Eulogy for Jerry: Plastics leader, advocate, enthusiast

By Don Loepp
Editor

Published: January 25, 2013 2:07 pm ET
Updated: January 25, 2013 3:35 pm ET

Jerry Heckman eulogy

Image By: Rich Williams

Related to this story

Topics Legal, Government & Legislation, Obituaries, Plastics Hall of Fame
Companies & Associations American Plastics Council, Society of the Plastics Industry Inc., American Chemistry Council, American Plastics Council (APC)

Jerry Heckman had been a key leader in the plastics industry for nearly 60 years — quite an accomplishment for someone who, as his Plastics Hall of Fame profile notes, "never invented a plastic product or application."

The truth is that Jerry was a lawyer — an extraordinary lawyer, to be sure. But he identified with, and embraced, the plastics industry, and all the people and companies out there creating new products and applications. And he did so with tremendous enthusiasm.

Jerry died Jan. 21 at age 85. Since he was so well-known in some corners of the industry — especially with some of our "senior" readers, and those active in the trade associations — I thought it would be nice to share some of my own recollections.

Heckman's relationship with the plastics industry dates back to 1954, when he was just a year out of Georgetown law school and he met Bill Cruse, known as "Mr. Plastics," who was then the first first full-time CEO for the Society of the Plastics Industry Inc.

Of course my own relationship with Jerry doesn't go back nearly that long. I started at Plastics News in 1991, and he was one of the first people I met who was part of the plastics industry. I visited Washington to say hello to all the trade association bigwigs — it was my first trip for PN.

Adam Lashinsky, then our Washington bureau chief (and now an award-winning writer for Fortune magazine) arranged for a sit-down with Jerry. By that point Jerry was already in the Plastics Hall of Fame, and he knew all the major players in the industry. Jerry surprised me right away when he talked candidly about the personalities who were leading the industry's key companies and trade associations. I remember walking out the door of Jerry's office and sharing a smile with Adam.

Jerry started to call me regularly when I began to write most of the newspaper's weekly editorial columns. He offered historical perspective on just about any issue. Do you think plastic product bans are a new phenomenon? Jerry had been dealing with them since the 1950s. Chemical safety? He was recognized internationally as an expert.

Jerry wrote many columns over the years praising our coverage. He didn't like everything, though. He made it

clear to me when he didn't like a story, or an editorial, or even one of our reporters. I imagine that he treated others in the industry the same way. But it didn't bother me. Perhaps it was the way he offered criticism, which most of the time seemed fair. Jerry understood how newspapers worked — a point he repeated more than once.

A while back, when SPI and the American Plastics Council were feuding over a variety of issues, Jerry tried to help mend fences. It took years for that situation to improve, but I'm sure he took some comfort in the fact that the industry is more united today than it has been in at least 20 years.

Let's leave the last word for that Hall of Fame profile — the one noting that Heckman never invented a plastic product or application.

The rest of the sentence really sums it up: "... he has certainly been as creative as any inventor in his work in building and maintaining a business environment that has permitted the stupendous growth achieved by the industry."

Don Loepp is editor of Plastics News and author of "The Plastics Blog."


Comments

Eulogy for Jerry: Plastics leader, advocate, enthusiast

By Don Loepp
Editor

Published: January 25, 2013 2:07 pm ET
Updated: January 25, 2013 3:35 pm ET

Post Your Comments


Back to story


More stories

Image

Ohio molder sold to private equity firm

August 19, 2014 5:23 pm ET

Private equity firm TVV Capital of Nashville has acquired injection molder Design Molded Plastics Inc. for an undisclosed price.    More

Image

Pactiv selling building products unit to Ireland's Kingspan

August 19, 2014 3:54 pm ET

Irish building material manufacturer Kingspan Group plc is acquiring the insulation business of Lake Forest, Ill.-based Pactiv Building Products for...    More

Image

Flexible film waste-to-oil pilot project continuing in California

August 19, 2014 3:19 pm ET

A recent decision to discontinue operations at a plastics waste-to-oil site in Portland, Ore., is not impacting a pilot program aimed at hard-to-...    More

Image

Germany's Bolta building $50 million plating plant in Alabama

August 19, 2014 2:21 pm ET

A German company is setting up a plastics chrome plating plant in Tuscaloosa, Ala.    More

Image

Soaring business leads to growth for Composites Horizons

August 19, 2014 1:56 pm ET

Composites Horizons LLC is investing $12 million in new equipment and processes, in part for ceramic matrix composite production in its fourth buildin...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events