JCI taps next-generation interiors

By Rhoda Miel
News Editor

Published: January 25, 2013 2:26 pm ET
Updated: January 25, 2013 3:13 pm ET

Image By: Johnson Controls Inc. photo The Bespoke interior showcases JCI's vision for integrating electronics, interiors and seating.

Related to this story

Topics Automotive Automotive parts Automotive/transportation Compression molds Injection Molding
Companies & Associations

DETROIT — Johnson Controls Inc. is looking across a variety of plastics production capabilities and new ways to combine them for the next generation of auto interiors.

With its Compression Hybrid Molding process technology — or CHyM, pronounced "chime" — the auto supplier would combine the best of compression molding of natural-filled composites with injection molding. The resulting part could reduce a door panel's weight by 40 percent, the company said in its Jan. 14 debut of the technology and other concepts at the North American International Auto Show in Detroit.

JCI also is looking at ways to use plastics for structural seat components and seeking to use in-mold film technology to provide a lightweight alternative to interior electronic displays.

"What used to be simple plastic surfaces now can become electronic carrying areas," said Han Hendricks, vice president of advanced product development for JCI's automotive electronics and interiors group.

Hendricks and his team are at the heart of a move within Johnson Controls to push forward new technology and products in its global automotive group. The firm — with automotive headquarters in Plymouth, Mich., and design and development centers in Holland, Mich.; Burscheid, Germany; and Shanghai — sees the group as a way to get new products on the market faster, said William Jackson, corporate vice president and president of the electronics, interiors, operations and innovations unit.

"We have 66 projects going on right now in different levels of maturity," Jackson said. "It takes everything in product development, from creating new technology to what we call commercialization to phase zero, when we start to sell it to the [automaker]."

Many parts of that development phase were on display for JCI in its Bespoke interior concept introduced at the show, held Jan. 14-27.

Electronics are integrated into the instrument panel. Compression molding and injection molding are combined in a center console in a process that also allows the company to place a removable, U-shaped "catch bin" around the console for pens, sunglasses, keys and other small items that might otherwise slip between the seat and console.

The CHyM process and use of a suspended fabric cover allow the door panel to fit flush against the instrument panel when the door is closed, rather than requiring a 6- to 8- millimeter gap between the parts.

"Currently the way we [make natural-fiber door panel substrates] is that we make a fiber mat, then we compression mold it, then trim it and then back-injection mold it," Jackson said. "[With CHyM] technology, we roll form the mat, then heat it up. The injection molding machine does the compression molding for us.

"It's a very cool technology, and furthermore we've eliminated a lot of the trimming, and it reduces a lot of weight. Seven pounds is a lot of weight."

The system takes advantage of the weight savings of natural-fiber composites, but also has the rigidity of injection molding where that is needed.

The panel can also be wrapped in traditional cover skins and undergo the same post-processing techniques as a traditionally produced door, he said.

Natural fiber composites — either thermoplastic or thermoset — could also be used in a plastic seat frame JCI is developing to replace current steel systems. The company has used plastic composites on rear seats, but now is looking at opportunities for front seats, said Jeff Lindberg, senior manager of the global product center-complete seats.


Comments

JCI taps next-generation interiors

By Rhoda Miel
News Editor

Published: January 25, 2013 2:26 pm ET
Updated: January 25, 2013 3:13 pm ET

Post Your Comments


Back to story


More stories

Image

Ford moving forward in carbon fiber for 'high volume' use

April 17, 2015 10:21 am ET

Ford Motor Co. has signed a deal with a carbon-fiber manufacturer to jointly explore “high-volume” automotive uses for the lightweight...    More

Image

Plastics News Now: Musicians back recycled plastics

April 16, 2015 6:00 am ET

Pharrell Williams touts recycling plastics while will.i.am helps a major hotel chain turn to sheets made with recycled plastics. Also, the Seattle...    More

Image

A. Schulman, Citadel discuss the $800 million deal

April 15, 2015 1:45 pm ET

The $800 million match of materials maker A. Schulman Inc. and Citadel Plastics felt good from the start. “Everything in our first meetings...    More

Image

Keeping the NPE 2015 momentum moving forward

April 14, 2015 2:04 pm ET

Now that the parties are over, the booths are broken down and it's back to business as usual for three years, how can plastics keep that NPE 2015...    More

Image

Material Insights: Trade groups criticize rash of force majeure declarations

April 13, 2015 11:59 am ET

As supplies tighten in Europe, trade groups question force majeure declarations, and three firms announce global expansion plans.    More

Market Reports

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Upcoming Plastics News Events

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 15, 2015 - September 17, 2015Plastics Caps & Closures - September 2015

More Events