JCI taps next-generation interiors

By Rhoda Miel
News Editor

Published: January 25, 2013 2:26 pm ET
Updated: January 25, 2013 3:13 pm ET

Image By: Johnson Controls Inc. photo The Bespoke interior showcases JCI's vision for integrating electronics, interiors and seating.

Related to this story

Topics Automotive, Injection Molding, Automotive parts, Automotive/transportation, Compression molds

DETROIT — Johnson Controls Inc. is looking across a variety of plastics production capabilities and new ways to combine them for the next generation of auto interiors.

With its Compression Hybrid Molding process technology — or CHyM, pronounced "chime" — the auto supplier would combine the best of compression molding of natural-filled composites with injection molding. The resulting part could reduce a door panel's weight by 40 percent, the company said in its Jan. 14 debut of the technology and other concepts at the North American International Auto Show in Detroit.

JCI also is looking at ways to use plastics for structural seat components and seeking to use in-mold film technology to provide a lightweight alternative to interior electronic displays.

"What used to be simple plastic surfaces now can become electronic carrying areas," said Han Hendricks, vice president of advanced product development for JCI's automotive electronics and interiors group.

Hendricks and his team are at the heart of a move within Johnson Controls to push forward new technology and products in its global automotive group. The firm — with automotive headquarters in Plymouth, Mich., and design and development centers in Holland, Mich.; Burscheid, Germany; and Shanghai — sees the group as a way to get new products on the market faster, said William Jackson, corporate vice president and president of the electronics, interiors, operations and innovations unit.

"We have 66 projects going on right now in different levels of maturity," Jackson said. "It takes everything in product development, from creating new technology to what we call commercialization to phase zero, when we start to sell it to the [automaker]."

Many parts of that development phase were on display for JCI in its Bespoke interior concept introduced at the show, held Jan. 14-27.

Electronics are integrated into the instrument panel. Compression molding and injection molding are combined in a center console in a process that also allows the company to place a removable, U-shaped "catch bin" around the console for pens, sunglasses, keys and other small items that might otherwise slip between the seat and console.

The CHyM process and use of a suspended fabric cover allow the door panel to fit flush against the instrument panel when the door is closed, rather than requiring a 6- to 8- millimeter gap between the parts.

"Currently the way we [make natural-fiber door panel substrates] is that we make a fiber mat, then we compression mold it, then trim it and then back-injection mold it," Jackson said. "[With CHyM] technology, we roll form the mat, then heat it up. The injection molding machine does the compression molding for us.

"It's a very cool technology, and furthermore we've eliminated a lot of the trimming, and it reduces a lot of weight. Seven pounds is a lot of weight."

The system takes advantage of the weight savings of natural-fiber composites, but also has the rigidity of injection molding where that is needed.

The panel can also be wrapped in traditional cover skins and undergo the same post-processing techniques as a traditionally produced door, he said.

Natural fiber composites — either thermoplastic or thermoset — could also be used in a plastic seat frame JCI is developing to replace current steel systems. The company has used plastic composites on rear seats, but now is looking at opportunities for front seats, said Jeff Lindberg, senior manager of the global product center-complete seats.


Comments

JCI taps next-generation interiors

By Rhoda Miel
News Editor

Published: January 25, 2013 2:26 pm ET
Updated: January 25, 2013 3:13 pm ET

Post Your Comments


Back to story


More stories

Sumitomo Bakelite buying injection molder Vaupell Holdings

April 24, 2014 7:37 pm ET

Private equity firm H.I.G. Capital LLC of Miami has entered into a definitive agreement to sell plastics processor Vaupell Holdings Inc. to Sumitomo...    More

Image

Chicago City Council committee approves plastic bag ban

April 24, 2014 7:11 pm ET

Chicago is poised to become the next major U.S. city to enact a ban on single-use plastic bags after a City Council committee vote on April 24.    More

Image

Plastics News Now: Simpsons go Lego, Pharrell Williams gets into recycled plastic

April 24, 2014 8:45 am ET

Lego has teamed up with "The Simpsons" for a special episode, we see the trends at the International Home + Housewares Show and musician Pharrell...    More

Zimmer buying Biomet in $13 billion deal

April 24, 2014 4:25 pm ET

Orthopedic device giant Zimmer Holdings Inc. is buying rival Biomet Inc. in a $13.35 billion cash and stock deal, the companies announced April 24.    More

Image

PolyOne says new Shanghai center will ease collaboration across segments

April 24, 2014 2:34 pm ET

PolyOne Specialty Engineered Materials is opening an innovation Center in Shanghai's Jinqiao development zone that will serve as its new Asia Pacific ...    More

Market Reports

Market Data Book - Rankings & Lists

A one-stop download of Plastic News' exclusive annual lists and processor rankings containing essential data including sales, employees, end markets, materials and more.
EXCLUSIVE EXCEL FEATURE: full mailing address details for available plant locations.

Learn more

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report provides analysis and discussions of economic and political conditions, market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as strategies being implemented by thermoformed packaging companies. In addition, there are reviews of 25 leading thermoformers in the packaging segment, assessing their growth initiatives and performance metrics over 10 years.

Learn more

Mold Making and Tooling Review and Outlook 2014 North America

This report provides in-depth analysis of the mold and toolmaking market for North America, including discussions of trends, opportunities, threats, the latest developments in production and labor and equipment trends impacting moldmakers.

Learn more

Upcoming Plastics News Events

May 6, 2014 - May 8, 2014Plastics in Medical Devices 2014

May 12, 2014 - May 12, 2014Plastics News Brazil Pharma Summit

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 3, 2015 - February 7, 2015Plastics News Executive Forum 2015

More Events