BMW, Toyota team up again

By Rhoda Miel
News Editor

Published: January 24, 2013 3:09 pm ET
Updated: January 24, 2013 3:11 pm ET

Related to this story

Topics Automotive
Companies & Associations BMW AG, Toyota Motor Corp.

MUNICH, GERMANY -- Automakers Toyota Motor Corp. and BMW AG have agreed to combine forces to develop fuel-cell and lightweight-vehicle technologies for fuel-cell-powered cars.

In an agreement signed Jan. 24 in Munich, the companies said part of that co-development would focus on lightweight technologies for vehicle bodies, "using cutting-edge materials such as reinforced composites."

Those technologies could be used both on a jointly developed sports car or other BMW and Toyota cars.

Munich-based BMW has been in the forefront of developing carbon-fiber composites for the auto industry, with a proprietary process that will be used on its own i-series electric cars. The BMW i3 is slated to hit the market later this year, to be followed by the i8.

Toyota, based in Toyota City, Japan, has been in the lead of using fuel cells to power an electric drivetrain. It has test vehicles already on the road, and has announced plans to sell a fuel-cell sedan in limited markets in 2015. Fuel-cell stacks use a variety of thermoplastic and thermoset materials, including the film at the heart of every cell.

"[Toyota] and the BMW Group share the same strategic vision of future sustainable mobility," said Norbert Reithofer, chairman of the BMW board of management, in a press release. "In light of the technological changes ahead, the entire automotive industry faces tremendous challenges, which we also regard as an opportunity.

"This collaboration is an important building block in keeping both companies on a successful course in the future."

Toyota and BMW previously signed a memorandum of understanding to work together in other lightweight-vehicle developments. The new agreement takes the process further, covering four key development areas: fuel cells, a sports car platform, lightweight materials and "post lithium-ion battery" technology.

In fuel cells, the companies will take aim not only at a fuel-cell stack, but also a tank to hold hydrogen used to power those cells. They will jointly develop the codes and standards needed in a hydrogen infrastructure to place hydrogen fuel stations where needed.

A feasibility study will be conducted this year on a joint platform for a midsize sports vehicle, which will include the lightweight technologies and composites study.

In addition, the firms agreed to combine research on a future battery system called a "lithium air battery" that promises a higher energy density than current systems. A lithium air system uses a different chemistry than the mix in a lithium-ion battery, and also uses air from the surrounding environment.

"We are entering the phase [under the agreement] that promises the fruit," said Akio Toyoda, president of Toyota. "While placing importance on what we learn from the joint development, we will work hard together in reaching our common goal of making ever-better cars."


Comments

BMW, Toyota team up again

By Rhoda Miel
News Editor

Published: January 24, 2013 3:09 pm ET
Updated: January 24, 2013 3:11 pm ET

Post Your Comments


Back to story


More stories

PE suppliers go after oxo-biodegradable technology in Mexico

July 31, 2014 1:12 pm ET

Mexican industry defends itself, calling claims 'misleading'    More

Image

Coal-to-olefins may not be an immediate threat

July 31, 2014 10:56 am ET

China's coal-derived plastics are unlikely to form any substantial impact in the resin market in the near term, as new capacity projects are running...    More

Bioplastic created using rice starch

July 31, 2014 10:40 am ET

The new transparent, biodegradable material has a high degree of mechanical strength and good thermal resistance.    More

Private equity firm buys majority share of truck accessory maker

July 31, 2014 10:30 am ET

A majority share of Ann Arbor, Mich.-based truck accessory manufacturer Tectum Holdings Inc. has been acquired by Boston-based private equity firm TA ...    More

Image

Plastics News Now: PVC pipe used to help repel sharks from beaches

July 31, 2014 6:00 am ET

Also, we visit Nicolet Plastics which is using a unique employee structure, and Washington D.C. bans polystyrene.    More

Market Reports

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events