JCI taps next-generation interiors

By Rhoda Miel
News Editor

Published: January 25, 2013 2:26 pm ET
Updated: January 25, 2013 3:13 pm ET

Image By: Johnson Controls Inc. photo The Bespoke interior showcases JCI's vision for integrating electronics, interiors and seating.

Related to this story

Topics Automotive, Automotive parts, Automotive/transportation, Compression molds, Injection Molding

DETROIT — Johnson Controls Inc. is looking across a variety of plastics production capabilities and new ways to combine them for the next generation of auto interiors.

With its Compression Hybrid Molding process technology — or CHyM, pronounced "chime" — the auto supplier would combine the best of compression molding of natural-filled composites with injection molding. The resulting part could reduce a door panel's weight by 40 percent, the company said in its Jan. 14 debut of the technology and other concepts at the North American International Auto Show in Detroit.

JCI also is looking at ways to use plastics for structural seat components and seeking to use in-mold film technology to provide a lightweight alternative to interior electronic displays.

"What used to be simple plastic surfaces now can become electronic carrying areas," said Han Hendricks, vice president of advanced product development for JCI's automotive electronics and interiors group.

Hendricks and his team are at the heart of a move within Johnson Controls to push forward new technology and products in its global automotive group. The firm — with automotive headquarters in Plymouth, Mich., and design and development centers in Holland, Mich.; Burscheid, Germany; and Shanghai — sees the group as a way to get new products on the market faster, said William Jackson, corporate vice president and president of the electronics, interiors, operations and innovations unit.

"We have 66 projects going on right now in different levels of maturity," Jackson said. "It takes everything in product development, from creating new technology to what we call commercialization to phase zero, when we start to sell it to the [automaker]."

Many parts of that development phase were on display for JCI in its Bespoke interior concept introduced at the show, held Jan. 14-27.

Electronics are integrated into the instrument panel. Compression molding and injection molding are combined in a center console in a process that also allows the company to place a removable, U-shaped "catch bin" around the console for pens, sunglasses, keys and other small items that might otherwise slip between the seat and console.

The CHyM process and use of a suspended fabric cover allow the door panel to fit flush against the instrument panel when the door is closed, rather than requiring a 6- to 8- millimeter gap between the parts.

"Currently the way we [make natural-fiber door panel substrates] is that we make a fiber mat, then we compression mold it, then trim it and then back-injection mold it," Jackson said. "[With CHyM] technology, we roll form the mat, then heat it up. The injection molding machine does the compression molding for us.

"It's a very cool technology, and furthermore we've eliminated a lot of the trimming, and it reduces a lot of weight. Seven pounds is a lot of weight."

The system takes advantage of the weight savings of natural-fiber composites, but also has the rigidity of injection molding where that is needed.

The panel can also be wrapped in traditional cover skins and undergo the same post-processing techniques as a traditionally produced door, he said.

Natural fiber composites — either thermoplastic or thermoset — could also be used in a plastic seat frame JCI is developing to replace current steel systems. The company has used plastic composites on rear seats, but now is looking at opportunities for front seats, said Jeff Lindberg, senior manager of the global product center-complete seats.


Comments

JCI taps next-generation interiors

By Rhoda Miel
News Editor

Published: January 25, 2013 2:26 pm ET
Updated: January 25, 2013 3:13 pm ET

Post Your Comments


Back to story


More stories

Image

Cascade Engineering founder Keller to step down as CEO

September 16, 2014 8:33 pm ET

Cascade Engineering Inc. is undergoing a transition as President Mark Miller will also add the role of CEO, replacing founder Fred Keller, who has...    More

Image

DuPont investing $100 million for more ethylene copolymer capacity

September 16, 2014 1:51 pm ET

Increased packaging demand is leading materials giant DuPont Co. to spend more than $100 million to increase capacity for ethylene copolymers at its...    More

Image

Heineken swapping out plastic for wood for its pallets in Mexico

September 16, 2014 4:35 pm ET

Dutch brewer Heineken NV is to replace all its wooden pallets in Mexico with a high impact-resistant plastic pallet, co-designed and produced by...    More

Image

SPE Thermoforming Division picks 3 scholarship winners

September 16, 2014 4:25 pm ET

Three college students have earned scholarships through the Society of Plastics Engineers' Thermoforming Division, division officials announced at...    More

Image

Canadian, Mexican injection molders form auto supply joint venture

September 16, 2014 2:26 pm ET

A new automotive parts manufacturer will open in Querétaro, Mexico, through a joint venture between Canadian automotive supplier Papp Plastics and Dis...    More

Market Reports

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Thermoformed Packaging 2014 Market Review & Outlook – North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events