JCI taps next-generation interiors

By Rhoda Miel
News Editor

Published: January 25, 2013 2:26 pm ET
Updated: January 25, 2013 3:13 pm ET

Image By: Johnson Controls Inc. photo The Bespoke interior showcases JCI's vision for integrating electronics, interiors and seating.

Related to this story

Topics Automotive, Injection Molding, Automotive parts, Automotive/transportation, Compression molds

DETROIT — Johnson Controls Inc. is looking across a variety of plastics production capabilities and new ways to combine them for the next generation of auto interiors.

With its Compression Hybrid Molding process technology — or CHyM, pronounced "chime" — the auto supplier would combine the best of compression molding of natural-filled composites with injection molding. The resulting part could reduce a door panel's weight by 40 percent, the company said in its Jan. 14 debut of the technology and other concepts at the North American International Auto Show in Detroit.

JCI also is looking at ways to use plastics for structural seat components and seeking to use in-mold film technology to provide a lightweight alternative to interior electronic displays.

"What used to be simple plastic surfaces now can become electronic carrying areas," said Han Hendricks, vice president of advanced product development for JCI's automotive electronics and interiors group.

Hendricks and his team are at the heart of a move within Johnson Controls to push forward new technology and products in its global automotive group. The firm — with automotive headquarters in Plymouth, Mich., and design and development centers in Holland, Mich.; Burscheid, Germany; and Shanghai — sees the group as a way to get new products on the market faster, said William Jackson, corporate vice president and president of the electronics, interiors, operations and innovations unit.

"We have 66 projects going on right now in different levels of maturity," Jackson said. "It takes everything in product development, from creating new technology to what we call commercialization to phase zero, when we start to sell it to the [automaker]."

Many parts of that development phase were on display for JCI in its Bespoke interior concept introduced at the show, held Jan. 14-27.

Electronics are integrated into the instrument panel. Compression molding and injection molding are combined in a center console in a process that also allows the company to place a removable, U-shaped "catch bin" around the console for pens, sunglasses, keys and other small items that might otherwise slip between the seat and console.

The CHyM process and use of a suspended fabric cover allow the door panel to fit flush against the instrument panel when the door is closed, rather than requiring a 6- to 8- millimeter gap between the parts.

"Currently the way we [make natural-fiber door panel substrates] is that we make a fiber mat, then we compression mold it, then trim it and then back-injection mold it," Jackson said. "[With CHyM] technology, we roll form the mat, then heat it up. The injection molding machine does the compression molding for us.

"It's a very cool technology, and furthermore we've eliminated a lot of the trimming, and it reduces a lot of weight. Seven pounds is a lot of weight."

The system takes advantage of the weight savings of natural-fiber composites, but also has the rigidity of injection molding where that is needed.

The panel can also be wrapped in traditional cover skins and undergo the same post-processing techniques as a traditionally produced door, he said.

Natural fiber composites — either thermoplastic or thermoset — could also be used in a plastic seat frame JCI is developing to replace current steel systems. The company has used plastic composites on rear seats, but now is looking at opportunities for front seats, said Jeff Lindberg, senior manager of the global product center-complete seats.


Comments

JCI taps next-generation interiors

By Rhoda Miel
News Editor

Published: January 25, 2013 2:26 pm ET
Updated: January 25, 2013 3:13 pm ET

Post Your Comments


Back to story


More stories

Image

New medical firm buys Clairson Plastics

September 19, 2014 4:33 pm ET

Custom injection molder Clairson Plastics is being sold to a new start-up that plans to dive into the medical market with a new dialyzer, a key...    More

Image

Dunkin' Donuts looking at PP to replace foam cups

September 19, 2014 3:22 pm ET

Dunkin' Donuts is testing a new polypropylene coffee cup that the company believes could help boost recycling.    More

Image

Plasan investing in capacity, jobs to supply auto market with carbon fiber

September 19, 2014 3:05 pm ET

Growth in the emerging automotive market for carbon-fiber composites has spurred a $29 million investment in a Walker, Mich., factory    More

Image

Hong Kong's TK eyes expansion, may buy Nypro Tool operation

September 19, 2014 2:49 pm ET

Hong Kong-based mold maker and plastics processor TK Group (Holdings) Ltd. said it's reached a tentative agreement to buy a tooling factory in...    More

Image

Toyoda Gosei expanding in Mexico

September 19, 2014 2:33 pm ET

Toyoda Gosei North America Corp. is investing $67 million in a 398,000-square-foot plant in central Mexico to supply the automotive industry with plas...    More

Market Reports

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Thermoformed Packaging 2014 Market Review & Outlook – North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events