BMW, Toyota team up again

By Rhoda Miel
News Editor

Published: January 24, 2013 3:09 pm ET
Updated: January 24, 2013 3:11 pm ET

Related to this story

Topics Automotive
Companies & Associations BMW AG, Toyota Motor Corp.

MUNICH, GERMANY -- Automakers Toyota Motor Corp. and BMW AG have agreed to combine forces to develop fuel-cell and lightweight-vehicle technologies for fuel-cell-powered cars.

In an agreement signed Jan. 24 in Munich, the companies said part of that co-development would focus on lightweight technologies for vehicle bodies, "using cutting-edge materials such as reinforced composites."

Those technologies could be used both on a jointly developed sports car or other BMW and Toyota cars.

Munich-based BMW has been in the forefront of developing carbon-fiber composites for the auto industry, with a proprietary process that will be used on its own i-series electric cars. The BMW i3 is slated to hit the market later this year, to be followed by the i8.

Toyota, based in Toyota City, Japan, has been in the lead of using fuel cells to power an electric drivetrain. It has test vehicles already on the road, and has announced plans to sell a fuel-cell sedan in limited markets in 2015. Fuel-cell stacks use a variety of thermoplastic and thermoset materials, including the film at the heart of every cell.

"[Toyota] and the BMW Group share the same strategic vision of future sustainable mobility," said Norbert Reithofer, chairman of the BMW board of management, in a press release. "In light of the technological changes ahead, the entire automotive industry faces tremendous challenges, which we also regard as an opportunity.

"This collaboration is an important building block in keeping both companies on a successful course in the future."

Toyota and BMW previously signed a memorandum of understanding to work together in other lightweight-vehicle developments. The new agreement takes the process further, covering four key development areas: fuel cells, a sports car platform, lightweight materials and "post lithium-ion battery" technology.

In fuel cells, the companies will take aim not only at a fuel-cell stack, but also a tank to hold hydrogen used to power those cells. They will jointly develop the codes and standards needed in a hydrogen infrastructure to place hydrogen fuel stations where needed.

A feasibility study will be conducted this year on a joint platform for a midsize sports vehicle, which will include the lightweight technologies and composites study.

In addition, the firms agreed to combine research on a future battery system called a "lithium air battery" that promises a higher energy density than current systems. A lithium air system uses a different chemistry than the mix in a lithium-ion battery, and also uses air from the surrounding environment.

"We are entering the phase [under the agreement] that promises the fruit," said Akio Toyoda, president of Toyota. "While placing importance on what we learn from the joint development, we will work hard together in reaching our common goal of making ever-better cars."


Comments

BMW, Toyota team up again

By Rhoda Miel
News Editor

Published: January 24, 2013 3:09 pm ET
Updated: January 24, 2013 3:11 pm ET

Post Your Comments


Back to story


More stories

Image

2014 leaves some resin firms in the black while others struggle

January 23, 2015 2:37 pm ET

On the financial side, 2014 was good for Hexcel Corp., so-so for Celanese Corp. and it could have been better for Omnova Solutions.    More

Image

Clariant's ColorForward predicts future consumer trends

January 23, 2015 1:33 pm ET

Clariant International Ltd. is marking a decade of color forecasting with the 10th edition of its ColorForward program.    More

Image

The future for PolyOne is colorful

January 23, 2015 1:28 pm ET

PolyOne Corp. is writing four color stories for 2016.    More

Image

Mexico's Polymer Solutions looks to grow, expand offerings with name change

January 23, 2015 12:03 pm ET

British biodegradable additives developer Symphony Environmental Technologies plc's Mexico distributor has changed its name from Plásticos...    More

Image

Gurit wins carbon fiber auto contract using new processing technology

January 23, 2015 9:22 am ET

Switzerland-based composite materials group Gurit Holding AG has been selected as the supplier for carbon fiber based automotive body panels at a valu...    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events