JCI taps next-generation interiors

By Rhoda Miel
News Editor

Published: January 25, 2013 2:26 pm ET
Updated: January 25, 2013 3:13 pm ET

Image By: Johnson Controls Inc. photo The Bespoke interior showcases JCI's vision for integrating electronics, interiors and seating.

Related to this story

Topics Automotive, Injection Molding, Automotive parts, Automotive/transportation, Compression molds

DETROIT — Johnson Controls Inc. is looking across a variety of plastics production capabilities and new ways to combine them for the next generation of auto interiors.

With its Compression Hybrid Molding process technology — or CHyM, pronounced "chime" — the auto supplier would combine the best of compression molding of natural-filled composites with injection molding. The resulting part could reduce a door panel's weight by 40 percent, the company said in its Jan. 14 debut of the technology and other concepts at the North American International Auto Show in Detroit.

JCI also is looking at ways to use plastics for structural seat components and seeking to use in-mold film technology to provide a lightweight alternative to interior electronic displays.

"What used to be simple plastic surfaces now can become electronic carrying areas," said Han Hendricks, vice president of advanced product development for JCI's automotive electronics and interiors group.

Hendricks and his team are at the heart of a move within Johnson Controls to push forward new technology and products in its global automotive group. The firm — with automotive headquarters in Plymouth, Mich., and design and development centers in Holland, Mich.; Burscheid, Germany; and Shanghai — sees the group as a way to get new products on the market faster, said William Jackson, corporate vice president and president of the electronics, interiors, operations and innovations unit.

"We have 66 projects going on right now in different levels of maturity," Jackson said. "It takes everything in product development, from creating new technology to what we call commercialization to phase zero, when we start to sell it to the [automaker]."

Many parts of that development phase were on display for JCI in its Bespoke interior concept introduced at the show, held Jan. 14-27.

Electronics are integrated into the instrument panel. Compression molding and injection molding are combined in a center console in a process that also allows the company to place a removable, U-shaped "catch bin" around the console for pens, sunglasses, keys and other small items that might otherwise slip between the seat and console.

The CHyM process and use of a suspended fabric cover allow the door panel to fit flush against the instrument panel when the door is closed, rather than requiring a 6- to 8- millimeter gap between the parts.

"Currently the way we [make natural-fiber door panel substrates] is that we make a fiber mat, then we compression mold it, then trim it and then back-injection mold it," Jackson said. "[With CHyM] technology, we roll form the mat, then heat it up. The injection molding machine does the compression molding for us.

"It's a very cool technology, and furthermore we've eliminated a lot of the trimming, and it reduces a lot of weight. Seven pounds is a lot of weight."

The system takes advantage of the weight savings of natural-fiber composites, but also has the rigidity of injection molding where that is needed.

The panel can also be wrapped in traditional cover skins and undergo the same post-processing techniques as a traditionally produced door, he said.

Natural fiber composites — either thermoplastic or thermoset — could also be used in a plastic seat frame JCI is developing to replace current steel systems. The company has used plastic composites on rear seats, but now is looking at opportunities for front seats, said Jeff Lindberg, senior manager of the global product center-complete seats.


Comments

JCI taps next-generation interiors

By Rhoda Miel
News Editor

Published: January 25, 2013 2:26 pm ET
Updated: January 25, 2013 3:13 pm ET

Post Your Comments


Back to story


More stories

Image

Bankruptcy court confirms GSE reorganization plan

July 29, 2014 4:01 pm ET

The U.S. Bankruptcy Court in Wilmington, Del., has confirmed the reorganization plan for geomembranes maker GSE Environmental Inc.    More

Image

Vinyl siding's lead slips, but industry pushing back

July 29, 2014 2:04 pm ET

Vinyl siding continues to be the top cladding choice for home builders and remodelers but fiber cement is gaining ground — at an alarming rate...    More

Unipex Group buys Ferguson Chemical Innovation

July 29, 2014 1:57 pm ET

Chemical distributor Unipex Group Inc. announced July 29 that it had purchased Ferguson Chemical Innovation, a Brampton, Ontario-based supplier of...    More

Image

Magna expanding interiors site in Slovakia

July 29, 2014 1:47 pm ET

Magna International Inc. plans to nearly double the size of its manufacturing facility in Trnava, in western Slovakia, to accommodate new automotive...    More

Image

Obituary: Andrew 'A.J.' Janosko

July 29, 2014 12:14 pm ET

WASHINGTON — Andrew “A.J.” Janosko, the former director of trade show operations for the Society of Plastics Industry Inc., died on ...    More

Market Reports

Plastics Recyclers Data Report & Directory

This exclusive MS Excel database contains all the companies from Plastics News' ranking of top North American Recyclers and Brokers by reprocessed volume and also includes a directory with materials processes, services offered and company contact information. Data is based on primary research by PN editorial staff.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events