Two workers hurt in explosion at Ivex foam plant

By Frank Esposito
Senior Staff Reporter

Published: January 28, 2013 1:24 pm ET
Updated: January 28, 2013 5:36 pm ET

Related to this story

Topics Food packaging Packaging Polystyrene Film & Sheet
Companies & Associations

SIDNEY, OHIO -- Two workers were injured Jan. 25 in an explosion and fire at a plastic foam plant operated by Ivex Protective Packaging Inc. in Sidney, Ohio.

The two workers were treated for minor burns and released from an area hospital, Sidney Fire Department Assistant Fire Chief Cameron Haller said. Only four employees were in the plant when the explosion took place shortly before 11 p.m., Haller added in a Jan. 28 phone interview.

The cause of the explosion is under investigation, and the plant remained out of operation on Jan. 28. Officials with Ivex in Sidney and at the firm's headquarters in Lachine, Quebec, announced Jan. 28 that the company's would not experience any supply chain interruptions as a result of the incident.

"Due to our contingency supply arrangements, we are confident that we will be able to meet our customers' delivery requirements on an ongoing basis," said Paul Gaulin, Ivex's president and CEO, in a news release.

Sidney firefighters had the fire under control within an hour, Haller said. Damage to the 68,000-square-foot building was estimated at $450,000. The plant – which makes polyethylene foam and air bubble cushioning – opened in 2005 as ProtecPac, which later changed its name to Ivex.

Ivex said the fire and explosion took place at the smaller of two manufacturing facilities it operates in Sidney. Only part of the Stolle Ave. production facility — the PE foam sheet extrusion line -- was affected. The facility also houses a foam plank converting operation that was not impacted.

Gaulin called the plant "a state-of-the art facility which utilized a sophisticated gas detector and an updated sprinkler system.

"We are in the process of determining the cause of the explosion so that we can address the issue and get the production line running as quickly as possible," Gaulin said in the release.

The plant employs 19 production workers, with six dedicated to that line.

Ivex also has a 100,000 square foot facility on Campbell Street in Sidney, which manufactures air cushioning, protective mailers, and another conversion line. That facility was not in close proximity to the other and is continuing to operate.


Comments

Two workers hurt in explosion at Ivex foam plant

By Frank Esposito
Senior Staff Reporter

Published: January 28, 2013 1:24 pm ET
Updated: January 28, 2013 5:36 pm ET

Post Your Comments


Back to story


More stories

Image

Denmark's Faerch Plast looks to expand packaging market beyond Europe

April 16, 2015 10:52 am ET

Denmark-based Faerch Plast A/S, a food packaging company, has announced it plans to target Australia, New Zealand, the Middle East, the U.S., Canada, ...    More

Image

Japanese purchase expands global reach for Australia's bio-based Plantic

April 15, 2015 11:37 am ET

Australian bio-based barrier film developer Plantic Technologies Ltd. has been sold to a Japanese barrier film manufacturer.    More

Image

Wording change means Oxford won't ban PS packaging after all

April 15, 2015 10:50 am ET

Leading organizations in the plastics industry have hailed the reversal of a decision to ban polystyrene takeout boxes in Oxford, England, as...    More

Market Reports

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Upcoming Plastics News Events

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 15, 2015 - September 17, 2015Plastics Caps & Closures - September 2015

More Events