simply not there yet for carbon," he said, although increased use of carbon fiber in the auto industry is making that information available quickly.


Comments

ZF eyes structural applications

By Rhoda Miel
News Editor

Published: January 24, 2013 4:21 pm ET
Updated: January 24, 2013 4:30 pm ET

Post Your Comments


Back to story


More stories

Image

Ferro sells another piece of its plastics business

December 19, 2014 3:33 pm ET

Ferro Corp. has sold its North American polymer additives business to a private equity firm for $154 million in cash.    More

Image

The return of HPM's big presses

December 19, 2014 11:47 am ET

HPM is back in big injection molding machines.    More

Image

Antimicrobial polymers firm TiFiber launching pilot production in Ark.

December 19, 2014 10:58 am ET

TiFiber Inc., which makes synthetic compounds to control dangerous microorganisms, will locate a pilot production facility and its future company...    More

Image

Patel named LyondellBasell CEO

December 19, 2014 9:56 am ET

Bhavesh V. “Bob” Patel has been named CEO of Houston-based polyolefins producer LyondellBasell Industries NV, effective Jan. 12.    More

Image

Momentive to get a new name in January

December 19, 2014 9:45 am ET

Momentive Specialty Chemicals Inc. will change its name to Hexion Inc., effective Jan. 15.    More

Market Reports

Flexible Packaging Trends in North America

Our latest RESEARCH report examines trends in FLEXIBLE PACKAGING impacting the North American market including a review of economic conditions, key drivers of growth, materials pricing, M&A activity, sustainability challenges and the outlook for 2015.

Learn more

Plastics in Brazil - State of the Industry Report

This in-depth report examines the Brazilian plastics industry from a historical and geographical context. Our analysts provide insight on economic trends and forecasts, growing manufacturing sectors that utilize plastics, private investment opportunities, market environment challenges, and innovations in R&D.

Data tables and charts on producer prices, trade, plastics production and end market indicators is also included.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events